{"product_id":"qbp254056","title":"Simrad Gimbal Bracket Knobs, For NSS\/NSS evo2, Zeus2, HDS Gen2 Touch, Elite-7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-10467-001 is a replacement set of bracket mounting knobs used to secure compatible displays on their swivel bracket at the helm.\u003c\/p\u003e\u003cp\u003eIt is used with Simrad NSS series and is also compatible with Lowrance Elite-7 and HDS Gen2 Touch units. It is also used on Simrad NSS evo2 and B\u0026amp;G Zeus2 bracket-mounted installations. When your boat is bouncing in chop, properly tightened knobs help keep the screen where you set it instead of slowly sagging or shifting.\u003c\/p\u003e\u003cp\u003eThis is the right part when the original knobs are missing, cracked, or no longer hold tension. If your display is flush mounted or panel mounted, these knobs are not part of that install.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eReplacement bracket knobs for Simrad NSS series bracket-mounted installations\u003c\/li\u003e\n\u003cli\u003eCompatible with Lowrance Elite-7 and HDS Gen2 Touch units\u003c\/li\u003e\n\u003cli\u003eAlso used with Simrad NSS evo2 and B\u0026amp;G Zeus2 bracket-mounted setups\u003c\/li\u003e\n\u003cli\u003eHelps keep the display angle locked in place when the boat is seeing vibration and repeated shock loads\u003c\/li\u003e\n\u003cli\u003eSimple hardware swap when knobs are worn, missing, or no longer tighten smoothly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThese knobs are intended for bracket mounts that clamp the display between two side arms and tighten by hand. Match compatibility to the display family listed above, and confirm your bracket uses the same knob style before ordering.\u003c\/p\u003e\u003cp\u003eIf you are replacing knobs after a rewire or electronics upgrade, check that the bracket arms are not bent and that the friction surfaces are clean. A bent bracket can feel like a knob problem because it will not hold angle evenly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRemove the old knobs, align the bracket arms with the display side mounts, then thread the new knobs on by hand until snug. Set your viewing angle and re-tighten so both sides feel even.\u003c\/p\u003e\u003cp\u003eAfter the first run, re-check tightness once the boat has been through some movement. Avoid over-tightening, especially on plastic bracket arms, so you do not strip threads or distort the mount.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part makes sense for boats that rely on a bracket-mounted chartplotter or fishfinder at the helm, on a small console, or under a T-top where the screen angle gets adjusted often. It is also a practical spare to keep on board if you trailer, remove displays for security, or do frequent rigging work.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the area with fresh water after saltwater use and periodically check that the knobs still tighten smoothly. If grit builds up around the threads, back the knobs off and clean the contact points before re-installing.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269669384373,"sku":"QBP254056","price":18.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1300956_qbp254056.jpg?v=1771545144","url":"https:\/\/www.qualityboatparts.com\/products\/qbp254056","provider":"Quality Boat Parts","version":"1.0","type":"link"}