{"product_id":"qbp195352","title":"Victron Energy RJ45 UTP Cable, 5m, for VE.Bus and VE.Can","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy ASS030065001 is a 5 m RJ45 UTP cable for Victron communication links on board. It is used to connect compatible Victron controls, interfaces, VE.Bus devices, and GX system devices where an RJ45-style data cable is required.\u003c\/p\u003e\u003cp\u003eThis cable is a practical length for routing between an inverter or charger area and a nearby control panel, MK3-USB interface, Digital Multi Control, or GX device. On a boat, that often means running the cable from an electrical locker, battery compartment, or equipment panel to a helm, nav station, or monitoring location while keeping the installation tidy.\u003c\/p\u003e\u003cp\u003eIt is intended for communication between compatible Victron devices, not for AC wiring, DC battery cabling, or NMEA 2000 Micro-C backbone connections. Before installation, match the cable length to the route and confirm that the equipment ports call for an RJ45 UTP connection.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e5 m RJ45 UTP cable for Victron VE.Bus and compatible Victron data connections.\u003c\/li\u003e\n\u003cli\u003eUseful for linking Victron controls, interfaces, multiple VE.Bus devices, and GX devices with RJ45 communication ports.\u003c\/li\u003e\n\u003cli\u003eGood fit for marine electrical layouts where the inverter, charger, battery system, or monitoring display is mounted away from the main control point.\u003c\/li\u003e\n\u003cli\u003eHelps keep communication wiring separate from high-current DC cables and AC wiring during a clean boat installation.\u003c\/li\u003e\n\u003cli\u003eFactory-terminated cable avoids the extra work and uncertainty of crimping RJ45 plugs during refits or equipment upgrades.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eRoute the cable where it will not be pinched by panels, pulled tight at hinges, or exposed to sharp edges behind cabinetry. Leave a service loop near the equipment so the connected device can be moved for inspection without straining the RJ45 plug.\u003c\/p\u003e\u003cp\u003eFor best practice on board, keep data cables separated from battery cables, inverter AC wiring, and other high-current runs where possible. Use clips, loom, or cable ties to support the run, but do not overtighten around the jacket.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is suited to Victron equipment that specifies RJ45 UTP cabling for communication, including common VE.Bus and GX device layouts. It is especially relevant for installations built around Victron inverter chargers, remote controls, configuration interfaces, and monitoring devices with RJ45 communication sockets.\u003c\/p\u003e\u003cp\u003eThe 5 m length works well when the connected devices are in the same electrical space or in nearby compartments. Measure the real cable route, including bends and service loops, rather than using straight-line distance between devices.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis cable is a good match for boat owners, marine electricians, and refit yards adding or servicing Victron power system communication. It is useful in battery upgrades, inverter charger installs, GX monitoring projects, and helm or nav-station control layouts where a clean data connection is needed between Victron components.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52581875679413,"sku":"QBP195352","price":16.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332387_qbp195352.jpg?v=1780200998","url":"https:\/\/www.qualityboatparts.com\/products\/qbp195352","provider":"Quality Boat Parts","version":"1.0","type":"link"}