{"product_id":"qbp206542","title":"Lumitec CapriLT Flush Mount LED Flood Light, White Light, 1000 Lumens, 10-30V DC, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec CapriLT is a flush-mount LED flood light built for deck and spreader use on 12V or 24V DC systems (10-30 VDC). It puts out 1000 lumens of cool white light (5000K) and carries an IP67 rating for wet installations and washdowns.\u003c\/p\u003e\u003cp\u003eThis is a low-profile, rectangular fixture that sits clean in a hardtop, cockpit coaming, or overhead panel. The face measures 4.94 in by 1.75 in, with a 3.87 in by 1.25 in cutout, so it is a good fit when you want a finished look without a bulky housing on the surface.\u003c\/p\u003e\u003cp\u003eIt draws 1.3A at 12V (about 600mA at 24V). The housing is powder-coated die-cast aluminum, and the light includes over-temperature protection for real-world heat in enclosed spaces.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush-mount footprint: 4.94 in x 1.75 in face with a 3.87 in x 1.25 in cutout\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for both 12V and 24V DC electrical systems\u003c\/li\u003e\n\u003cli\u003e1000-lumen cool white output (5000K) for working light on deck, cockpit, or under a hardtop\u003c\/li\u003e\n\u003cli\u003eIP67-rated sealing for rain, spray, and routine washdowns\u003c\/li\u003e\n\u003cli\u003ePowder-coated die-cast aluminum housing for long-term use in salt and sun\u003c\/li\u003e\n\u003cli\u003eCompatible with most PWM LED dimmers for brightness control from a standard dimmer circuit\u003c\/li\u003e\n\u003cli\u003eNot Poco System compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light is offered in multiple finish options while keeping the same light output and electrical ratings.\u003c\/p\u003e\u003cp\u003eThe only difference between variants is the housing finish, which changes how the fixture blends into the mounting surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e101289: Finish Black. A darker bezel that blends well with black powder-coated tops, dark canvas, or tinted enclosures.\u003c\/li\u003e\n\u003cli\u003e101288: Finish White. A lighter bezel that matches white gelcoat, headliners, and bright hardtop interiors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the cutout and confirm you have room behind the mounting surface before drilling. Allow up to about 1.57 in of depth for the fixture body and wiring, and keep at least 1 in of clearance around the back of the light so heat can dissipate.\u003c\/p\u003e\u003cp\u003eProtect the circuit with an appropriately sized fuse and size the fuse for the number of lights on that run. Typical mounting uses two #6 self-tapping screws after the cutout is made and the pilot holes are drilled.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire the light to a DC lighting circuit within the 10-30 VDC range. Current draw is 1.3A at 12V and about 600mA at 24V, which helps when you are planning breaker and wire sizing for multiple fixtures.\u003c\/p\u003e\u003cp\u003eIf the circuit uses a PWM LED dimmer, the light can be dimmed from that control. If your boat uses a digital lighting system, note that this model is not Poco System compatible.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis form factor works well where you want a clean flush install and a wide flood pattern for deck tasks. It is a practical match for boats that need a fixed cool white work light on a hardtop, in the cockpit, or as a spreader light without adding a surface-mount fixture that can snag lines or canvas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the face after saltwater runs and wipe the lens with mild soap and water. Avoid abrasive pads and harsh solvents that can haze the lens or damage the finish.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Black","offer_id":52270626242741,"sku":"QBP206542-V1","price":141.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":52270626275509,"sku":"QBP206542-V2","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301694_qbp206542.png?v=1771549753","url":"https:\/\/www.qualityboatparts.com\/products\/qbp206542","provider":"Quality Boat Parts","version":"1.0","type":"link"}