{"product_id":"qbp165023","title":"Lumitec Mirage Glass Flush Mount LED Down Light, White\/Red\/Green, 10-30V, IP67, 6W, Polished Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumitec 101236 is a flush-mount LED downlight with a glass lens and white\/red\/green output for overhead lighting on board. It runs on 10-30 VDC (12V or 24V systems), draws 6 W, and produces up to 380 lumens on white. The light is sealed to IP67 for wet areas and washdowns.\u003c\/p\u003e\u003cp\u003eThe face measures 3.25 in (8.25 cm) across, with a 2.00 in mounting hole requirement. Behind the panel, plan for about 1.11 in (2.81 cm) of depth and a body diameter up to 3.73 in (9.47 cm) to clear the spring clips and wiring.\u003c\/p\u003e\u003cp\u003eColor changes are handled with timed on\/off toggles from a standard switch, and the light is PLI enabled for integration with compatible Lumitec control systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWhite\/red\/green output in one fixture for task lighting and night-friendly modes\u003c\/li\u003e\n\u003cli\u003e10-30 VDC input for 12V and 24V DC systems\u003c\/li\u003e\n\u003cli\u003e6 W draw with up to 380 lumens on white\u003c\/li\u003e\n\u003cli\u003eIP67 sealed for damp spaces and washdowns (not for permanent underwater mounting)\u003c\/li\u003e\n\u003cli\u003e3.25 in face with a 2.00 in cutout; about 1.11 in depth behind the panel\u003c\/li\u003e\n\u003cli\u003eSpring-clip mounting for quick installs in headliners, hardtops, and consoles\u003c\/li\u003e\n\u003cli\u003ePolarity-sensitive two-wire hookup: black to negative, white or red to positive\u003c\/li\u003e\n\u003cli\u003eTimed Toggled Protocol (TTP) control from a standard on\/off switch for mode changes\u003c\/li\u003e\n\u003cli\u003ePLI enabled for syncing and control in compatible Lumitec systems\u003c\/li\u003e\n\u003cli\u003ePlan circuit protection for up to 500 mA at 12 VDC (250 mA at 24 VDC) per light\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eCut a clean 2.00 in hole, confirm the backside has clearance for the spring clips, then pull the springs back and press the light into place until it seats. Leave enough slack in the wiring so the fixture can be pulled down later for service without yanking on connections.\u003c\/p\u003e\u003cp\u003eIf you are installing into a cored panel, seal the exposed core around the cutout to keep moisture from wicking into the laminate. On thin headliners, check that the spring clips have solid material to bite into.\u003c\/p\u003e\u003ch6\u003eElectrical and control\u003c\/h6\u003e\u003cp\u003eWire the light directly to your DC distribution with an appropriately sized fuse or breaker, and size the protection based on the number of lights on the circuit. The unit is polarity sensitive, so verify positive and negative before powering up.\u003c\/p\u003e\u003cp\u003eFor control, the light can be switched with a simple SPST toggle or rocker. Quick off\/on cycles step through the available output modes, while an off period of a few seconds returns the light to its default state.\u003c\/p\u003e\u003ch6\u003ePlacement and use on board\u003c\/h6\u003e\u003cp\u003eThis style of downlight is a common fit for cabins, heads, passageways, cockpits, T-tops, and helm overhangs where you want a clean overhead finish. Red and green modes are handy when you want lower visual impact at night while still seeing what you are doing on deck.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt spray when practical and wipe the lens with a soft cloth. Avoid abrasive cleaners that can haze the lens or mark the finish, and periodically check wiring connections if the fixture lives in a high-vibration area.\u003c\/p\u003e","brand":"Lumitec","offers":[{"title":"Default Title","offer_id":52268847890613,"sku":"QBP165023","price":136.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297910_qbp165023.jpg?v=1771540438","url":"https:\/\/www.qualityboatparts.com\/products\/qbp165023","provider":"Quality Boat Parts","version":"1.0","type":"link"}