{"product_id":"qbp108248","title":"JL Audio Panel-Mount USB-C\/USB-A Charging Jack, 5V\/2.1A","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-13623-00 is a JL Audio USB-C and USB-A charging jack that mounts through a panel to add a fixed charging point on board. It supplies 5 V charging up to 2.1 A and has a blue LED that lights when the port is powered.\u003c\/p\u003e\u003cp\u003eIt installs in a 1.125\" cutout and clamps to a flat surface up to 1.25\" thick with a rear wing nut. A rubber cover seals the face when the ports are not in use, and the attached cable is 6' (1.83 m) long to help reach your power feed. Your device charging cable is not included.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePanel-mount charging point with one USB-C port and one USB-A port on the face\u003c\/li\u003e\n\u003cli\u003e5 V output charging up to 2.1 A for phones, tablets, and other USB-powered electronics\u003c\/li\u003e\n\u003cli\u003eBlue LED indicates when power is active, so you can see at a glance that the circuit is on\u003c\/li\u003e\n\u003cli\u003eFits a 1.125\" mounting hole and clamps to flat panels up to 1.25\" thick\u003c\/li\u003e\n\u003cli\u003eRubber cover closes over the ports to keep spray and grit out when not charging\u003c\/li\u003e\n\u003cli\u003e6' (1.83 m) overall cable length for flexible routing behind the dash or cabinetry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUSB-C and USB-A panel-mount charging jack with attached 6' (1.83 m) cable\u003c\/li\u003e\n\u003cli\u003eRubber protective cover\u003c\/li\u003e\n\u003cli\u003eRear wing nut for clamping to the mounting surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a good fit anywhere you can drill a clean 1.125\" hole and access the back side to tighten the wing nut. Leave enough clearance behind the panel for the body of the jack and for the cable bend radius so the wiring does not get pinched when you secure it.\u003c\/p\u003e\u003cp\u003eThe front ports accept standard USB-A and USB-C device cables. Keep in mind the unit is a charging point only, so it is meant for powering devices rather than handling audio or data connections.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDrill the 1.125\" cutout, insert the jack from the front, then tighten the wing nut from the back until it is snug and stable. Route the cable away from sharp edges and moving parts, and tie it off so vibration does not work the wiring loose over time.\u003c\/p\u003e\u003cp\u003eConnect it to your boat’s DC system using an appropriately fused circuit and clean, secure terminations. Once powered, the blue LED confirms the port is live before you plug in devices.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis setup makes sense at the helm for a phone running charts, in the cabin for tablets and e-readers, or near a berth for overnight charging. It also works well on boats that have a mix of older USB-A cables and newer USB-C cables in daily use.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eClose the rubber cover whenever the ports are not being used, especially in open cockpits and on boats that see salt spray. If the face gets salt or grime on it, wipe it down with fresh water and a soft cloth and check occasionally that the mounting nut remains snug.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256226279605,"sku":"QBP108248","price":99.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284866_qbp108248.jpg?v=1771286698","url":"https:\/\/www.qualityboatparts.com\/products\/qbp108248","provider":"Quality Boat Parts","version":"1.0","type":"link"}