{"product_id":"qbp200445","title":"Hella Marine NaviLED Compact Deck Mount Sidelight Pair, 2NM, Multivolt 9-32V, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Hella Marine NaviLED Compact is a 2 nautical mile LED port and starboard navigation light pair for boats and yachts. It runs on 9 to 33V DC, so it suits both 12V and 24V systems, and the pair draws under 2W combined for low battery impact during night running.\u003c\/p\u003e\u003cp\u003eEach light is fully sealed (IP67-rated) and built to handle washdowns, salt exposure, and vibration. The lens is UV resistant acrylic with impact resistance, and the shroud is made for knocks from gear and lines.\u003c\/p\u003e\u003cp\u003eThese lights come pre-wired with 120mm of marine cable per lamp for a clean install in tight spaces on the bow, pulpit, or topsides. With no filaments, there is no bulb maintenance and nothing to break from shock.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePort and starboard pair with a 2 nautical mile visible range\u003c\/li\u003e\n\u003cli\u003eMultivolt input for 9 to 33V DC systems\u003c\/li\u003e\n\u003cli\u003eUnder 2W combined power draw for the pair\u003c\/li\u003e\n\u003cli\u003eIP67-rated, fully sealed housing for wet installs and washdowns\u003c\/li\u003e\n\u003cli\u003eLED light engine with no filaments for vibration resistance and low maintenance\u003c\/li\u003e\n\u003cli\u003ePre-wired 120mm marine cable on each lamp for faster wiring runs\u003c\/li\u003e\n\u003cli\u003eElectronics protected against voltage spikes up to +500V and reverse polarity down to -700V\u003c\/li\u003e\n\u003cli\u003eApproved to IMO COLREG 72, USCG, ABYC A-16, RINA, and Maritime NZ requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis light set is offered in multiple configurations so you can match the housing color and lens style to your installation.\u003c\/p\u003e\u003cp\u003eAcross the range, the differences are the housing color (black or white) and whether the lens is coloured or clear.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e980520801: Black housing with coloured lens. The coloured lens option gives the classic red and green lens appearance at the bow.\u003c\/li\u003e\n\u003cli\u003e980520811: White housing with coloured lens. White blends into many deck and rail mounts while keeping the traditional coloured lens look.\u003c\/li\u003e\n\u003cli\u003e980520901: Black housing with clear lens. A clear lens keeps a cleaner look on the fitting when the lights are off while still serving port and starboard functions.\u003c\/li\u003e\n\u003cli\u003e980520911: White housing with clear lens. This combination is often used where you want the light body to disappear against white gelcoat and keep a clear lens appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the port light on the port side and the starboard light on the starboard side where the lenses have a clear view and are not shadowed by the pulpit, anchor gear, or a headsail. Keep the mounting surface flat so the housings sit square, and seal any fastener holes to protect the core and keep water out of the deck.\u003c\/p\u003e\u003cp\u003eThe short pre-wired leads are convenient for neat installs, but most boats will join into a junction point or extend wiring back to the navigation light circuit. Route the cable away from sharp edges and areas where it can be crushed by hatches or lockers.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThese lights are suitable for 9 to 33V DC, which covers typical 12V and 24V onboard systems and helps during low battery conditions. Connect them to a properly fused navigation-light circuit and verify polarity and switching at the helm before finalizing cable runs. Built-in protection helps with common onboard electrical events, but clean connections and dry splices still matter for long-term reliability.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eThe housings are sealed for life, so routine care is mainly a fresh-water rinse after salt use and a quick check that the lens faces remain unobstructed. Clean the lens with mild soap and water and avoid abrasive pads that can haze acrylic over time.\u003c\/p\u003e","brand":"Hella Marine","offers":[{"title":"Black \/ Coloured","offer_id":52269773488309,"sku":"QBP200445-V1","price":246.4,"currency_code":"USD","in_stock":true},{"title":"White \/ Coloured","offer_id":52269773521077,"sku":"QBP200445-V2","price":239.13,"currency_code":"USD","in_stock":true},{"title":"Black \/ Clear","offer_id":52269773553845,"sku":"QBP200445-V3","price":239.13,"currency_code":"USD","in_stock":true},{"title":"White \/ Clear","offer_id":52269773586613,"sku":"QBP200445-V4","price":239.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301356_qbp200445.jpg?v=1771545680","url":"https:\/\/www.qualityboatparts.com\/products\/qbp200445","provider":"Quality Boat Parts","version":"1.0","type":"link"}