{"product_id":"qbp157196","title":"Lumishore ECLIPSE SNL100 Neon Flex Strip Light, Blue Light, 1m, 12V, IP68","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04489-00 is a 1 m blue Neon Flex strip light for adding a continuous accent line in cockpits, cabins, hardtops, and other onboard spaces on a 12V DC system.\u003c\/p\u003e\u003cp\u003eIt runs on 12V DC only and is intended for 10 to 15V DC supplies, with IP68 protection for outdoor or indoor mounting in areas that get spray or washdowns. It can be installed in wet locations, but it is not meant to live permanently underwater.\u003c\/p\u003e\u003cp\u003eFor clean routing around corners, keep to a 120 mm minimum bend radius and bend on its side without twisting. If you need a shorter run, cut only at the marked cut points and reseal the end before mounting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eBlue Neon Flex strip with 1 m ordered length for a continuous accent line\u003c\/li\u003e\n\u003cli\u003e12V DC boats only, with a 10 to 15V DC operating range\u003c\/li\u003e\n\u003cli\u003eIP68 protection for outdoor or indoor mounting in areas that get spray or washdowns\u003c\/li\u003e\n\u003cli\u003e120 mm minimum bend radius, with side bending only and no twisting\u003c\/li\u003e\n\u003cli\u003eTypical power use is about 5 W per meter for load planning\u003c\/li\u003e\n\u003cli\u003eCut-to-length support at marked cut points, with resealing before installation\u003c\/li\u003e\n\u003cli\u003eMounts with stainless steel clips, with clip spacing recommended about every 300 mm and closer around tight bends\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNeon Flex light strip (1 m) with lead cable\u003c\/li\u003e\n\u003cli\u003eStainless steel mounting clips\u003c\/li\u003e\n\u003cli\u003eEnd caps for blanking and cable exit\u003c\/li\u003e\n\u003cli\u003eSealing kit for cut ends, including silicone adhesive and sponge cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the run first, then isolate the boat battery before you start wiring. Lay the strip out straight and handle it along its length so it does not kink or twist. Even though the material is UV resistant, avoid mounting it where it will sit in strong direct sunlight.\u003c\/p\u003e\u003cp\u003eFix the clips with suitable screws, then press the strip into the clips until it clicks. A clip every 300 mm helps keep the line straight, and adding extra clips around corners helps it stay seated without lifting.\u003c\/p\u003e\u003cp\u003eIf you cut the strip, seal the new end before mounting. Allow the sealant to cure undisturbed for 24 hours so the strip stays watertight after trimming.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire it as a fused 12V DC accessory. The red lead connects to a switched 12V feed, and the black lead goes to ground. Keep the supply within 10 to 15V DC and do not connect it to AC power.\u003c\/p\u003e\u003ch6\u003ePlacement on board\u003c\/h6\u003e\u003cp\u003eThis style of strip works well for indirect lighting under gunwales, along toe kicks, under seating, or tucked behind trim where you want the glow without seeing individual points. Blue accent lighting is commonly used for night running and cockpit work when you want light that stays low and controlled.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eClean with a damp soft cloth or a soft bristled brush. Avoid abrasive pads, harsh cleaners, and pressure washing, since they can damage the outer jacket and seals over time.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":52256233062581,"sku":"QBP157196","price":58.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284979_qbp157196.jpg?v=1771286804","url":"https:\/\/www.qualityboatparts.com\/products\/qbp157196","provider":"Quality Boat Parts","version":"1.0","type":"link"}