{"product_id":"qbp089399","title":"Garmin M-DRC-50 JL Audio Digital Preset Controller, For JLid Port, IP66 Front, 18 ft Control Cable","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-13551-00 is the JL Audio M-DRC-50 digital preset controller for JLid-compatible JL Audio marine audio electronics. It gives you push-button access to stored DSP presets, with a built-in RGB indicator that shows the selected preset by color. It mounts through a single hole, fits panels up to 3\/4 in (19 mm) thick, and includes an 18 ft (5.5 m) control cable.\u003c\/p\u003e\u003cp\u003eInstalled at the helm or anywhere you want quick access, it connects to the JLid port on compatible equipment and draws power through that connection, so there is no separate power wiring to run. The front face is IP66-rated when properly installed, which helps in wet cockpit conditions and during routine washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePush-button selection of stored DSP presets on compatible JL Audio electronics\u003c\/li\u003e\n\u003cli\u003eRGB indicator shows the selected preset by color\u003c\/li\u003e\n\u003cli\u003eJLid connection handles control and power, with no separate power wiring required\u003c\/li\u003e\n\u003cli\u003e18 ft (5.5 m) control cable included, with a protective connection sleeve\u003c\/li\u003e\n\u003cli\u003eOne-hole, panel-mount installation for panels up to 3\/4 in (19 mm) thick\u003c\/li\u003e\n\u003cli\u003eIP66-rated from the front when properly installed\u003c\/li\u003e\n\u003cli\u003eWorks with JL Audio MVi amplifiers and the MVi-HUB, and is not compatible with mono MV amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eDigital preset controller (M-DRC-50)\u003c\/li\u003e\n\u003cli\u003e18 ft (5.5 m) control cable with protective connection sleeve\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting spot where you can reach it easily underway, and where the back of the panel has clearance for the body of the controller and cable bend. A clean, properly sealed install matters in a marine dash, especially on open boats where spray and washdowns are common.\u003c\/p\u003e\u003cp\u003eRoute the control cable back to the amplifier or hub location and connect it to the JLid port on compatible equipment. Once presets are set up in your JL Audio system, the controller simply recalls them on demand, which is handy when you want quick changes without opening access panels or apps.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis controller is for systems that use JLid and support stored DSP presets on compatible JL Audio electronics. It is a wired controller, so it is best suited to installs where an 18 ft (5.5 m) cable run from the mounting panel to the equipment bay makes sense.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eIt’s a good match for boats that already run JL Audio MVi gear and want fast access to preset changes from the helm, a cabin bulkhead, or an entertainment zone. It also fits installs where you want a simple, tactile control that stays usable with wet hands and underway vibrations.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the front face with fresh water after salt exposure and wipe it down with a soft cloth. If you ever remove it, inspect the seal area and reinstall carefully so the front-face water protection is maintained.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269753106613,"sku":"QBP089399","price":129.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301251_qbp089399.webp?v=1771545561","url":"https:\/\/www.qualityboatparts.com\/products\/qbp089399","provider":"Quality Boat Parts","version":"1.0","type":"link"}