{"product_id":"qbp299217","title":"Garmin Radar Voltage Converter Unit, For GMR 404\/406\/604\/606 Open Array Radars, 10-40 VDC, Includes 18 in Input Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin S11-01315-30 is a voltage converter unit used to power compatible Garmin GMR open-array radar pedestals from a 10 to 40 VDC boat supply, delivering 36 VDC to the radar.\u003c\/p\u003e\u003cp\u003eIt installs in-line between your vessel's DC distribution and the radar power cable, and it is specified for GMR 404, GMR 406, GMR 604, and GMR 606 open-array radar systems.\u003c\/p\u003e\u003cp\u003eThe converter input should be fed through a 15 A slow-blow fuse, and the in-line fuse in the radar power cable should remain in place. This unit is intended for the radar power run, not as a general-purpose DC-DC converter for onboard loads.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConverts 10 to 40 VDC input to a 36 VDC output for supported open-array radar pedestals\u003c\/li\u003e\n\u003cli\u003eSpecified for Garmin GMR 404, GMR 406, GMR 604, and GMR 606 open-array radars\u003c\/li\u003e\n\u003cli\u003eInput side is protected with a 15 A slow-blow fuse requirement\u003c\/li\u003e\n\u003cli\u003eConverter housing can be bonded to the vessel's RF ground\u003c\/li\u003e\n\u003cli\u003eIncludes an 18 in input cable for the power feed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis converter is part of the radar power path on the supported GMR open-array models. It does not replace the Garmin Marine Network cable used for data between the radar and the display.\u003c\/p\u003e\u003cp\u003eIf you are replacing an existing converter, confirm the radar model and plan your mounting location so the converter can sit close to the DC source while still reaching the radar power lead without strained wiring or chafe points.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the converter in a dry, accessible location near the power source so the input run stays short and the fuse remains easy to service. Secure the unit so it cannot move under vibration or pound in rough water.\u003c\/p\u003e\u003cp\u003eBring power from the boat supply to the converter input through a 15 A slow-blow fuse. Connect the converter output red and black leads to the radar power cable red and black leads using sealed, heat-shrink style crimps, and keep the radar cable fuse in place.\u003c\/p\u003e\u003cp\u003eBonding the converter housing to the vessel's RF ground can help reduce electrical noise issues that show up as intermittent radar behavior on boats with busy DC systems.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good fit for refits and replacements where a GMR 404\/406\/604\/606 open-array radar is being installed or serviced and the system requires the external converter stage in the power run. It is also commonly swapped when troubleshooting a no-power condition that traces back to the converter unit.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eVoltage converter unit\u003c\/li\u003e\n\u003cli\u003e18 in input cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269166624949,"sku":"QBP299217","price":226.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299309_qbp299217.jpg?v=1771542318","url":"https:\/\/www.qualityboatparts.com\/products\/qbp299217","provider":"Quality Boat Parts","version":"1.0","type":"link"}