{"product_id":"qbp229813","title":"Lumitec Square Mirage LED Down Light, 10-30V, IP67, 2 in Cutout, Flush Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec Square Mirage Downlight is a flush-mount, low-profile square LED downlight for overhead lighting on 10-30V DC systems, sealed to IP67 for wet cabins, cockpits, and other exposed areas.\u003c\/p\u003e\u003cp\u003eAt full output it draws 6W and produces up to 380 lumens in white mode. Plan around a face size of 3.45 inches with bezel styles, or 2.59 inches on the glass-front option, with about 1.1 inches of mounting depth behind the surface.\u003c\/p\u003e\u003cp\u003eThis is a solid fit for boats that need a clean square look with a sealed fixture for washdowns, plus the option to run simple white light or add color for night running and onboard ambiance depending on the configuration.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRuns on 10-30V DC for 12V and 24V boat systems\u003c\/li\u003e\n\u003cli\u003e6W draw with up to 380 lumens in white mode\u003c\/li\u003e\n\u003cli\u003eIP67 sealed for interior or exterior overhead locations (not for permanent underwater mounting)\u003c\/li\u003e\n\u003cli\u003eLow-profile flush mount with approximately 1.1 inch mounting depth\u003c\/li\u003e\n\u003cli\u003eFace dimensions: 3.45 inches with bezel styles, 2.59 inches on the glass-front option\u003c\/li\u003e\n\u003cli\u003eSpring and butterfly clip mounting holds the fixture in the cutout without exposed fasteners\u003c\/li\u003e\n\u003cli\u003ePolarity-sensitive wiring with standard DC positive and negative leads\u003c\/li\u003e\n\u003cli\u003eTimed Toggle Protocol (TTP) control supported for mode changes using a regular on\/off switch, depending on the selected light output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis downlight is offered in multiple configurations that change the light output and the visible trim finish.\u003c\/p\u003e\u003cp\u003eLight output varies between Spectrum RGBW with dimming, warm white with dimming, white with dimming, and a white plus red and blue option where the white channel is dimmable and the red and blue modes are non-dimming. Finish varies between a glass-front look and bezel finishes in polished or white to match different headliners and hardware styles.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMounting is straightforward for typical fiberglass, wood, or composite overhead panels. Cut the opening, connect the DC supply leads, then compress the spring clips and push the light into place until it seats flush.\u003c\/p\u003e\u003cp\u003eAllow room behind the panel for the light body and the clip mechanism, and keep wiring supported so it does not chafe in vibration-prone areas such as a hardtop or T-top.\u003c\/p\u003e\u003ch6\u003eElectrical and control notes\u003c\/h6\u003e\u003cp\u003eOn a 12V system, plan for up to about 430 mA per light at full output; on 24V, up to about 250 mA. Size the fuse or breaker for the total load on the circuit and the wire run length.\u003c\/p\u003e\u003cp\u003eDimming and color behavior depend on the configuration. Dimming versions can be used with compatible DC dimming control, and multi-color versions can change modes through timed on\/off toggles so they can be run from a standard switch when a dedicated controller is not part of the system.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe sealed housing supports use in areas that see spray and routine washdowns, making it a practical choice for cockpit overheads, cabin headliners, and covered exterior ceilings. It is not intended for permanent underwater mounting.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm the cutout size, available mounting depth, and the finish style you want visible from the cabin or cockpit side, since the face dimensions differ between the glass-front and bezel options.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue from the lens and trim during routine washdowns and wipe with a soft cloth. Avoid harsh abrasives on the visible face so the finish and light surface stay clean and even.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"RGBW Dimming \/ Glass Bezel","offer_id":52270636925109,"sku":"QBP229813-V1","price":146.89,"currency_code":"USD","in_stock":true},{"title":"Warm White Dimming \/ Glass Bezel","offer_id":52270636957877,"sku":"QBP229813-V2","price":135.79,"currency_code":"USD","in_stock":true},{"title":"White Dimming\/Red\/Blue Non-Dimming \/ Glass Bezel","offer_id":52270636990645,"sku":"QBP229813-V3","price":141.79,"currency_code":"USD","in_stock":true},{"title":"RGBW Dimming \/ Polished Finish","offer_id":52270637023413,"sku":"QBP229813-V4","price":158.79,"currency_code":"USD","in_stock":true},{"title":"Warm White Dimming \/ Polished Finish","offer_id":52270637056181,"sku":"QBP229813-V5","price":130.69,"currency_code":"USD","in_stock":true},{"title":"White Dimming\/Red\/Blue Non-Dimming \/ Polished Finish","offer_id":52270637088949,"sku":"QBP229813-V6","price":139.59,"currency_code":"USD","in_stock":true},{"title":"RGBW Dimming \/ White Bezel","offer_id":52270637121717,"sku":"QBP229813-V7","price":158.89,"currency_code":"USD","in_stock":true},{"title":"Warm White Dimming \/ White Bezel","offer_id":52270637154485,"sku":"QBP229813-V8","price":139.79,"currency_code":"USD","in_stock":true},{"title":"White Dimming \/ White Bezel","offer_id":52270637187253,"sku":"QBP229813-V9","price":63.89,"currency_code":"USD","in_stock":false},{"title":"White Dimming\/Red\/Blue Non-Dimming \/ White Bezel","offer_id":52270637220021,"sku":"QBP229813-V10","price":142.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1303307_qbp229813.jpg?v=1771550104","url":"https:\/\/www.qualityboatparts.com\/products\/qbp229813","provider":"Quality Boat Parts","version":"1.0","type":"link"}