{"product_id":"qbp169591","title":"Attwood Marine Turbo 3000 Series Water-Resistant In-Line Bilge Blower, 3 in, 12V, 145 CFM, White Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 1733-4 is a 12V in-line bilge blower for 3 inch ventilation hose, used to move air through engine compartments, bilges, galleys, and heads where moisture is part of the environment.\u003c\/p\u003e\u003cp\u003eThis is the water-resistant version in white. It is rated at 145 CFM open flow at 13.6 V, with 100 CFM in a typical installed system, and it draws about 3.1 amps with a 4-amp fuse. The blower is ignition protected and mounts in-line with built-in feet, so it can be fitted vertically or horizontally when space around the duct run is limited.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 3 inch I.D. ventilation hose for common bilge blower replacement work\u003c\/li\u003e\n\u003cli\u003e12V DC operation with 145 CFM open flow and 100 CFM in-system airflow\u003c\/li\u003e\n\u003cli\u003eWater-resistant construction with a motor cap that seals the wires and motor\u003c\/li\u003e\n\u003cli\u003eIgnition-protected housing for ventilated spaces that can collect fuel vapors\u003c\/li\u003e\n\u003cli\u003eBuilt-in mounting feet support vertical or horizontal installation\u003c\/li\u003e\n\u003cli\u003eNickel-plated motor can helps resist corrosion in damp marine spaces\u003c\/li\u003e\n\u003cli\u003eTabs at the intake and exhaust help keep hose and clamp seated\u003c\/li\u003e\n\u003cli\u003e16-gauge tinned copper wire leads and two tie straps are included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis blower installs in a 3 inch duct run and mounts with #10 fasteners. The in-line body works well in transom, under-deck, and other confined spaces where hose routing leaves little room around the blower itself.\u003c\/p\u003e\u003cp\u003eIt is a sensible match for owners replacing an older 3 inch blower on a 12V system or adding forced ventilation to enclosed spaces on board. Water-resistant construction suits damp locations, but this model should not be installed where it will sit in direct contact with water or other liquids.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eFor buyers checking system fit, this blower is for 12V DC wiring and a 3 inch ventilation layout. The published airflow figure is measured at 13.6 V, so real output on board will depend on hose length, bends, vents, and other restrictions in the run.\u003c\/p\u003e\u003cp\u003eThat makes it a good fit for boats that already use 3 inch ducting and need a like-for-like replacement without changing hose size, mounting direction, or basic electrical setup.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52023458431157,"sku":"QBP169591","price":39.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329316_qbp169591.jpg?v=1780191813","url":"https:\/\/www.qualityboatparts.com\/products\/qbp169591","provider":"Quality Boat Parts","version":"1.0","type":"link"}