{"product_id":"qbp136614","title":"Vimar Flush-Mount Hollow Wall Mounting Box, 4-Module, 50mm Deep, Light Blue, Glow Wire 850C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71704 is a 4-module flush-mount box for hollow walls that clamps into thin panels and supports up to four modular electrical fittings. The box body measures 133.8 mm x 72.5 mm with 50 mm internal depth, and the wall cutout is prepared with a 68 mm hole cutter.\u003c\/p\u003e\u003cp\u003eIt is made from halogen-free plastic with a glow-wire rating of 850 C and an IP00 protection rating, so it belongs behind a finished plate and in protected interior locations. Break-out feed-through openings are provided around the sides and rear, with retention knockouts shaped for conduit in 16 mm, 20 mm, or 25 mm sizes and a total of 14 possible inlets.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-module hollow-wall box for mounting up to four electrical fittings\u003c\/li\u003e\n\u003cli\u003eMetal fins clamp securely to walls with thickness from 1 to 38 mm\u003c\/li\u003e\n\u003cli\u003eOverall size 133.8 mm x 72.5 mm with 50 mm internal depth\u003c\/li\u003e\n\u003cli\u003e68 mm hole-cutter preparation with a hole-centring plate on the back to help line up the cutout\u003c\/li\u003e\n\u003cli\u003eBreak-out cable entries and rear inlet; retention knockouts for 16 mm, 20 mm, or 25 mm conduit; 14 inlets total\u003c\/li\u003e\n\u003cli\u003eMetal fixing lugs for device support screws\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body with glow-wire rating of 850 C; IP00 (non-sealed)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for hollow constructions such as plasterboard, wood, and laminate-type panels, which is common when fitting switches and sockets into interior liners, bulkheads, and furniture faces. Confirm your front-end hardware is built around Vimar 4-module frames and the matching cover plates for the finish you want.\u003c\/p\u003e\u003cp\u003eThe enclosure is not sealed and does not provide spray protection on its own, so it should be kept away from exposed cockpit and deck areas unless it sits inside a separate protected housing.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eCut the opening with a 68 mm hole saw, feed cables or conduit through the chosen break-outs, and slide the box into the panel. Tightening the clamps pulls the metal fins against the back of the wall to lock the box in place across a wide range of panel thicknesses.\u003c\/p\u003e\u003cp\u003eDevice mounting screws land on metal lugs inside the box. A matching 4-module flat cover is available for closing the opening during build-out (V71634).\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis box fits clean electrical refits where you are adding Vimar modular switches or outlets to cabins, salons, or helm-side interior panels and want a serviceable backbox with multiple entry points. It also helps when you are routing conduit behind liners and need a box that accepts 16 mm, 20 mm, or 25 mm conduit without forcing oversized openings.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268840779957,"sku":"QBP136614","price":7.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297875_qbp136614.jpg?v=1771540406","url":"https:\/\/www.qualityboatparts.com\/products\/qbp136614","provider":"Quality Boat Parts","version":"1.0","type":"link"}