{"product_id":"qbp243189","title":"Attwood Marine LightArmor LED Navigation Lights, Vertical Surface Mount, Stainless Steel, 2NM","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine LightArmor LED navigation light is a 2 NM vertical surface-mount sidelight range for port, starboard, or paired red\/green installations on 12V boats. It uses an LED light engine in a round stainless steel housing, giving the bow area a clean low-profile look while keeping the red and green navigation sectors clear and easy to identify.\u003c\/p\u003e\u003cp\u003eThese lights are made for vessels up to 65 ft (20 m) where 2 nautical mile side visibility is required. The housing is water-resistant to IP67, the LEDs are rated for 50,000+ hours, and the LightArmor layout includes color-indicated cores to help reduce wiring mistakes during installation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2 NM USCG-certified visibility for port and starboard side navigation lighting.\u003c\/li\u003e\n\u003cli\u003eVertical surface-mount format for installation on flat bow or hull-side mounting areas.\u003c\/li\u003e\n\u003cli\u003eRound stainless steel housing with a compact footprint that fits well on modern fiberglass and aluminum boats.\u003c\/li\u003e\n\u003cli\u003e12V LED operation with a light engine that stays cool during use.\u003c\/li\u003e\n\u003cli\u003eIP67 water-resistant construction for exposed bow locations that see spray, rain, and washdowns.\u003c\/li\u003e\n\u003cli\u003eRated LED service life of 50,000+ hours for low-maintenance navigation lighting.\u003c\/li\u003e\n\u003cli\u003eSharper cut-off angles help separate the red and green sectors for proper port and starboard visibility.\u003c\/li\u003e\n\u003cli\u003eColor-indicated cores support cleaner installation and easier service checks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis LightArmor vertical mount navigation light is offered in three configurations for different bow-light layouts.\u003c\/p\u003e\u003cp\u003eThe main difference is the side and lens color. The stainless steel round housing, vertical mount style, LED lighting, 12V operation, and 2 NM rating remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNV3012SSG-7: Side light with starboard green lens color. This configuration is used on the starboard side of the vessel where a green navigation sector is required.\u003c\/li\u003e\n\u003cli\u003eNV3012SSR-7: Side light with port red lens color. This configuration is used on the port side of the vessel where a red navigation sector is required.\u003c\/li\u003e\n\u003cli\u003eNV3012SS-1: Side light set with red\/green lens color. This paired configuration covers both port and starboard side lighting for a matching bow installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThese lights are intended for vertical surface mounting, so the mounting face should be flat, clean, and positioned where the light sectors are not blocked by rails, trolling motors, anchors, bow pulpits, canvas, or deck hardware. They are a practical fit for bow side-light replacements on center consoles, runabouts, fishing boats, and small cruisers that use separate red and green side lights.\u003c\/p\u003e\u003cp\u003eBecause the lights are used in exposed areas, wiring should be protected with proper marine connectors, strain relief, and a sealed wire exit. Confirm the vessel wiring is 12V and check the existing light footprint before drilling new holes or reusing previous mounting points.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis range is a good match for owners replacing worn vertical sidelights or upgrading to LED navigation lights with stainless steel housings. The 2 NM rating and 20 m vessel guidance make it suitable for many recreational boats used for evening returns, early departures, coastal cruising, and fishing runs where clear navigation light visibility matters.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the stainless housing and lens with fresh water after saltwater use, especially around the mounting edge and fasteners. Keep the lens clear of wax buildup, salt film, and cover residue so the red or green sector remains visible and the cut-off pattern stays clean.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eNV3012SSR-7\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eNV3012SS-1\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eNV3012SSG-7\u003c\/span\u003e","brand":"Attwood Marine","offers":[{"title":"Port Red","offer_id":53765458133173,"sku":"QBP243189-V3","price":52.99,"currency_code":"USD","in_stock":true},{"title":"Red\/Green","offer_id":53765458165941,"sku":"QBP243189-V1","price":107.3,"currency_code":"USD","in_stock":false},{"title":"Starboard Green","offer_id":53765458198709,"sku":"QBP243189-V2","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1327471_qbp243189.webp?v=1794612510","url":"https:\/\/www.qualityboatparts.com\/products\/qbp243189","provider":"Quality Boat Parts","version":"1.0","type":"link"}