{"product_id":"qbp220208","title":"Lumitec SeaBlaze Mini LED Underwater Light, 10-30V, IP68","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec SeaBlaze Mini is a compact, surface-mount underwater light for transoms and bracket surfaces, running on 10-30V DC and sealed to an IP68 rating. The face is 2.98 in in diameter with a low profile depth of about 0.58 in, and output depends on the color configuration, with white producing up to 890 lumens.\u003c\/p\u003e\u003cp\u003eThe housing is anodized aluminum with a heat tempered glass lens, built for constant immersion and regular washdowns. It is a common fit for skiffs, trailer boats, and dinghies where you want transom lighting without giving up much mounting space.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-30V DC input for 12V and 24V systems\u003c\/li\u003e\n\u003cli\u003eIP68 water-sealed construction for continuous underwater use\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum housing with a heat tempered glass lens\u003c\/li\u003e\n\u003cli\u003eCompact footprint: 2.98 in diameter and about 0.58 in overall depth\u003c\/li\u003e\n\u003cli\u003eSurface-mount installation with a small cable pass-through and a shallow recess for the rear stem\u003c\/li\u003e\n\u003cli\u003eActive thermal management can reduce brightness when run out of the water for extended periods\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -31 F to 131 F (-35 C to 55 C)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eSeaBlaze Mini is offered in multiple configurations to match the look and control style you want at the transom.\u003c\/p\u003e\u003cp\u003eThe main differences are light color and output behavior (single-color non-dimming versus RGBW), along with whether the package is sold as a pair.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101832: RGBW (690 lm), Pair No. This version supports full-color RGBW control and can integrate with compatible Lumitec PLI lighting control systems.\u003c\/li\u003e\n\u003cli\u003e101246: Blue Non-Dimming, Pair Yes. Blue output stays at a fixed intensity and is commonly used for atmosphere and water clarity around the stern.\u003c\/li\u003e\n\u003cli\u003e101245: White Non-Dimming (890 lm), Pair Yes. White output is a crisp 6500K and works well for general transom illumination and nighttime visibility in the water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location before drilling and confirm there is no interference with engine trim, rudder swing, trim tabs, or swim platform hardware. Mounting on running surfaces is not recommended.\u003c\/p\u003e\u003cp\u003eFor best results, place the light about 6 to 12 in (15 to 30 cm) below the waterline. Mounting deeper than 30 in (75 cm) below the waterline is not recommended.\u003c\/p\u003e\u003cp\u003eSeal every penetration thoroughly and bed the back surface with a quality polyurethane marine sealant to keep water out of the core and wiring chase.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire the light to a properly fused or breaker-protected circuit. Typical draw for the single-color versions is about 990 mA at 12V or 450 mA at 24V, so plan wiring and protection with voltage drop in mind.\u003c\/p\u003e\u003cp\u003eNon-dimming versions are intended for simple on and off control. The RGBW configuration supports color control when used with compatible Lumitec control hardware and settings.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eInspect the sealant line, fasteners, and wiring regularly, especially after the first few trips and after haul-outs. Keep bonding and onboard DC grounds in good order, since stray current and poor bonding can accelerate corrosion around underwater metal hardware.\u003c\/p\u003e\u003cp\u003eIf you paint the transom, only use coatings that are explicitly safe for aluminum on and around the housing. Avoid antifouling paints that are not aluminum-safe within about 1 in (2.5 cm) of the light.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"RGBW (690LM) \/ No","offer_id":52270633222325,"sku":"QBP220208-V1","price":248.69,"currency_code":"USD","in_stock":true},{"title":"Blue Non-Dimming \/ Yes","offer_id":52270633255093,"sku":"QBP220208-V2","price":349.39,"currency_code":"USD","in_stock":true},{"title":"White Non-Dimming (890LM) \/ Yes","offer_id":52270633287861,"sku":"QBP220208-V3","price":349.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1303224_qbp220208.jpg?v=1771549958","url":"https:\/\/www.qualityboatparts.com\/products\/qbp220208","provider":"Quality Boat Parts","version":"1.0","type":"link"}