{"product_id":"qbp230568","title":"Lumitec SeaBlazeX2 LED Underwater Light, 10-30V, IP68, 6000+ Lumens, 60W, Surface Mount, 3.8in Diameter, No External Drivers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec SeaBlazeX2 is a surface-mount LED underwater light that runs on 10-30 vDC (12V or 24V systems) and uses an IP68-rated sealed housing for continuous submersion.\u003c\/p\u003e\u003cp\u003eWhite output is rated at 6,000 lumens while drawing 5A at 12V DC or 2.5A at 24V DC (60W). The light face is 3.94 in in diameter and the body sits about 0.85 in off the hull, with a 1\/2 in cable pass-through through the transom.\u003c\/p\u003e\u003cp\u003eIt is offered in dual-color White\/Blue or full-color RGBW Spectrum, with Bronze Finish or Polished Finish options to match your transom hardware and overall look.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30 vDC input for 12V and 24V boats; 5A at 12V DC or 2.5A at 24V DC (60W).\u003c\/li\u003e\n\u003cli\u003e6,000-lumen white output with 6500 CCT and CRI 70+ (white light).\u003c\/li\u003e\n\u003cli\u003eIP68-rated sealing for underwater mounting and regular washdowns.\u003c\/li\u003e\n\u003cli\u003eSolid naval bronze housing with a heat-tempered glass lens.\u003c\/li\u003e\n\u003cli\u003eSurface-mount footprint: 3.94 in diameter, 0.85 in depth; 1\/2 in cable pass-through.\u003c\/li\u003e\n\u003cli\u003eTwo-wire or three-wire wiring options; orange signal wire supports PLI control and draws up to 0.1A per light.\u003c\/li\u003e\n\u003cli\u003eDedicated circuit protection commonly uses up to a 7.5A fuse per light.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eSeaBlazeX2 is available in multiple combinations of light output and finish.\u003c\/p\u003e\u003cp\u003eAcross the range, the mounting footprint, 10-30 vDC input, 6,000-lumen white output, 60W draw, and IP68 sealing remain consistent; the difference is the color output (RGBW Spectrum or White\/Blue) and the exterior finish (Bronze Finish or Polished Finish).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101515: Light Color RGBW with Bronze Finish. RGBW Spectrum runs a color cycle and lets you lock a color with a quick off\/on toggle.\u003c\/li\u003e\n\u003cli\u003e101516: Light Color White\/Blue with Bronze Finish. White\/Blue steps through cross-fade, blue-only, and white-only with quick off\/on toggles.\u003c\/li\u003e\n\u003cli\u003e101591: Light Color RGBW with Polished Finish. Polished Finish uses plated bronze for a bright look on the transom.\u003c\/li\u003e\n\u003cli\u003e101592: Light Color White\/Blue with Polished Finish. This version keeps the same electrical and mounting footprint while pairing White\/Blue output with the polished exterior.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSBX2 light with 5 ft of 18 AWG wire\u003c\/li\u003e\n\u003cli\u003e3 silicon bronze screws (#10 x 1.5 in)\u003c\/li\u003e\n\u003cli\u003eRubber strain relief\u003c\/li\u003e\n\u003cli\u003eInstruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSeaBlazeX2 mounts from the outside of the transom with a small 1\/2 in hole for the cable. Plan the location so the light sits on a flat section of hull and stays clear of trim tabs, rudders, and other running gear.\u003c\/p\u003e\u003cp\u003eA common placement is 6 to 12 in below the waterline on the transom. Bed the bezel and cable stem in a marine sealant such as 3M 4200, then tighten the screws by hand to avoid cracking gelcoat or snapping the bronze hardware.\u003c\/p\u003e\u003cp\u003eInside the hull, seal the cable pass-through and install the strain relief to protect the wiring where it exits the transom.\u003c\/p\u003e\u003ch6\u003eElectrical and control\u003c\/h6\u003e\u003cp\u003ePower is 10-30 vDC, so it fits 12V and 24V boats without a separate driver. At full output it draws 5A at 12V DC or 2.5A at 24V DC, and each light is typically protected on its own circuit with a fuse up to 7.5A.\u003c\/p\u003e\u003cp\u003eWiring can be done as a standard two-wire install by tying the red and orange leads together at the switch, or as a three-wire setup with constant power on red\/black and a switched feed on the orange signal wire. The orange signal wire draws up to 0.1A per light and supports PLI control when tied into compatible digital switching.\u003c\/p\u003e\u003cp\u003eDual-color White\/Blue versions step through cross-fade, blue-only, and white-only with quick power toggles. RGBW Spectrum versions cycle through available colors on power-up and allow a fixed color selection using quick off\/on toggles.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe housing is solid naval bronze with a heat-tempered glass lens, and the assembly is rated IP68 for continuous submersion. It handles vibration and the regular spray that transom gear sees in day-to-day use.\u003c\/p\u003e\u003cp\u003eIf mounting to metal hulls or near dissimilar metals, follow standard isolation and bonding practices to reduce galvanic corrosion risk.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis light fits boats that want a strong underwater wash for the swim area, transom lighting at anchor, or better visibility around the stern at night. White output is useful when checking the waterline and working dockside, while blue modes are often used for night ambiance.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the lens after saltwater runs and wipe it with a soft cloth. If growth builds up, clean gently and avoid abrasive pads that can scratch the glass and reduce light output.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"RGBW \/ Bronze Finish","offer_id":52270646526133,"sku":"QBP230568-V1","price":706.59,"currency_code":"USD","in_stock":true},{"title":"White\/Blue \/ Bronze Finish","offer_id":52270646558901,"sku":"QBP230568-V2","price":477.09,"currency_code":"USD","in_stock":true},{"title":"RGBW \/ Polished Finish","offer_id":52270646591669,"sku":"QBP230568-V3","price":771.89,"currency_code":"USD","in_stock":true},{"title":"White\/Blue \/ Polished Finish","offer_id":52270646624437,"sku":"QBP230568-V4","price":526.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1303325_qbp230568.jpg?v=1771550160","url":"https:\/\/www.qualityboatparts.com\/products\/qbp230568","provider":"Quality Boat Parts","version":"1.0","type":"link"}