{"product_id":"qbp286795","title":"Garmin OnDeck Relay Switch, For OnDeck Hub, 12V, 15A Max","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13009-01 is a 12 Vdc relay switch that adds remote on and off control to a DC circuit when used with a Garmin OnDeck Hub and the ActiveCaptain app.\u003c\/p\u003e\u003cp\u003eIt’s built for 12 V electrical systems where the OnDeck Hub input power is between 10 and 15.6 Vdc. The relay coil operates from 7.8 to 15.6 Vdc, and the switched contacts are rated up to 15 A at 10 to 16 Vdc (up to 9 A at 20 to 32 Vdc), so it works well for moderate onboard loads when you want app control without running heavier wiring up to a switch panel.\u003c\/p\u003e\u003cp\u003eOnDeck can support adding up to five relay switches, which helps expand control beyond the basics for boats that want multiple circuits available in the app.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRemote switching through the Garmin OnDeck Hub using the ActiveCaptain app\u003c\/li\u003e\n\u003cli\u003eOnDeck Hub power compatibility range: 10 to 15.6 Vdc (12 V system requirement)\u003c\/li\u003e\n\u003cli\u003eControl coil voltage range: 7.8 to 15.6 Vdc\u003c\/li\u003e\n\u003cli\u003eContact rating: up to 15 A at 10 to 16 Vdc, or up to 9 A at 20 to 32 Vdc\u003c\/li\u003e\n\u003cli\u003eSupports expanding an OnDeck installation with up to five relay switches\u003c\/li\u003e\n\u003cli\u003eSimple four-lead wiring with color-coded control and load wires\u003c\/li\u003e\n\u003cli\u003eRelay operating temperature range: -15 to 85°C (storage: -40 to 155°C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eMount the relay in a dry, protected location such as an electronics locker, console, or cabin space. Avoid bilge areas, open cockpits, or compartments that regularly take spray, since the relay should be kept dry.\u003c\/p\u003e\u003cp\u003eFor the control side, the relay uses a negative control lead and a positive control lead. Connect the relay’s white control wire to the appropriate relay output wire from the OnDeck Hub IN\/OUT harness, then feed the relay’s black control wire from the same DC source that powers the OnDeck Hub, protected by a 1 A fuse.\u003c\/p\u003e\u003cp\u003eFor the load side, place the relay in the positive feed to the device you want to control. Connect the device’s positive lead to the relay’s blue load wire, connect the relay’s yellow load wire to the positive side of the device’s power source, and complete the circuit by returning the device’s negative lead to the negative side of the power source. Use wire gauge that matches the controlled circuit and keep all connections secure for vibration.\u003c\/p\u003e\u003ch6\u003eElectrical considerations\u003c\/h6\u003e\u003cp\u003eBefore wiring, confirm the device’s current draw and any startup surge stays within the relay contact rating. Protect the load circuit with the correct fuse or breaker for the wiring and the equipment, and route wires so they are supported, protected from chafe, and easy to inspect later.\u003c\/p\u003e\u003ch6\u003eCompatibility and system notes\u003c\/h6\u003e\u003cp\u003eThis is the 12 V relay version and it’s intended for OnDeck installations powered in the 10 to 15.6 Vdc range. If your OnDeck Hub is powered from a 24 V system, use a 24 V relay instead.\u003c\/p\u003e\u003cp\u003eAfter wiring, set up the relay channel in the ActiveCaptain app to control the circuit remotely and include it in any rules or alerts you already run in your OnDeck setup.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eTypical uses include switching deck or cockpit lights, a cabin fan, a spreader light, or other on and off accessories where it helps to have control from the dock or while you are away from the boat. It fits owners who already have a Garmin OnDeck Hub installed and want a few additional controllable circuits without rebuilding their switch panel.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269133136053,"sku":"QBP286795","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299369_qbp286795.jpg?v=1771542107","url":"https:\/\/www.qualityboatparts.com\/products\/qbp286795","provider":"Quality Boat Parts","version":"1.0","type":"link"}