{"product_id":"qbp318556","title":"Garmin GPSMAP 500 Series Second Mounting Station, Wiring Harness, NMEA 0183, CANet, Transducer Connection","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10930-00 is a second mounting station for GPSMAP 500 Series chartplotters, adding another fixed location on board for a compatible display. It is commonly used when you want the same model installed at a second station, such as a flybridge and lower helm, or a helm and nav table.\u003c\/p\u003e\u003cp\u003eA wiring harness is included to power the unit and to support connections to an optional NMEA 0183 network, a CANet device, and a transducer. This helps keep the second station setup consistent with the way the chartplotter is typically integrated on a boat.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdds an additional mounting station for Garmin GPSMAP 500 Series chartplotters\u003c\/li\u003e\n\u003cli\u003eIncludes a wiring harness for power and system connections at the second location\u003c\/li\u003e\n\u003cli\u003eSupports connection to an optional NMEA 0183 network\u003c\/li\u003e\n\u003cli\u003eSupports connection to CANet devices\u003c\/li\u003e\n\u003cli\u003eSupports connection to a transducer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mounting station is intended for the Garmin GPSMAP 500 Series. Confirm your chartplotter family before ordering, since mounts and harnesses are model-specific across generations.\u003c\/p\u003e\u003cp\u003eWhen planning the location, allow space for cable routing and for the harness to be supported behind the mounting surface so the connections are not carrying strain from vibration or repeated access.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eInstall the station where the display is easy to view and operate underway, and where it can be accessed from behind for wiring. On open boats, routing the harness through a protected chase and forming a drip loop before the connection point helps keep water from tracking down the cable.\u003c\/p\u003e\u003cp\u003ePower should be tied into your DC system based on the chartplotter’s requirements, with clean wiring runs and secure strain relief so the harness stays stable in chop and engine vibration.\u003c\/p\u003e\u003ch6\u003eNetwork connections\u003c\/h6\u003e\u003cp\u003eIf you are tying the second station into existing electronics, the harness supports optional NMEA 0183 connections for compatible instrument and data sharing setups. It also supports CANet connections for compatible devices, and a transducer connection when the installation calls for it.\u003c\/p\u003e\u003cp\u003eThis setup is a good match for boats that already rely on a GPSMAP 500 Series display and need that same interface available at another operating position without changing the way the system is wired.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSecond mounting station\u003c\/li\u003e\n\u003cli\u003eWiring harness\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269000392885,"sku":"QBP318556","price":45.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298725_qbp318556.jpg?v=1771541386","url":"https:\/\/www.qualityboatparts.com\/products\/qbp318556","provider":"Quality Boat Parts","version":"1.0","type":"link"}