{"product_id":"qbp268587","title":"Garmin GET 10 NMEA 2000 Engine Tilt\/Trim Analog Adapter, For GMI 10","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11325-00 is an engine tilt adapter that converts a traditional analog trim\/tilt signal into NMEA 2000 data so you can view engine-tilt information on compatible Garmin displays connected to your NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eIt is powered from the NMEA 2000 bus (9 to 16 Vdc) with a maximum NMEA 2000 power usage of 1 W (LEN 2, 100 mA). The assembly has a total cable length of 16 ft (4.9 m), and the adapter body measures 31\/32 in x 43\/64 in x 3 3\/32 in (24.7 x 17.0 x 78.6 mm).\u003c\/p\u003e\u003cp\u003eThe housing meets IEC 60529 IPX7 for washdowns and occasional splashes, and it is intended for locations where it will not be submerged on a regular basis. This is a practical fit for boats that already have a working trim\/tilt sender or gauge and want that information available on the NMEA 2000 network without changing the sender style.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBrings analog engine trim\/tilt information onto a NMEA 2000 network for viewing on compatible Garmin instruments and chartplotters.\u003c\/li\u003e\n\u003cli\u003eSupports wiring to an analog gauge or directly to the engine-tilt sensor, using the built-in bare-wire harness.\u003c\/li\u003e\n\u003cli\u003eWorks with resistive sender signals and with generic voltage sender signals from 0 to 5 Vdc (wiring method varies by sensor type).\u003c\/li\u003e\n\u003cli\u003ePowered by the NMEA 2000 bus (9 to 16 Vdc), with 1 W maximum power usage and LEN 2 (100 mA).\u003c\/li\u003e\n\u003cli\u003eIEC 60529 IPX7 waterproof rating for washdown locations when not installed where it will be submerged regularly.\u003c\/li\u003e\n\u003cli\u003eTotal cable length of 16 ft (4.9 m) to help reach from the engine or helm area to the NMEA 2000 backbone.\u003c\/li\u003e\n\u003cli\u003eCompass safe distance: 2 in (5 cm).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so the adapter sits between the NMEA 2000 backbone and the existing gauge or sender, and keep it within 173 in (4.4 m) of the gauge or engine-tilt sensor to avoid splicing bare wires. The unit can be secured to existing structure with cable ties or fastened to a bulkhead using appropriate mounts and hardware (mounting hardware is not part of the adapter).\u003c\/p\u003e\u003cp\u003eOn the NMEA 2000 side, the adapter connects through a T-connector on the backbone. If the adapter cannot reach the backbone directly, a NMEA 2000 drop cable up to 20 ft (6 m) can be used between the T-connector and the adapter.\u003c\/p\u003e\u003cp\u003eAfter wiring, engine-tilt calibration is completed from the connected Garmin display via the NMEA 2000 device list. Multi-engine installations can be set so each adapter reports the correct engine number on the network.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThis adapter is intended for boats using an analog trim\/tilt gauge or a trim\/tilt sender that you can access at the gauge or at the engine. It is commonly used on outboards and inboard\/outboard drives that have trim control and a separate sender signal, where you want the trim\/tilt data available on the NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eBecause the adapter draws its power from the NMEA 2000 bus, correct network power and backbone layout matter. If you are expanding an existing NMEA 2000 backbone, add the T-connector and connect the adapter as another device rather than adding a second network power feed.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGET 10 engine tilt adapter with attached cable and bare-wire harness\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52268991971509,"sku":"QBP268587","price":249.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298775_qbp268587.jpg?v=1771541341","url":"https:\/\/www.qualityboatparts.com\/products\/qbp268587","provider":"Quality Boat Parts","version":"1.0","type":"link"}