{"product_id":"qbp186144","title":"Vimar Eikon 2-Module Mounting Frame, Without Screws, For 60 mm Fixing Centres or 56x56 mm Box, 71 mm Distance Between Centres","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM21603 is a 2-module Eikon mounting frame that holds modular switching devices neatly in a flush installation, so your finished plate sits straight and the modules stay supported when the boat is underway.\u003c\/p\u003e\u003cp\u003eIt suits setups built around 60 mm fixing centres or a 56 x 56 mm mounting box, and it is modular with a 71 mm distance between centres for lining up multiple frames in series.\u003c\/p\u003e\u003cp\u003eThe frame is made from thermoplastic with an untreated surface, and the honeycomb structure adds stiffness where it matters behind the plate.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module support for Vimar Eikon modular devices, with the inserts mounted from the front.\u003c\/li\u003e\n\u003cli\u003eFlush-mount support that can be installed in horizontal or vertical direction to match the panel layout.\u003c\/li\u003e\n\u003cli\u003eFits 60 mm fixing centres or a 56 x 56 mm mounting box, with 71 mm centre spacing for ganged installations.\u003c\/li\u003e\n\u003cli\u003eCorner slots for panel fixing and central slots that help you level the support before final tightening.\u003c\/li\u003e\n\u003cli\u003eHooking teeth make it easier to link frames in series for multi-position switch banks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this frame when your installation is based on Vimar Eikon supports and you need a 2-module position for switches, outlets, or other Eikon inserts. Before ordering, confirm the box type and fixing-centre spacing in the mounting location, especially on refits where the existing box standard may vary.\u003c\/p\u003e\u003cp\u003eThis is the support behind the cover plate, not a complete enclosure. Any sealing against spray or washdown depends on the box, plate, and gasket approach used in your assembly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSecure the frame to the box or panel using the slotted fixing points, then use the central slots to keep it level so the plate sits flat. After the support is fixed, fit the Eikon modules from the front and finish with the matching cover plate.\u003c\/p\u003e\u003cp\u003eFor a longer switch run at the helm, nav station, or a utility panel, the 71 mm modular spacing helps keep multiple frames aligned so the final row looks even.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis frame is a good match when you are standardizing on Vimar Eikon hardware for control points around the boat, such as a compact two-module position in the cabin, a small control group at the nav station, or an accessory panel in the cockpit.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIn vibration-prone areas, it is worth re-checking fasteners after the first few trips. If the surrounding panel is exposed to salt spray, rinse the area during routine cleaning and keep the protection focus on the cover plate and box assembly.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268855263413,"sku":"QBP186144","price":3.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298016_qbp186144.jpg?v=1771540466","url":"https:\/\/www.qualityboatparts.com\/products\/qbp186144","provider":"Quality Boat Parts","version":"1.0","type":"link"}