{"product_id":"qbp074882","title":"Victron Energy VE.Can to CAN-bus BMS Type B Cable, 1.8m","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy ASS030720118 is a VE.Can to CAN-bus BMS Type B cable for linking a compatible CAN-bus enabled battery to a Victron system. It is a 1.8 m cable, about 5.9 ft, used where the battery installation calls for the Victron Type B CAN-bus BMS wiring layout.\u003c\/p\u003e\u003cp\u003eThis cable is commonly used in marine Victron installations where a GX device needs battery data from a supported third-party lithium battery. On a boat, that communication link matters for monitoring state of charge, alarms, and system behavior from the helm, nav station, or electrical locker.\u003c\/p\u003e\u003cp\u003eOne end is labeled for the CAN-bus BMS side at the battery, and the VE.Can end connects to a compatible Victron GX device through its VE.Can or BMS-Can port. Battery brand and model compatibility should be checked against the battery installation guidance before fitting, since Victron Type A and Type B CAN-bus BMS cables use different pin layouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1.8 m cable length gives practical reach for nearby battery-to-GX installations in compact marine electrical spaces.\u003c\/li\u003e\n\u003cli\u003eType B CAN-bus BMS wiring for battery systems that require the Victron Type B cable layout.\u003c\/li\u003e\n\u003cli\u003eConnects a CAN-bus enabled non-Victron battery to a Victron GX-based monitoring and control system.\u003c\/li\u003e\n\u003cli\u003eVE.Can side connects to a compatible GX device through the VE.Can or BMS-Can port.\u003c\/li\u003e\n\u003cli\u003eBattery side is labeled for the CAN-bus BMS connection, helping reduce mix-ups during installation.\u003c\/li\u003e\n\u003cli\u003eUseful for lithium battery installations where battery communication is needed for system monitoring rather than only basic voltage sensing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the cable with the CAN-bus BMS end at the battery and the VE.Can end at the Victron GX device. The Type B pin-out is specific, so it should not be treated as a generic straight-through network patch lead unless the battery documentation explicitly allows that wiring.\u003c\/p\u003e\u003cp\u003eAfter connection, configure the GX device for the battery system being used. In many installations, a VE.Can terminator may also be required in the remaining VE.Can socket on the GX device, depending on the full network layout.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis cable is for CAN-bus enabled batteries that call for the Victron VE.Can to CAN-bus BMS Type B cable. Examples commonly associated with the Type B cable include AXIstorage 7S and 9S, BMZ, BSLBATT Lithium battery, LG Chem RESU, Pylontech US2000, US3000, and UP2500, Solar MD BMS EX, and Freedom Won eTower.\u003c\/p\u003e\u003cp\u003eIt is a good match for marine systems built around Victron monitoring hardware, especially cruisers, fishing boats, and off-grid vessels using lithium battery banks where the battery BMS needs to communicate with the onboard power system.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52581859360949,"sku":"QBP074882","price":21.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332331_qbp074882.jpg?v=1780200784","url":"https:\/\/www.qualityboatparts.com\/products\/qbp074882","provider":"Quality Boat Parts","version":"1.0","type":"link"}