{"product_id":"qbp151078","title":"Garmin Motorcycle Power Cable, For zumo 400\/450\/500\/550, 12V, Hardwire, Bare Wire Ends","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-10861-00 is a hardwire motorcycle power cable for compatible Garmin zumo units, built to keep the GPS powered from a 12 V DC supply instead of relying on internal battery runtime. It uses bare-wire leads for permanent wiring and is meant to be used with the zumo motorcycle mount (mount hardware sold separately).\u003c\/p\u003e\u003cp\u003eOn a boat, this style of cable is handy when you want a dedicated power feed at a helm, in a tender, or on a trailerable setup where the same zumo cradle gets used between the dock and the road. Because the leads are open-ended, you can terminate them to your vessel’s DC distribution the same way you would any other accessory circuit, keeping the connection secure and serviceable.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHardwire, bare-wire leads for direct connection to a 12 V DC circuit\u003c\/li\u003e\n\u003cli\u003eBuilt for use with the zumo motorcycle mount (mount bracket sold separately)\u003c\/li\u003e\n\u003cli\u003eCompatible with Garmin zumo 400, zumo 450, zumo 500, and zumo 550 units\u003c\/li\u003e\n\u003cli\u003eIncludes an audio jack for wired headset connection\u003c\/li\u003e\n\u003cli\u003eGood fit for permanent installations where you want the GPS powered whenever the circuit is on\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eHardwire motorcycle power cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan to wire the cable into a switched 12 V DC circuit so the GPS mount is not left energized when the boat is unattended. Terminate the bare leads with the right connectors for your panel or bus bar, and keep the connection points protected from spray and washdowns with sealed terminals and heat-shrink where appropriate.\u003c\/p\u003e\u003cp\u003eRoute the cable so it is supported and strain-relieved near the mount, then keep the run clear of sharp edges, moving steering components, and high-heat areas. If the installation is in an exposed cockpit, leave a drip loop and place any splices in a sheltered location above standing water.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is intended for the zumo motorcycle mounting setup used with the zumo 400, 450, 500, and 550. It is not a USB charger lead, and it is not meant to power devices that use different cradles or connectors.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boaters who already run a compatible zumo in a cradle and want a clean, hardwired power feed at the helm, on a small-console tender, or on a trailerable setup that sees both road and water use. It is also useful for keeping the GPS powered during long days when relying on battery alone is not practical.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect the wiring at the mount and at the power takeoff point for chafe, corrosion, or loose terminals. If the cable is installed where it can get wet, keep connectors dry when possible and re-seal any terminations if you see green copper or salt buildup.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003e010-10861-00\u003c\/span\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":53765235802293,"sku":"QBP151078","price":21.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/0694082_qbp151078_jpeg.jpg?v=1794606318","url":"https:\/\/www.qualityboatparts.com\/products\/qbp151078","provider":"Quality Boat Parts","version":"1.0","type":"link"}