{"product_id":"qbp138453","title":"Lumishore Eclipse SL100 LED Strip Light, White Light, 2.5m, 12V, IP68","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04481-00 is a 2.5 m white LED strip light for adding indirect lighting on board. It runs on 12 V DC systems (10 to 15 V DC) and uses a simple 2-wire connection, which keeps wiring straightforward for refits and new builds.\u003c\/p\u003e\u003cp\u003eThe strip is fully encapsulated and potted with an IP68 rating, making it a solid choice for damp lockers, under-gunwale runs, steps, and other spots that see spray and washdowns once terminations are sealed properly. Power draw is up to 0.5 A per meter (6 W\/m), so a full 2.5 m length plans at up to about 1.25 A on a 12 V circuit.\u003c\/p\u003e\u003cp\u003eWith a slim cross section of about 10.8 mm x 5.2 mm, it tucks into channels and behind trim where you want the light to be seen but not the fixture.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2.5 m white LED strip for indirect lighting in cabins, cockpits, hardtops, lockers, and under-gunwale accents\u003c\/li\u003e\n\u003cli\u003e12 V DC operation (10 to 15 V DC) with a straightforward 2-wire hookup\u003c\/li\u003e\n\u003cli\u003eIP68-rated, fully encapsulated and potted construction for wet marine environments when installed with sealed ends and connections\u003c\/li\u003e\n\u003cli\u003eUp to 0.5 A per meter (6 W\/m) for practical load planning on existing lighting circuits\u003c\/li\u003e\n\u003cli\u003eLow-profile size around 10.8 mm x 5.2 mm for clean, hidden installs\u003c\/li\u003e\n\u003cli\u003eCut-and-seal format for trimming the length to suit the run and finishing the end neatly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eLay out the run first and confirm you have a clean path for both the strip and the supply wiring. Keep bends gentle, avoid hard corners, and protect the strip anywhere it could be pinched by panels or hardware.\u003c\/p\u003e\u003cp\u003eIf you cut the strip to length, finish the end with the correct sealing method so water cannot wick into the strip over time. Take a moment to plan where any splices or transitions will live so they stay accessible but out of direct spray.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis is a 12 V DC light strip with a 2-wire connection, so it can be tied into a dedicated lighting switch or an existing lighting circuit as long as the circuit capacity is appropriate. Use the per-meter current draw to size wiring and fuse protection for the total installed length, including any additional strips on the same circuit.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis strip works well for owners who want white accent light that stays out of sight, such as along toe-kicks, behind valances, under coamings, or inside storage compartments. It is also a practical option when you need an IP68-rated strip for areas that get damp during normal boating and washdowns.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue from exposed areas during routine washdowns and check any sealed ends and connections periodically. If the strip is installed in high-traffic spots, inspect for chafe and re-secure or protect the run anywhere vibration or movement could work it loose over time.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":52256230932661,"sku":"QBP138453","price":150.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284929_qbp138453.webp?v=1771286757","url":"https:\/\/www.qualityboatparts.com\/products\/qbp138453","provider":"Quality Boat Parts","version":"1.0","type":"link"}