{"product_id":"qbp132146","title":"Lumishore ECLIPSE DL55 LED Downlight, White Light 5000K, Black Finish, 10-15V DC, IP67, 2in Cutout","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04474-00 is a recessed ECLIPSE DL55 white LED downlight with a black finish, sized for clean overhead lighting in cabins, heads, cockpits, and under hardtops. Output is white at 5000 K, rated at 172 fixture lumens, and it runs on 12V DC systems only (10 to 15V DC).\u003c\/p\u003e\u003cp\u003eThe light is sealed to IP67 for wet areas and washdowns, but it is not meant to be permanently submerged. For fit planning, the bezel is 64.0 mm (2.519 in) with a 50.8 mm (2.0 in) cutout and 21.2 mm (0.834 in) depth behind the panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWhite output at 5000 K with 172 fixture lumens for general overhead lighting\u003c\/li\u003e\n\u003cli\u003e12V DC only (10 to 15V DC); max current draw 0.4A (typical current draw about 0.33A at 12V)\u003c\/li\u003e\n\u003cli\u003eIP67 sealed face for wet areas and washdowns; not intended for permanent submersion\u003c\/li\u003e\n\u003cli\u003eCutout and size: 50.8 mm (2.0 in) hole, 64.0 mm (2.519 in) bezel, 21.2 mm (0.834 in) depth\u003c\/li\u003e\n\u003cli\u003eAluminum body with a glass front, finished with E-coating and powder coating; black bezel to blend with dark headliners and hardtops\u003c\/li\u003e\n\u003cli\u003eInterior mounting uses stainless steel spring clips; adhesive mounting is supported for exterior installations and wet areas\u003c\/li\u003e\n\u003cli\u003eControl and dimming through a simple on\/off switch or an ECLIPSE Command Center; it is not intended to be wired to third-party lighting dimmers\u003c\/li\u003e\n\u003cli\u003eBuilt-in electrical protection including reverse polarity protection and ISO 8846 ignition protection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis downlight is for 12V boats only and should be fed from a stable 10 to 15V DC supply. On 24V vessels, it will need a proper 24V-to-12V conversion or a dedicated 12V lighting circuit before it can be installed.\u003c\/p\u003e\u003cp\u003ePlan the mounting location around the 2.0 in (50.8 mm) cutout and 21.2 mm depth, and keep the mounting surface flat rather than curved so the bezel seats evenly and stays sealed.\u003c\/p\u003e\u003ch6\u003eInstallation and wiring\u003c\/h6\u003e\u003cp\u003eElectrical hookup is a straightforward 2-wire run: connect the positive feed to red and ground to black, with a correctly sized fuse in the supply line. For multiple lights, use appropriate cable gauge to keep voltage drop under 3% at the last fixture in the run.\u003c\/p\u003e\u003cp\u003eFor switch control, the light can be dimmed by toggling the on\/off switch, with an off period of about two seconds returning the light to full output. When used with an ECLIPSE Command Center, follow the correct harness wiring and keep to a maximum of 16 lights on the output.\u003c\/p\u003e\u003ch6\u003eOn-board use notes\u003c\/h6\u003e\u003cp\u003eThe 5000 K white is a clean, neutral-cool tone that reads well for galley work, moving around at night, and general cockpit tasks. The black finish is a good match for dark liners, black hardware packages, and hardtop undersides where you want the trim to disappear.\u003c\/p\u003e\u003cp\u003eThe back of the fixture can warm up in use, so mount it to a surface that is suitable for recessed lighting and keep the rear area free of materials that could be affected by heat.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eClean the bezel and lens with a soft cloth using soap and water. Avoid chemical cleaners, which can haze the lens and compromise the finish over time.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":52256230375605,"sku":"QBP132146","price":120.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284921_qbp132146.webp?v=1771286748","url":"https:\/\/www.qualityboatparts.com\/products\/qbp132146","provider":"Quality Boat Parts","version":"1.0","type":"link"}