{"product_id":"qbp308842","title":"Attwood Marine Vinyl Grab Handle, One-Piece, 7-1\/2 in Hole Centers, Hinged Fastener Covers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine Vinyl Grab Handle is a one-piece boat grab handle made for adding a steady handhold on runabouts, fishing boats, jet boats, and similar marine or RV installations. It uses a polypropylene inner core with a molded vinyl cover, giving the handle structure while keeping the grip comfortable in everyday use around the cockpit, cabin entry, side panels, or deck-adjacent areas.\u003c\/p\u003e\u003cp\u003eThe handle has a molded, hinged fastener cover system built into the base. After the handle is secured, the covers close over the mounting points, so there are no separate caps to pop off and get lost. It installs with two #12 fasteners, using thru-bolting or wood screws, and the mounting hole pattern is 7-1\/2 inches on center.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne-piece vinyl grab handle for adding a secure handhold on boats, jet boats, runabouts, and RVs.\u003c\/li\u003e\n\u003cli\u003ePolypropylene inner core with a molded vinyl cover for use in demanding marine environments.\u003c\/li\u003e\n\u003cli\u003eHinged fastener covers hide the mounting hardware and avoid loose removable caps.\u003c\/li\u003e\n\u003cli\u003eShaped grip gives the hand a natural hold when boarding, moving through the cockpit, or bracing in choppy conditions.\u003c\/li\u003e\n\u003cli\u003eInstalls with two #12 fasteners using thru-bolting or wood screws, depending on the mounting surface.\u003c\/li\u003e\n\u003cli\u003e7-1\/2 inch center-to-center mounting hole pattern fits many common replacement and new-install locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis grab handle is offered in two color configurations for matching different deck layouts, upholstery colors, console panels, or existing hardware.\u003c\/p\u003e\u003cp\u003eThe color is the variant attribute that changes between these options. The one-piece handle construction, molded vinyl cover, hinged fastener covers, #12 fastener installation, and 7-1\/2 inch mounting hole spacing remain consistent across the listed variants.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2050-5: Color White. The white version works well with light gelcoat, white seating areas, and clean cockpit layouts where the handle should blend into the surrounding surface.\u003c\/li\u003e\n\u003cli\u003e2054-5: Color Black. The black version pairs with darker trim, black canvas, console panels, or hardware where a stronger visual contrast is preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eMount the handle to a flat, solid surface that can support the load placed on a handhold. Thru-bolting is the stronger method where the back side of the panel is accessible, while wood screws can be used where the installation surface is suitable for that fastening method. The 7-1\/2 inch hole spacing is useful when replacing an older grab handle or laying out multiple handles with a consistent pattern.\u003c\/p\u003e\u003cp\u003eBecause the fastener covers are hinged into the handle base, the hardware can be covered after installation without separate trim caps. This helps keep the finished installation tidy and reduces the chance of small parts coming loose over time.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis handle is a practical match for cockpit sides, companionway areas, small cabin entries, helm-adjacent panels, and passenger seating zones where people need a simple place to steady themselves. It is especially useful on smaller powerboats and fishing boats where movement around the deck can be quick and space is limited.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the handle with fresh water after saltwater use and clean the vinyl cover with mild soap when needed. Avoid harsh solvents or abrasive pads that can damage the surface. During routine boat checks, confirm that the mounting fasteners remain tight and that the hinged covers are fully closed.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"White","offer_id":52581897240757,"sku":"QBP308842-V1","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":52581897273525,"sku":"QBP308842-V2","price":11.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332809_qbp308842.jpg?v=1780201387","url":"https:\/\/www.qualityboatparts.com\/products\/qbp308842","provider":"Quality Boat Parts","version":"1.0","type":"link"}