{"product_id":"qbp112314","title":"Lumishore Lumishore EOS i-Connect Hub Kit, 10.5-31V, IP68, 4-Light","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04357-00 is a Lumishore EOS i-Connect Hub Kit with a 1 m DMX cable for wiring and controlling EOS Series underwater lights through a single IP68 junction box.\u003c\/p\u003e\u003cp\u003eIt supports up to 4 lights per hub and runs on 10.5 to 31 V DC for 12 V and 24 V systems. Each output is individually fused with a replaceable blade fuse, and each circuit has its own status LED to make troubleshooting faster when one light or cable is acting up.\u003c\/p\u003e\u003cp\u003eThe enclosure is compact at 148 mm x 79 mm x 38 mm (not including cable glands) and is built from weatherproof ABS, which makes it practical for installs inside lockers, behind liners, or other protected spaces close to the transom wiring runs.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSupports up to 4 EOS Series lights per hub; up to 4 hubs per installation (16 lights total)\u003c\/li\u003e\n\u003cli\u003e10.5 to 31 V DC input for 12 V and 24 V systems\u003c\/li\u003e\n\u003cli\u003eMax input current 20 A; max output current 5 A per light circuit\u003c\/li\u003e\n\u003cli\u003eIP68 ingress protection for the enclosure and cable entry\/exit points\u003c\/li\u003e\n\u003cli\u003eReplaceable blade fuse for each light output, plus a status LED for each circuit\u003c\/li\u003e\n\u003cli\u003eBuilt-in switching relay, noise filter, and reverse polarity protection\u003c\/li\u003e\n\u003cli\u003eIncludes a 1 m DMX cable for linking the hub to the control side of the system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eEOS i-Connect hub junction box\u003c\/li\u003e\n\u003cli\u003e1 m DMX cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the hub in a protected, accessible location inside the hull where you can reach the fuses and see the status LEDs. Keep it out of areas that hold standing water, and support the cabling so vibration and movement do not load the connectors or cable glands.\u003c\/p\u003e\u003cp\u003eConnect the DMX cable from the hub to the control side of your setup, then plug each EOS light into its own output. Leave a small service loop and label the light runs so it is easy to match an output to a specific light later.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eFeed the hub from a DC supply within 10.5 to 31 V DC and plan the upstream wiring and protection for up to 20 A maximum input. Since each light circuit is individually fused at the hub, a fault on one light is less likely to take down the rest of the lighting set.\u003c\/p\u003e\u003cp\u003eThe built-in relay handles switching of the connected lights, and the built-in noise filter helps keep lighting loads from interfering with other electronics on board.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis hub is intended for Lumishore EOS Series underwater lights and Lumi-Link based control installations. It is used in systems controlled by an EOS-LUX Command Center, an EOS-LUX-SUPRA display, or a compatible MFD integration path, depending on how the boat is set up.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats running multiple EOS lights on the transom or along the hull sides where you want one service point for power distribution, fuses, and clean cable routing.\u003c\/p\u003e\u003ch6\u003eMaintenance and troubleshooting\u003c\/h6\u003e\u003cp\u003eIf a single light stops working or stops responding, the per-circuit status LEDs and individual fusing help narrow the issue quickly. After any service, reseat the cover and check the cable glands so the IP68 sealing stays intact.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":52256226541749,"sku":"QBP112314","price":267.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284876_qbp112314.jpg?v=1771286704","url":"https:\/\/www.qualityboatparts.com\/products\/qbp112314","provider":"Quality Boat Parts","version":"1.0","type":"link"}