{"product_id":"qbp209810","title":"Vimar Idea 2P 1-Way Switch, 16AX, 250V, IP40, Screw Terminal","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Idea 16016 is a 2-pole, 1-way rocker switch rated 16 AX at 250 V~ for the Vimar IDEA modular range. It has an IP40 rating for dry, protected interior locations and it is commonly used for AC switching where you want a clean, flush-mounted rocker on a finished panel.\u003c\/p\u003e\u003cp\u003eOn boats, this style of switch is typically fitted in cabins, nav stations, and electrical consoles that stay out of direct spray and washdowns. It is offered in Gray or Ivory, with or without an indicator, so you can match the faceplate and decide whether you want a visible reference point in low light. For self-ballasted lamps, observe the 200 W maximum.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-pole switching with a 1-way rocker action for AC circuits where both conductors are switched at the control point\u003c\/li\u003e\n\u003cli\u003e16 AX, 250 V~ rating suited to lighting loads that can have higher inrush than simple resistive loads\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for interior panels and bulkheads that stay dry\u003c\/li\u003e\n\u003cli\u003eIDEA modular format in a 1-module size (24.80 mm wide, 50.10 mm high) for consistent alignment in multi-gang frames\u003c\/li\u003e\n\u003cli\u003eFlush-mount installation with engage (snap) fastening for standard IDEA supports and cover frames\u003c\/li\u003e\n\u003cli\u003eScrewed terminal connections for secure wiring terminations inside a panel\u003c\/li\u003e\n\u003cli\u003eVariant options for Color (Gray or Ivory) and Indicator (with or without)\u003c\/li\u003e\n\u003cli\u003eMaximum 200 W for self-ballasted lamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis switch is offered in multiple configurations to match your panel finish and whether you want an indicator on the rocker.\u003c\/p\u003e\u003cp\u003eAcross the range, the functional format remains a 2-pole, 1-way, 16 AX, 250 V~ IDEA modular switch. The options that vary are the face color and the presence of an indicator.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVM16016: Color Gray, No Indicator. A plain rocker that keeps the panel look clean and avoids any visible glow at night.\u003c\/li\u003e\n\u003cli\u003eVM16016.B: Color Ivory, No Indicator. The same basic rocker function in a lighter face color for matching Ivory installations.\u003c\/li\u003e\n\u003cli\u003eVM16016.F: Color Gray, With Indicator. The indicator gives you a quick visual reference in low light, useful when moving through the cabin at night.\u003c\/li\u003e\n\u003cli\u003eVM16016.F.B: Color Ivory, With Indicator. Combines the lighter face color with an indicator for the same day-to-day switching function.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a 1-module mechanism intended for Vimar IDEA modular supports, frames, and cover plates. It is a good fit when the vessel already uses IDEA components and you want a matching switch body behind the finished faceplate.\u003c\/p\u003e\u003cp\u003ePanel space planning is straightforward because the module footprint stays consistent, but always confirm rear clearance behind the mounting location. The non-indicator mechanism depth is about 46.00 mm with a built-in depth around 32.50 mm, and some configurations can differ.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eThe switch mounts flush and locks in with a snap fastening into the correct IDEA support. Wiring lands on screwed terminals, which works well for tidy terminations inside a protected console or cabin switch panel.\u003c\/p\u003e\u003cp\u003eBecause this is a 250 V~ AC switch, it belongs in your vessel’s AC distribution scheme, not on typical 12 V or 24 V DC house circuits. Wire it in line with how your boat handles conductor switching and isolation on the AC side, and make sure the upstream protection and conductor sizing match the circuit being controlled.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eTypical onboard uses include switching cabin lighting circuits, controlling AC-fed accessories in an interior console, or adding a matching control point in an IDEA-fitted panel. Indicator versions are helpful where you want to locate the switch quickly in low ambient light without adding a separate locator lamp.\u003c\/p\u003e\u003cp\u003eThis product is a strong match for owners and builders standardizing on Vimar IDEA modules who need a 2-pole switch format for an AC branch circuit in a dry interior location.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the switch out of direct spray and away from wet lockers or exterior helm positions, since IP40 is not a washdown rating. For cleaning, wipe the rocker and faceplate with a lightly damp cloth and avoid aggressive solvents that can haze or soften thermoplastic surfaces.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Gray \/ No Indicator","offer_id":52270626373813,"sku":"QBP209810-V1","price":23.14,"currency_code":"USD","in_stock":true},{"title":"Ivory \/ No Indicator","offer_id":52270626406581,"sku":"QBP209810-V2","price":23.14,"currency_code":"USD","in_stock":true},{"title":"Gray \/ With Indicator","offer_id":52270626439349,"sku":"QBP209810-V3","price":26.84,"currency_code":"USD","in_stock":true},{"title":"Ivory \/ With Indicator","offer_id":52270626472117,"sku":"QBP209810-V4","price":29.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301736_qbp209810.jpg?v=1771549781","url":"https:\/\/www.qualityboatparts.com\/products\/qbp209810","provider":"Quality Boat Parts","version":"1.0","type":"link"}