{"product_id":"qbp113894","title":"Lumishore SUPRA Bridge Module, Requires SUPRA i-Connect Hub, 10.5-31V, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04361-00 is a SUPRA Bridge Module that connects a Lumishore SUPRA underwater lighting system to helm control through a compatible MFD, an EOS-LUX-SUPRA display, and WiFi control from a connected device. It runs on 10.5 to 31 V DC for 12 V and 24 V boats, and the enclosure is IP67-rated for wet marine environments.\u003c\/p\u003e\u003cp\u003eAt 113 x 61 x 33 mm (4.45 x 2.4 x 1.3 in) not including cable glands, it fits neatly in an electronics bay near the helm or in a protected locker. This module is used with SUPRA TIX, THX, and SMX 54 underwater lighting systems and requires a SUPRA i-Connect hub for system integration.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eWorks on 10.5 to 31 V DC power, covering both 12 V and 24 V electrical systems.\u003c\/li\u003e\n\u003cli\u003eIP67-rated housing with reverse polarity protection and load dump protection for real-world boat wiring.\u003c\/li\u003e\n\u003cli\u003eMax current draw is 2 A at 12\/24 V.\u003c\/li\u003e\n\u003cli\u003eMFD compatibility includes Garmin OneHelm-enabled, Raymarine Axiom, Simrad NSO EVO2\/EVO3 and NSS EVO3, GO7 XSR, GO9, GO12, and B\u0026amp;G Zeus3 Glass Helm, Zeus3, and Vulcan.\u003c\/li\u003e\n\u003cli\u003eEthernet connection for MFD networks or EOS-LUX-SUPRA display, plus WiFi control via an MFD WiFi link or a local WiFi network.\u003c\/li\u003e\n\u003cli\u003eABS case construction that is flame retardant and halogen free.\u003c\/li\u003e\n\u003cli\u003e3-year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis bridge module is for boats running Lumishore SUPRA underwater lighting, including TIX, THX, and SMX 54 systems. It is part of a SUPRA network and needs a SUPRA i-Connect hub in the system.\u003c\/p\u003e\u003cp\u003eOn the helm side, the module ties into an MFD network or a dedicated EOS-LUX-SUPRA display over Ethernet. Some MFD installations use brand-specific network conversion cabling, so plan that into your rigging before you start pulling wires.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eProvide clean DC power within the 10.5 to 31 V range and mount the module where the cable glands can be routed without hard bends. Pick a location away from heat sources and high vibration, and leave access to the SD card slot for future software updates.\u003c\/p\u003e\u003cp\u003eOnce powered, the built-in configuration routine can find and configure SUPRA fixtures on the network so control pages populate correctly on the MFD or display.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that already have SUPRA underwater lights installed and want control from the helm without adding another standalone controller. It also helps when you want access from a phone or tablet over WiFi at the dock or at anchor, using the same bridge that is tied into the lighting network.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eCheck cable glands and Ethernet connections during routine service, especially after seasonal layup or heavy washdowns. If the system needs a firmware update later, the accessible SD card slot keeps it serviceable without pulling the module out of its mounting location.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":52256226934965,"sku":"QBP113894","price":643.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284881_qbp113894.jpg?v=1771286708","url":"https:\/\/www.qualityboatparts.com\/products\/qbp113894","provider":"Quality Boat Parts","version":"1.0","type":"link"}