{"product_id":"qbp226642","title":"Lumitec Capri2 Flush Mount LED Flood Light, 10-30V, IP67, 16W, Two-Color, Dimmable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec Capri2 is a flush-mount LED flood and spreader light for decks, cockpits, hardtops, and other working areas on board. In white mode it produces 1,000 lumens at 16 W and runs on 10-30 VDC, so it fits common 12 V and 24 V systems.\u003c\/p\u003e\u003cp\u003eCapri2 is a dual-color light: every version gives you dimmable white plus either dimmable blue or dimmable red. Control is built in, so it can be wired as a simple 2-wire light on a standard on\/off switch and still handle dimming and color changes.\u003c\/p\u003e\u003cp\u003eThe housing is sealed to IP67 for spray and washdowns, with a die-cast aluminum body and a heat-tempered glass lens. Overall size is about 4.94 in x 1.75 in with a 1.57 in depth, which helps when planning the cutout and clearance behind the mounting surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30 VDC input for 12 V and 24 V electrical systems\u003c\/li\u003e\n\u003cli\u003e16 W, 1,000-lumen white output, 5,000 K white color temperature, CRI 70+\u003c\/li\u003e\n\u003cli\u003eCurrent draw: 1.3 A at 12 VDC, 600 mA at 24 VDC\u003c\/li\u003e\n\u003cli\u003eDual-color output with dimming using timed toggle switching, no external control module required\u003c\/li\u003e\n\u003cli\u003e2-wire hookup and third-party dimmer compatibility\u003c\/li\u003e\n\u003cli\u003eIP67 sealed body with die-cast aluminum construction and a heat-tempered glass lens\u003c\/li\u003e\n\u003cli\u003eOver-temperature protection that turns the light back on after it cools\u003c\/li\u003e\n\u003cli\u003ePLI enabled for control over the power wires when paired with compatible Lumitec lighting control\u003c\/li\u003e\n\u003cli\u003eTested for harsh environments with 2,000+ hours of ASTM B-117 salt spray testing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eCapri2 is offered in multiple configurations that change the housing finish and the secondary color output.\u003c\/p\u003e\u003cp\u003eAcross the range, the electrical range (10-30 VDC), 16 W rating, IP67 sealing, dimensions, and the 1,000-lumen white mode remain the same. Variants differ by black or white housing and whether the alternate mode is blue or red, with dimming available on both outputs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101186: Finish Black, Light color White\/Blue (dimming). The black housing blends into dark hardtops, arches, and tower structures while keeping blue available for lower-glare deck lighting.\u003c\/li\u003e\n\u003cli\u003e101099: Finish White, Light color White\/Blue (dimming). The white housing pairs well with light gelcoat and liners, with a blue mode that works well for low-key cockpit and deck use.\u003c\/li\u003e\n\u003cli\u003e101187: Finish Black, Light color White\/Red (dimming). Red output supports night operations where preserving night vision matters, with a black housing that stays visually discreet.\u003c\/li\u003e\n\u003cli\u003e101100: Finish White, Light color White\/Red (dimming). A clean look for lighter surfaces, with red available for moving around the boat after dark without blasting the cockpit with white light.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a recess-mounted light that sits flush once installed. Mounting holes are sized for #6 self-tapping screws, and the cutout should be planned so the back of the fixture has airflow. Keep at least 1 in of clearance around the sides and rear to help with heat dissipation.\u003c\/p\u003e\u003cp\u003eThe light can run warm during use, so avoid mounting to surfaces that are highly flammable or especially heat-sensitive. In exposed locations, protect the wiring connection, leave a drip loop, and keep seals clean during final fit-up.\u003c\/p\u003e\u003ch6\u003eElectrical and control\u003c\/h6\u003e\u003cp\u003eWire it as a standard DC light with positive and negative conductors. With timed toggle control, the light ramps up on start; a brief off\/on toggle during the ramp holds a dimmed level, and another quick toggle switches to the alternate color mode.\u003c\/p\u003e\u003cp\u003eIf your boat uses Lumitec PLI control, the fixture can receive control instructions over the same power wires when connected to compatible Lumitec digital lighting control hardware.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eCapri2 fits deck and spreader lighting jobs where you want a flush face and a wide flood pattern, such as under a hardtop, on a radar arch, along the cockpit coaming, or on a cabin brow. The white output is 5,000 K, which reads as a clean task light for line handling and dock work.\u003c\/p\u003e\u003cp\u003ePlan your circuit for about 1.3 A per light on a 12 V system or 600 mA per light on a 24 V system, then size wiring and fusing for the total number of fixtures on that run.\u003c\/p\u003e\u003ch6\u003eMaterials and corrosion resistance\u003c\/h6\u003e\u003cp\u003eThe body is die-cast aluminum with a glass lens, and the assembly is sealed to IP67. It has been run through ASTM B-117 salt spray testing for over 2,000 hours, which is relevant for installations that see washdowns, salt mist, and vibration.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eWhite mode works for docking, prepping gear, and working the foredeck. Blue mode suits low-key deck lighting at anchor, and red mode supports night running and cockpit movement when you want to keep night vision intact.\u003c\/p\u003e\u003cp\u003eThis light is a good match for owners who want dual-color control from a basic switch, while keeping the option to integrate into a PLI-based lighting system.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the lens and housing with fresh water after saltwater use. Clean the glass with mild soap and water, and avoid abrasive pads that can scratch the surface.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Black \/ White\/Blue Dimming","offer_id":52270635516085,"sku":"QBP226642-V1","price":220.89,"currency_code":"USD","in_stock":true},{"title":"White \/ White\/Blue Dimming","offer_id":52270635548853,"sku":"QBP226642-V2","price":216.29,"currency_code":"USD","in_stock":true},{"title":"Black \/ White\/Red Dimming","offer_id":52270635581621,"sku":"QBP226642-V3","price":228.89,"currency_code":"USD","in_stock":true},{"title":"White \/ White\/Red Dimming","offer_id":52270635614389,"sku":"QBP226642-V4","price":238.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1303276_qbp226642.jpg?v=1771550043","url":"https:\/\/www.qualityboatparts.com\/products\/qbp226642","provider":"Quality Boat Parts","version":"1.0","type":"link"}