{"product_id":"qbp105317","title":"Garmin GTEMP10-TH Thru-Hull Temp Sensor, NMEA 2000, 6 ft Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-11413-10 is a GTEMP10-TH thru-hull temperature sensor that puts water temperature onto a NMEA 2000 network. It reads from -13 to 140 F and runs from 9 to 32 Vdc, so it fits common 12V and 24V systems. Power draw is about 0.24 W (20 mA at 12V), and the attached 1.8 m (6 ft) cable reaches a nearby backbone tee.\u003c\/p\u003e\u003cp\u003eInstall it to monitor livewell, baitwell, or the water you are fishing, then view the temperature on a compatible NMEA 2000 display. In multi-sensor setups, each sensor can be identified by location, and the temperature source, sensor instance, and offset can be adjusted from the NMEA 2000 device list.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eThru-hull install supports hull thickness from 0 to 57 mm (0 to 2.25 in.).\u003c\/li\u003e\n\u003cli\u003eMounting hole uses a 25 mm (1 in.) hole saw for the thru-hull opening.\u003c\/li\u003e\n\u003cli\u003eWater temperature sensing range: -13 to 140 F for baitwell, livewell, or outside water monitoring.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 plug-and-play connection; transmits temperature data (including PGNs 130312 and 130316) on the network.\u003c\/li\u003e\n\u003cli\u003eWide power input from 9 to 32 Vdc with low draw of about 0.24 W (20 mA at 12V).\u003c\/li\u003e\n\u003cli\u003eAttached 1.8 m (6 ft) cable for a standard NMEA 2000 drop to the backbone.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGTEMP10-TH thru-hull temperature sensor with attached 1.8 m (6 ft) cable\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eChoose a location where the sensor will not be jarred during launching, hauling, or storage, and confirm the hull thickness falls within the supported range. The install is a straightforward thru-hull pass-through: drill the 25 mm hole from outside the boat, fit the sensor, and bed it with marine sealant as you tighten it down.\u003c\/p\u003e\u003cp\u003eOn cored fiberglass, the core around the hole is relieved and sealed before final mounting so water cannot wick into the laminate. Metal hull installs call for cleaning and dressing the hole edges so the fitting sits properly and the sealant can do its job.\u003c\/p\u003e\u003ch6\u003eNMEA 2000 integration\u003c\/h6\u003e\u003cp\u003eThis sensor is a NMEA 2000 device and connects like any other drop on a properly powered backbone with terminators. Once on the network, it shows up in the device list where you can assign the temperature source location, set an offset if needed, and manage sensor numbering when more than one temperature source is installed.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for anglers running a NMEA 2000 network who want temperature on-screen for tuning livewell and baitwell conditions or watching surface temperature changes while trolling. It also fits boats that already rely on network data at the helm and want a dedicated, thru-hull temperature point instead of a transom-mounted pickup.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring haul-out, check the fitting for any movement and inspect the bedding sealant around the flange. Keeping growth off the sensing area helps the reading respond normally, especially on boats that live in the water year-round.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269206667445,"sku":"QBP105317","price":119.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299030_qbp105317.jpg?v=1771542463","url":"https:\/\/www.qualityboatparts.com\/products\/qbp105317","provider":"Quality Boat Parts","version":"1.0","type":"link"}