{"product_id":"qbp090068","title":"Garmin MVi-DRCADAPT DRC Adapter, For JL Audio MVi, For DRC-205","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13865-00 is a rotary DRC adaptor that lets a rotary-style JL Audio Digital Remote Controller connect to a JL Audio MVi amplifier through the JLid-COMM port. It draws power through the JLid connection, so you do not have to run a separate 12V feed just for the adaptor.\u003c\/p\u003e\u003cp\u003eMounted close to the amplifier, it provides an RJ45 connection point for the remote controller cable and a multi-color status LED you can see during setup. This adaptor is for rotary-style DRC controllers and it is not used with the M-DRC-50 push-button controller.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects a rotary-style JL Audio DRC, including the DRC-205, to a compatible MVi amplifier via the JLid-COMM port\u003c\/li\u003e\n\u003cli\u003ePowered through JLid, with no separate power wiring required for the adaptor\u003c\/li\u003e\n\u003cli\u003eRJ45 jack for the remote controller cable run to the helm\u003c\/li\u003e\n\u003cli\u003eMulti-color JLid status LED for quick confirmation of connection state and fault conditions\u003c\/li\u003e\n\u003cli\u003eNot compatible with mono MV amplifiers or the MVi-HUB communication hub\u003c\/li\u003e\n\u003cli\u003eMounting clip and two screws included for securing the module near the amplifier\u003c\/li\u003e\n\u003cli\u003eRotary DRC controller is sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis adaptor is used with JL Audio MVi amplifiers that have a JLid-COMM port and support rotary-style DRC control. It does not work with mono MV amplifiers, and it does not connect through the MVi-HUB.\u003c\/p\u003e\u003cp\u003eIf your system uses the M-DRC-50 push-button controller, that controller connects directly and this adaptor is not part of the installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the module near the amplifier in a protected location inside the console or cabin where the JLid status LED remains visible. Fasten the supplied mounting clip to a flat surface, snap the adaptor into the clip, then plug the adaptor lead into the amplifier's JLid-COMM port.\u003c\/p\u003e\u003cp\u003eConnect the compatible rotary DRC controller cable to the adaptor's RJ45 jack and route that cable to the helm with attention to chafe protection and clean strain relief. Keep the run away from high-current power wiring where possible to avoid introducing noise into nearby signal paths.\u003c\/p\u003e\u003ch6\u003eStatus indication\u003c\/h6\u003e\u003cp\u003eThe on-unit LED reports JLid status: green while detection is in progress, blue when a compatible DRC is connected, yellow for an unrecognized JLid device, and alternating yellow-green for a faulty JLid device. If the adaptor turns off due to a JLid short circuit condition, the adaptor LED will be off and the connected amplifier's JLid-COMM port LED will flash red.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match when the amplifier is installed out of reach in a console, cabin locker, or under a seat and you want rotary control at the helm without opening the amp compartment. It keeps day-to-day adjustments like master level and balance or fade, along with preset access, within easy reach depending on how your MVi system is configured.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMVi-DRCADAPT module\u003c\/li\u003e\n\u003cli\u003eMounting clip\u003c\/li\u003e\n\u003cli\u003eTwo mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269753172149,"sku":"QBP090068","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301253_qbp090068.webp?v=1771545562","url":"https:\/\/www.qualityboatparts.com\/products\/qbp090068","provider":"Quality Boat Parts","version":"1.0","type":"link"}