{"product_id":"qbp264912","title":"Raymarine SeaTalk Alarm Out Cable, For E-Classic and G-Series, 1.5m, 6-Pin Twist-Lock","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Raymarine E55054 is a 1.5 m SeaTalk alarm out cable for connecting compatible Raymarine displays to a SeaTalk instrument network and an external alarm circuit. It is used when a helm display needs to interface with existing SeaTalk instruments while also feeding an alarm output to another device on board.\u003c\/p\u003e\u003cp\u003eOne end uses a 6-pin twist-lock connector for the display connection, while the opposite end terminates in wire leads for integration into the vessel wiring. The 1.5 m length suits short runs behind a helm, electronics box, nav station, or console where the display, SeaTalk wiring, and alarm connection are mounted close together.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1.5 m cable length for compact helm and console installations\u003c\/li\u003e\n\u003cli\u003eConnects compatible Raymarine E-Series displays to Raymarine SeaTalk instrument networks\u003c\/li\u003e\n\u003cli\u003eAlso supports connection to an external alarm circuit for better audible or remote alert awareness on board\u003c\/li\u003e\n\u003cli\u003e6-pin twist-lock connector at the display end helps keep the connection secure in a high-vibration marine electronics area\u003c\/li\u003e\n\u003cli\u003eWire leads at the opposite end give installers flexibility when routing into existing SeaTalk and alarm wiring\u003c\/li\u003e\n\u003cli\u003eSuitable for E-Classic and G-Series Raymarine systems where this SeaTalk alarm out connection is required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis cable is typically installed behind the multifunction display or inside the helm wiring space, where it can be kept protected from foot traffic, loose gear, and unnecessary strain. Leave enough service loop to remove or tilt the display for future access without pulling on the twist-lock connector or wire leads.\u003c\/p\u003e\u003cp\u003eBefore wiring, match the cable to the display model and the vessel’s existing SeaTalk layout. Alarm output connections should be made with proper marine electrical practices, including secure terminations, strain relief, and protection from moisture where the wire leads are joined into the boat’s wiring.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a system-specific Raymarine cable, not a general-purpose NMEA 2000, Ethernet, or power cable. It is intended for SeaTalk alarm output use with compatible Raymarine displays, including E-Classic and G-Series installations that call for this connection type.\u003c\/p\u003e\u003cp\u003eIt is a good match for owners refitting an older Raymarine network, replacing a missing alarm out lead, or adding an external alarm connection to an existing display setup. For mixed-brand electronics or newer network architectures, confirm the required interface before installation.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eOn cruising boats, sportfishing boats, and sailboats with legacy Raymarine electronics, this cable helps keep instrument network data and alarm signaling tied into the helm area. It is especially useful where the display is part of the vessel’s navigation workflow and the crew wants important alerts available beyond the display screen itself.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":52023850205365,"sku":"QBP264912","price":69.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1330908_qbp264912.jpg?v=1780192039","url":"https:\/\/www.qualityboatparts.com\/products\/qbp264912","provider":"Quality Boat Parts","version":"1.0","type":"link"}