{"product_id":"qbp171861","title":"Garmin LiveScope GLS 10 Sonar Module, For LVS32 Transducer, 10-32V, IPX7","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-12954-00 is a GLS 10 sonar module that links a LiveScope transducer to a compatible Garmin chartplotter over the Garmin Marine Network for live, real-time scanning sonar views. It runs on 10 to 32 Vdc (12V or 24V systems) and draws about 21 W in normal use (up to 58 W), with a compact black-box footprint of 245 x 149 x 65 mm (9.7 x 5.9 x 2.6 in.).\u003c\/p\u003e\u003cp\u003eThis module is the hub for LiveScope setups, taking the transducer signal and putting it on the network so it can be displayed and shared on connected Garmin chartplotters. It works with compatible LiveScope transducers including LVS32, LVS34, and LiveScope XR LVS62 (transducer sold separately).\u003c\/p\u003e\u003cp\u003eIt is a good match for boats that already have Garmin Marine Network on board and want to add LiveScope, replace a GLS 10 module, or run LiveScope views on more than one networked display.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10 to 32 Vdc input for 12V and 24V electrical systems.\u003c\/li\u003e\n\u003cli\u003ePower draw rated at 21 W typical and 58 W max for planning wiring and load.\u003c\/li\u003e\n\u003cli\u003e7.5 A fast-acting fuse integrated on the power lead.\u003c\/li\u003e\n\u003cli\u003eGarmin Marine Network data output with 1 network port (small connector).\u003c\/li\u003e\n\u003cli\u003eCompatible with LiveScope transducers including LVS32, LVS34, and LiveScope XR LVS62 (transducer not included).\u003c\/li\u003e\n\u003cli\u003e245 x 149 x 65 mm housing and 1.96 kg (4.33 lb) weight for mounting planning.\u003c\/li\u003e\n\u003cli\u003eCompass-safe distance listed at 178 mm (7 in.) to help avoid interference near compasses and sensors.\u003c\/li\u003e\n\u003cli\u003eStatus LED supports quick checks for connected, waiting to connect, updating, and fault conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGLS 10 sonar module\u003c\/li\u003e\n\u003cli\u003ePower cable with in-line fuse\u003c\/li\u003e\n\u003cli\u003e2 m Garmin Marine Network cable (small connector)\u003c\/li\u003e\n\u003cli\u003eGarmin Marine Network adapter cable (small connector to large)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe GLS 10 connects to a compatible Garmin chartplotter through the Garmin Marine Network, so your display needs network support for LiveScope. If your boat already has a Garmin Marine Network backbone for radar or chart sharing, the module can be added as another network device so LiveScope views are available on connected stations.\u003c\/p\u003e\u003cp\u003ePlan the mounting location with the compass-safe distance in mind, and leave room at the connectors for a clean cable bend radius and service access.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the module in a location where it will not be submerged, with the status LEDs visible and the cables able to reach without strain. On most boats, that means inside the console, under a helm seat, or in a dry electronics compartment above the bilge line.\u003c\/p\u003e\u003cp\u003eRoute the transducer and network cables away from high-current wiring when possible, and support the run so vibration and steering movement do not work-harden the cable at the connectors.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003ePower the module from a clean 12V or 24V feed, keeping voltage drop low under load. The supplied power lead is 9 ft (2.7 m); when extending, use 10 AWG up to 15 ft (4.6 m) of extension, 8 AWG up to 23 ft (7 m), or 6 AWG up to 36 ft (11 m).\u003c\/p\u003e\u003cp\u003eOn the network side, connect the module to your Garmin Marine Network using the included cable and the included adapter cable when your chartplotter uses the larger network connector style.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that the power and network connectors stay fully seated and dry, especially after heavy washdowns or trailering. If the boat lives in a salt environment, a quick wipe-down around the module and cable runs helps keep salt buildup from migrating into connectors over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269166559413,"sku":"QBP171861","price":599.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299308_qbp171861.jpg?v=1771542316","url":"https:\/\/www.qualityboatparts.com\/products\/qbp171861","provider":"Quality Boat Parts","version":"1.0","type":"link"}