{"product_id":"qbp090654","title":"Lumishore SUPRA THX404 Thru-Hull Underwater LED Light, Dual-Color Blue\/White, 8150 lm, 10.5-31V, IP68, External Driver","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lumishore 010-04516-00 is a SUPRA THX404 thru-hull underwater LED light with an external driver, giving you blue and white output on 10.5 to 31 V DC systems.\u003c\/p\u003e\u003cp\u003eIn white mode it produces up to 8,150 fixture lumens with a 110 degree beam, and the assembly is IP68-rated for permanent underwater mounting. From the outside you get a flush face that measures 86 mm (3.39 in) across with an 11 mm (0.43 in) profile.\u003c\/p\u003e\u003cp\u003eThe driver handles color switching plus dimming, fade and strobe modes. The light lead is a 3 m (9.8 ft) pre-terminated cable, so it helps to plan the driver location and cable route before drilling.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDual-color output (blue and white) with brightness control plus fade and strobe modes\u003c\/li\u003e\n\u003cli\u003e8,150 fixture lumens (white) and a 110 degree beam for a broad spread of light\u003c\/li\u003e\n\u003cli\u003eSupply voltage range: 10.5 to 31 V DC; max current draw 6.4 A at 12 V or 3.2 A at 24 V\u003c\/li\u003e\n\u003cli\u003eIP68 water-ingress rating for below-the-waterline installation\u003c\/li\u003e\n\u003cli\u003eThru-hull format with a 140 mm (5.51 in) shaft length and a 27 mm (1-1\/16 in) shaft cut-out\u003c\/li\u003e\n\u003cli\u003eMarine bronze body with a borosilicate glass lens\u003c\/li\u003e\n\u003cli\u003e3 m (9.8 ft) pre-terminated light cable; driver has a 1 m (3 ft) power lead\u003c\/li\u003e\n\u003cli\u003eDriver protections include surge protection, reverse polarity protection and automatic thermal roll-back\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSUPRA THX404 thru-hull light module\u003c\/li\u003e\n\u003cli\u003eExternal driver module\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a thru-hull install, so you will want solid access on both sides of the mounting area for drilling, sealing, and tightening the hardware. The light is intended for a flat mounting surface on the transom or side hull, and it is typically placed 150 to 250 mm (6 to 10 in) below the minimum load waterline.\u003c\/p\u003e\u003cp\u003eThe face sits nearly flush outside the hull, while the body and cabling land inside. Allow room for the 140 mm shaft, the connector, and a clean cable bend so the lead is not pulled tight when the boat flexes or slams in a chop.\u003c\/p\u003e\u003ch6\u003eElectrical and control\u003c\/h6\u003e\u003cp\u003ePower is straightforward DC through a proper fuse or breaker. A 10 A fuse is specified for 12 V installations, and a 5 A fuse is specified for 24 V installations. Mount the driver in a dry, well-ventilated location inside the boat and keep power runs as short as practical to avoid voltage drop.\u003c\/p\u003e\u003cp\u003eFor control, the light ties into a SUPRA i-Connect Hub and Switch, and it can also be controlled from a compatible MFD when a SUPRA Bridge module is added. That helm control is what enables the mode changes, dimming, fade, and strobe functions without adding separate switches at the transom.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe 10.5 to 31 V DC input range covers common 12 V and 24 V battery systems, which makes it suitable for a wide range of center consoles, sportfishers, express boats, and cruisers. If you are working with a metal or carbon hull, plan on isolating the thru-hull body per standard practice for underwater fittings.\u003c\/p\u003e\u003cp\u003eThis light is a good match for owners who want a thru-hull style install with two usable colors and the option to run lighting scenes from the helm, while keeping the external profile low on the transom.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eLike any underwater light, output drops when the lens gets a film of growth. A quick wipe during routine hull cleaning keeps the beam looking even. Avoid abrasive pads that can scratch the glass and make growth stick faster.\u003c\/p\u003e","brand":"Lumishore","offers":[{"title":"Default Title","offer_id":52256222511285,"sku":"QBP090654","price":1600.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1284730_qbp090654.jpg?v=1771286648","url":"https:\/\/www.qualityboatparts.com\/products\/qbp090654","provider":"Quality Boat Parts","version":"1.0","type":"link"}