{"product_id":"qbp319477","title":"Garmin Flush Mount Gasket, for GNX 120","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12239-00 is a flush-mount gasket for the GNX 120 large-format marine instrument.\u003c\/p\u003e\u003cp\u003eIt sits between the instrument and the mounting surface so the bezel beds down cleanly on a flat panel. This helps close up small gaps around the cutout and reduces the chance of water tracking behind the dashboard.\u003c\/p\u003e\u003cp\u003eThis is a practical replacement when you are re-installing a GNX 120 after service, moving it to a new panel, or swapping out a gasket that has taken a set from long-term compression.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Garmin GNX 120 flush-mount installations\u003c\/li\u003e\n\u003cli\u003eHelps seal the instrument-to-panel interface around the cutout\u003c\/li\u003e\n\u003cli\u003eTakes up minor panel irregularities for a cleaner finished edge\u003c\/li\u003e\n\u003cli\u003eUseful replacement part during re-bedding or relocation\u003c\/li\u003e\n\u003cli\u003ePhysical mounting accessory that does not change wiring or network connections\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eUse the GNX 120 flush-mount template for the panel cutout and hole locations. The template layout calls for a 44 mm (1 3\/4 in.) center hole for cable routing and 4.5 mm (3\/16 in.) mounting holes.\u003c\/p\u003e\u003cp\u003eFit the gasket to the back of the instrument before inserting the unit into the cutout, then tighten the hardware from behind the panel. A thin bead of marine sealant around the gasket is commonly used to keep any spray or washdown from finding a path behind the dashboard.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCompatible with Garmin GNX 120. The instrument footprint is 181 x 115 x 17 mm (7.13 x 4.53 x 0.7 in.), so confirm you have clearance behind the panel for cabling and for tightening hardware.\u003c\/p\u003e\u003cp\u003eThe mounting surface should be flat so the gasket compresses evenly. If the area is curved or heavily textured, plan on a mounting approach that creates a flat sealing face at the instrument opening.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIf you remove the instrument, inspect the gasket for tears or permanent flattening. Replacing it during re-bedding helps avoid slow seepage around the cutout later. Clean the mating surfaces before reassembly so the gasket seats evenly.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269123174581,"sku":"QBP319477","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299091_qbp319477.jpg?v=1771542027","url":"https:\/\/www.qualityboatparts.com\/products\/qbp319477","provider":"Quality Boat Parts","version":"1.0","type":"link"}