{"product_id":"qbp148259","title":"Lumishore ECLIPSE SL100 RGB LED Strip Light, For ECLIPSE Command Center, 5m, 12V DC, IP68, 60 RGB LEDs\/m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04539-00 is a 5 m ECLIPSE SL100 RGB LED strip light for adding indirect accent lighting in cabins, cockpits, and other areas where you want light without a visible fixture.\u003c\/p\u003e\u003cp\u003eIt runs on 12 V DC systems (10 to 15 V) and uses a fully encapsulated, potted strip with an IP68 rating, so it can live behind panels, under gunwales, and in other spots that see spray and washdowns. The strip has 60 LEDs per meter in a clear housing and a slim 10.8 mm x 5.2 mm cross section, which helps when routing it through tight liner gaps and around trim.\u003c\/p\u003e\u003cp\u003eThe 5 m length can be cut to fit, and the cut end must be sealed after trimming. Color output is RGB, so a compatible controller is required when you want to change colors; power can still be switched on and off like any other 12 V accessory.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e5 m RGB LED strip in a clear housing that can be cut to length and sealed after trimming\u003c\/li\u003e\n\u003cli\u003e12 V DC input range: 10 to 15 V\u003c\/li\u003e\n\u003cli\u003eUp to 0.5 A per meter (6 W\/m) for straightforward circuit planning\u003c\/li\u003e\n\u003cli\u003eIP68 rated, fully encapsulated and potted strip for wet lockers and washdown areas\u003c\/li\u003e\n\u003cli\u003e60 LEDs per meter for even light along long runs\u003c\/li\u003e\n\u003cli\u003eSlim cross section: 10.8 mm x 5.2 mm\u003c\/li\u003e\n\u003cli\u003eSimple two-wire power connection; supports compatible ECLIPSE control hardware for RGB control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the run first, including where the strip will turn corners and where the power lead will land. Keep it away from sharp edges and moving hardware, and add strain relief anywhere the cable could get tugged by vibration or access panels.\u003c\/p\u003e\u003cp\u003eWhen cutting to length, make the cut clean and seal the cut end before final installation so water cannot wick into the strip. Test the section before closing up liners or headliners.\u003c\/p\u003e\u003ch6\u003eElectrical and control integration\u003c\/h6\u003e\u003cp\u003eWire it to a protected 12 V DC circuit within the 10 to 15 V input range. Power draw is up to 0.5 A per meter (6 W\/m), which is useful when sizing the feed, fuse, and wire gauge for longer runs.\u003c\/p\u003e\u003cp\u003eThis strip is not intended for dimming. For color changes and effects, pair it with compatible ECLIPSE control hardware.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon installs include under gunwales, under seating bases, behind ceiling panels, and along toe-kicks for low-glare courtesy lighting. It is a good match for refits where you want hidden lighting that handles spray and quick washdowns without relying on a bulky fixture.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off during routine washdowns and avoid strong solvents on the strip. Periodically check the sealed end and cable routing for chafe, especially in lockers and under seats where gear can shift underway.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":52256232505525,"sku":"QBP148259","price":195.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284959_qbp148259.webp?v=1771286789","url":"https:\/\/www.qualityboatparts.com\/products\/qbp148259","provider":"Quality Boat Parts","version":"1.0","type":"link"}