{"product_id":"qbp097805","title":"JL Audio M6-880ETXv3 Enclosed Tower Coaxial Speaker System, 8.8in, 125W RMS Each, 4 Ohm, Gloss White Enclosure, Gloss White Classic Grille, Black Tweeter Mesh, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe JL Audio 010-03280-00 is an 8.8-inch marine enclosed tower coaxial speaker system sold as a pair, built around a 4-ohm load with 125 W continuous power handling per speaker.\u003c\/p\u003e\u003cp\u003eEach enclosure measures about 8.80 in across and 14.73 in deep, which helps when you are checking tower clearance under a bimini or hardtop. Finish is a gloss white enclosure with a gloss white trim ring and gloss white Classic grille, plus a black mesh over the 1.25-inch silk-dome tweeter. This configuration is also referenced as M6-880ETXv3-Gw-C-GwGw.\u003c\/p\u003e\u003cp\u003eThey mount using compatible clamp fixtures that are required and sold separately, with wiring routed through the fixture for a cleaner run on a tower or arch. Plan amplifier power in the 50 to 250 W per channel range and keep wiring and connections suited for wet, vibrating spaces on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8.8-inch (224 mm) enclosed tower coaxial speakers, sold as a pair\u003c\/li\u003e\n\u003cli\u003e4-ohm nominal impedance; 125 W RMS continuous power handling per speaker\u003c\/li\u003e\n\u003cli\u003eRecommended amplifier power: 50 to 250 W per channel\u003c\/li\u003e\n\u003cli\u003eFrequency response: 38 Hz to 20 kHz (plus or minus 3 dB); sensitivity 90.5 dB at 1 W\/1 m\u003c\/li\u003e\n\u003cli\u003eEnclosure diameter 8.80 in; enclosure depth 14.73 in; height with clamp receiver 9.67 in\u003c\/li\u003e\n\u003cli\u003eInjection-molded enclosure with a mica-filled polypropylene woofer cone and synthetic rubber surround\u003c\/li\u003e\n\u003cli\u003e1.25-inch silk-dome tweeter with black mesh and a built-in 2-way crossover\u003c\/li\u003e\n\u003cli\u003eGloss white enclosure with gloss white trim ring and gloss white Classic grille\u003c\/li\u003e\n\u003cli\u003eMounting clamps and fixtures are required and sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo enclosed tower coaxial speaker systems (pair)\u003c\/li\u003e\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThese speakers are meant to mount high on a wake tower, T-top, arch, or hardtop using the matching clamp fixtures. Measure your tube or mounting surface first, then select a fixture style and diameter that matches the mount and the aiming you need.\u003c\/p\u003e\u003cp\u003eLeave room for the enclosure depth, and make sure the speaker will clear bimini hardware and board racks through the full range of movement. Route speaker wire through the tower when possible, use tinned copper marine cable, and seal any pass-through points to keep water out of the tube.\u003c\/p\u003e\u003ch6\u003eCompatibility and system planning\u003c\/h6\u003e\u003cp\u003eEach speaker presents a 4-ohm load, so most marine amplifiers can drive them directly on a single channel per speaker. If you are bridging channels or wiring multiple speakers together, confirm the final impedance stays within your amplifier's limits.\u003c\/p\u003e\u003cp\u003eThe passive crossover is built in, so you feed it a full-range amplified signal. Set gain and filtering at the amplifier to match the way you listen on the water.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup is a practical match for wake and surf boats that need tower audio to carry back to the rider, and for open-cockpit boats that want more output up top without cutting into interior panels. It also fits well in systems already running an external amplifier in the 50 to 250 W per channel range.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the enclosures and grilles with fresh water and let them dry before covering the boat. Periodically recheck clamp hardware and inspect wiring at the tower base for chafe.\u003c\/p\u003e","brand":"JL Audio","offers":[{"title":"Default Title","offer_id":52256223822005,"sku":"QBP097805","price":1193.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284794_qbp097805.webp?v=1771286673","url":"https:\/\/www.qualityboatparts.com\/products\/qbp097805","provider":"Quality Boat Parts","version":"1.0","type":"link"}