{"product_id":"qbp196979","title":"MotorGuide Tour Pro Bow Mount Trolling Motor, Pinpoint GPS, 82 lb Thrust, 24V, 45in Shaft, Cable Steer, Foot Control, Freshwater","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe MotorGuide 941900020 is a 24 V bow-mount trolling motor with 82 lb peak thrust, a 45 in shaft, cable-steer foot control, and Pinpoint GPS for holding position and managing heading while you fish.\u003c\/p\u003e\u003cp\u003eIt is a freshwater setup that keeps the instant feel of cable steering while adding GPS modes like Anchor, Jog, Heading Lock, and Cruise Control. Steering range goes past 180 degrees, so backing down is handled by rotating the lower unit rather than switching the motor into reverse.\u003c\/p\u003e\u003cp\u003eThis is a good match for anglers who live on the front deck and want fast steering response, then want to lock the boat on a spot without dropping an anchor.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e82 lb peak thrust on a 24 V system with a 45 in (114.3 cm) shaft length\u003c\/li\u003e\n\u003cli\u003eCable-steer foot pedal control with a metal upper pad and grip tape\u003c\/li\u003e\n\u003cli\u003ePinpoint GPS modes: Anchor, Jog, Heading Lock, and Cruise Control\u003c\/li\u003e\n\u003cli\u003eDigital variable speed control with 20 speed levels\u003c\/li\u003e\n\u003cli\u003eWireless GPS control included, plus an LED dashboard for power, battery, and GPS status\u003c\/li\u003e\n\u003cli\u003e360 degree breakaway mount with integrated Bounce Buster support\u003c\/li\u003e\n\u003cli\u003eIntegrated cable routing to keep rigging tighter at the bow\u003c\/li\u003e\n\u003cli\u003eZero-G lift assist with Bulldog latches and a gas spring to ease stow and deploy\u003c\/li\u003e\n\u003cli\u003eTwo blade Katana propeller\u003c\/li\u003e\n\u003cli\u003eTwo-piece shaft with a stainless steel outer column and a composite inner shaft\u003c\/li\u003e\n\u003cli\u003eCompatible with lithium-ion trolling batteries when supplying stable 24 V power\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSteering assembly\u003c\/li\u003e\n\u003cli\u003eMount\u003c\/li\u003e\n\u003cli\u003eBounce buster assembly\u003c\/li\u003e\n\u003cli\u003eGas spring\u003c\/li\u003e\n\u003cli\u003ePinpoint GPS remote\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n\u003cli\u003eTie-down strap\u003c\/li\u003e\n\u003cli\u003eKatana propeller with prop pin, washer, and nut\u003c\/li\u003e\n\u003cli\u003eMounting hardware (mounting screws, washers, rubber spacers, nylon lock nuts)\u003c\/li\u003e\n\u003cli\u003eCable routing ties and clips with mounting screws\u003c\/li\u003e\n\u003cli\u003eTorx bits (T20 and T40), plus Allen screws and plastic retaining washers\u003c\/li\u003e\n\u003cli\u003eSelf-tapping screw\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis model is rated for freshwater use and mounts on the bow. The 45 in shaft length is the key fit point, so make sure it keeps the prop submerged in your usual chop while still clearing the bow when stowed.\u003c\/p\u003e\u003cp\u003eCable steering works best when the foot pedal is placed where you can stand and work it naturally, with enough open space for the pedal to travel and return to neutral without snagging gear.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePlan on a dedicated 24 V trolling-motor battery bank using 12 V deep-cycle marine batteries wired for 24 V. A manual-reset circuit breaker should be installed on the positive lead within 6 ft (1.8 m) of the batteries.\u003c\/p\u003e\u003cp\u003eThe included battery leads are 10-gauge. If your batteries are farther away, use heavier cable rather than extending the stock leads beyond the recommended total run.\u003c\/p\u003e\u003cp\u003ePinpoint GPS can tie into an NMEA 2000 backbone for chartplotter control and motor status. For cleaner sonar performance, power sensitive electronics from your starting or accessory battery instead of the trolling-motor bank.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDry-fit the mount location before drilling so the shaft can deploy without hitting the rub rail, bow light, or trailer hardware. After mounting, route power and control cabling so the deck stays clear and the motor can steer freely through its full range.\u003c\/p\u003e\u003cp\u003eGPS-guided modes rely on unobstructed steering. Before using Anchor or Heading Lock, confirm the pedal area is clear and the motor can rotate without binding.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e941900020\u003c\/span\u003e","brand":"MotorGuide","offers":[{"title":"Default Title","offer_id":53721536233653,"sku":"QBP196979","price":4907.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1280676_qbp196979.webp?v=1794117001","url":"https:\/\/www.qualityboatparts.com\/products\/qbp196979","provider":"Quality Boat Parts","version":"1.0","type":"link"}