{"product_id":"qbp155964","title":"Lumishore ECLIPSE DL55 Blue LED Downlight, IP67, 10-15V, White Finish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04471-00 is a recessed, single-color blue LED downlight with a white finish, sized for a 50.8 mm (2\") cutout and sealed to an IP67 rating for wet overhead areas on board.\u003c\/p\u003e\u003cp\u003eIt runs on 12V DC only (10 to 15V) and draws up to 0.4A, which makes it easy to add to an existing 12V lighting circuit without guessing at load.\u003c\/p\u003e\u003cp\u003eThe face profile is slim at about 3.5 mm, and the shallow 21 mm (0.83\") installation depth helps when you are working in headliners, hardtops, or overhead panels where space is tight.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSingle-color blue output using 2 x 3W LEDs for night lighting and low-glare accent use\u003c\/li\u003e\n\u003cli\u003e12V DC only input range (10 to 15V) with up to 0.4A current draw for straightforward circuit planning\u003c\/li\u003e\n\u003cli\u003eIP67 sealed front for damp locations and washdown exposure\u003c\/li\u003e\n\u003cli\u003eRecessed footprint: 50.8 mm (2\") mounting hole with a 64.0 mm (2.519\") bezel\u003c\/li\u003e\n\u003cli\u003eShallow 21 mm (0.83\") depth and low 3.5 mm face profile for tight overhead installs\u003c\/li\u003e\n\u003cli\u003eStainless steel spring clips hold the light in place without visible fasteners\u003c\/li\u003e\n\u003cli\u003eSimple 2-wire hookup for basic switching and compatible control through an ECLIPSE Command Center\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eCut a clean 50.8 mm (2\") hole, confirm you have at least 21 mm (0.83\") of clearance behind the panel, then push the light into place so the stainless spring clips can grab the backside of the mounting surface. The 64.0 mm bezel covers the cutout edge for a finished look.\u003c\/p\u003e\u003cp\u003eWire it with a standard 2-wire connection to a switched 12V DC lighting circuit. Keep it on a regulated 12V feed since the operating range is 10 to 15V DC.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis light is intended for 12V DC systems only. If your boat is primarily 24V, it should be fed from a proper 12V supply rather than wired directly to a 24V circuit.\u003c\/p\u003e\u003cp\u003eThe IP67 sealed face suits overhead mounting in areas that see spray, humidity, and vibration, such as hardtops, cockpit overheads, exterior soffits, and cabin headliners.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eBlue downlighting is commonly used for night running and dockside work where you want light that stays subdued and helps preserve night vision. It also works well as accent lighting over steps, seating, and cockpit work areas when you want to keep glare off windows and electronics.\u003c\/p\u003e\u003cp\u003eThis is a strong match for owners who need a small recessed downlight with a sealed face and a quick clip-in install for overhead panels.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":52256232898741,"sku":"QBP155964","price":120.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284973_qbp155964.jpg?v=1771286799","url":"https:\/\/www.qualityboatparts.com\/products\/qbp155964","provider":"Quality Boat Parts","version":"1.0","type":"link"}