{"product_id":"qbp124158","title":"Lumishore LUX LW25 Livewell Light, CRGBW LED, Chrome Bezel, IP68","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04449-00 is a LW25 livewell light with a chrome bezel for installing in livewells, fish boxes, and other wet compartments where the light may be splashed or fully submerged.\u003c\/p\u003e\u003cp\u003eIt runs on 10.5 to 31 V DC (12V or 24V systems) and is sealed to an IP68 rating. Output is full-spectrum CRGBW with tunable white from 2700K to 6500K, so you can run anything from a warm bait-well glow to crisp white light for cleanup.\u003c\/p\u003e\u003cp\u003eThe housing mounts through a 25 mm hole and sits about 30 mm behind the panel, with a 50 mm bezel on the face. Dimming and color control are handled through a LUX Light Control Module, with control from a momentary switch or compatible multifunction display setups.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP68 sealed for wet compartments and submerged use in livewells and fish boxes.\u003c\/li\u003e\n\u003cli\u003e10.5 to 31 V DC input for 12V and 24V boat electrical systems.\u003c\/li\u003e\n\u003cli\u003eFull spectrum CRGBW lighting plus tunable white from 2700K to 6500K.\u003c\/li\u003e\n\u003cli\u003eLow current draw: 0.1A at 12V and 0.05A at 24V.\u003c\/li\u003e\n\u003cli\u003eBulkhead\/panel mount format with a 25 mm cutout and about 30 mm of depth behind the mounting surface.\u003c\/li\u003e\n\u003cli\u003eChrome bezel with a 50 mm front diameter and a 5.4 mm profile for a clean finished look inside the box.\u003c\/li\u003e\n\u003cli\u003eUp to 16 lights supported per control module for multi-well or multi-box installs.\u003c\/li\u003e\n\u003cli\u003eMomentary switch control supported, with the option to expand into compatible display-based control when the system is configured for it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePick a mounting spot where the lens will not be blocked by plumbing, baskets, or standpipes, and confirm you have clearance behind the surface for the 30 mm body plus the wiring bend radius. The cutout is 25 mm, and the light mounts as a bulkhead\/panel fitting.\u003c\/p\u003e\u003cp\u003eIn a livewell or fish box, prep the surface so it is clean and flat, then bed the unit as needed so washdowns and standing water cannot track behind the panel. Leave enough service slack in the wiring so the light can be removed later without straining the connection.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThis light is powered and controlled through a LUX Light Control Module. On straightforward installs, a momentary switch can handle on\/off, dimming, and color changes through the module. On larger systems, the same module-based setup can be tied into compatible display control hardware for screen-based lighting control.\u003c\/p\u003e\u003cp\u003eAt up to 0.1A on a 12V system, multiple lights are typically managed as a group through the control module rather than treated like separate high-load devices. Match wiring and circuit protection to your module and the standards you follow on board.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe LW25 form factor suits bait tanks, transom wells, deck fish boxes, and splash wells where you want a small face profile and a through-panel mount. The chrome bezel is 50 mm across on the front, so confirm you have a flat landing area around the cutout for the bezel to sit cleanly.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eUse color modes for quick bait checks at night without blasting the cockpit with white light, then switch to cooler white when it is time to rinse down or inspect the box. This setup makes sense on fishing boats and cruisers that already run, or plan to run, module-controlled utility and accent lighting.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt and residue off the lens and bezel after trips, and avoid abrasive pads that can haze the surface. If the light lives in a treated livewell, a quick freshwater rinse helps keep buildup from sticking around.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":52256228245685,"sku":"QBP124158","price":117.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284902_qbp124158.jpg?v=1771286730","url":"https:\/\/www.qualityboatparts.com\/products\/qbp124158","provider":"Quality Boat Parts","version":"1.0","type":"link"}