{"product_id":"qbp069233","title":"Victron Energy Orion XS 12\/12-50A DC-DC Battery Charger, 700W","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Victron Energy ORI121217050 is an Orion XS 12\/12-50A DC-DC battery charger for charging a 12V service battery from a 12V starter battery or alternator source. It is a good fit for boats that need controlled alternator charging for house batteries, especially where space is tight and the charger may be mounted near an engine room, battery compartment, or electrical panel.\u003c\/p\u003e\u003cp\u003eThis unit supports a 9-17V input range and an adjustable 10-17V output range, with input and output current settings from 1A to 50A. At a typical 14V charging voltage, it delivers up to 700W of continuous output power up to 40°C with proper cooling, so it can handle serious service-bank charging without taking over the installation space.\u003c\/p\u003e\u003cp\u003eBluetooth Smart and the VictronConnect app make setup and monitoring straightforward, while VE.Direct and VE.Smart Networking allow the charger to work as part of a broader Victron system. The IP65 housing, fanless construction, and compact 137.3 x 123.1 x 40mm size make it practical for marine electrical installations where dust, spray, heat, and vibration are part of daily use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12\/12-50A DC-DC battery charger for charging a 12V service bank from a 12V starter battery or alternator source.\u003c\/li\u003e\n\u003cli\u003eAdjustable 1-50A input and output current settings help match charging demand to the alternator and battery bank.\u003c\/li\u003e\n\u003cli\u003eUp to 700W continuous output at a typical 14V charge voltage, with up to 98.5% efficiency.\u003c\/li\u003e\n\u003cli\u003eBluetooth Smart support allows setup, monitoring, and output voltage adjustment through the VictronConnect app.\u003c\/li\u003e\n\u003cli\u003eVE.Direct port supports integration with compatible Victron GX devices, including DVCC when firmware requirements are met.\u003c\/li\u003e\n\u003cli\u003eVE.Smart Networking can receive wireless voltage, temperature, and current sense data from compatible Victron devices.\u003c\/li\u003e\n\u003cli\u003eIP65 protection helps the housing cope with dust and water exposure in demanding onboard locations.\u003c\/li\u003e\n\u003cli\u003eFanless cooling reduces noise and avoids the extra failure point of a cooling fan.\u003c\/li\u003e\n\u003cli\u003eScrew terminals accept cable up to 4AWG, giving installers room for properly sized conductors on higher-current DC runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe charger should be mounted vertically on a non-flammable surface with the power terminals facing downward. Leave at least 10cm of free space around the unit so heat can move away from the housing, especially in lockers, engine spaces, or enclosed electrical compartments where airflow may be limited.\u003c\/p\u003e\u003cp\u003eMounting close to the battery helps reduce voltage drop, but it should not be installed directly above a battery where gassing could affect the electronics. Cable sizing, overcurrent protection, and routing should be planned for the current setting, cable length, and the layout of the boat’s DC system.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe Orion XS can be configured for different battery charge profiles, including common lead-acid and lithium setups. The adjustable output voltage and current control make it useful when upgrading an older split-charge arrangement to a more controlled charging system for modern house batteries.\u003c\/p\u003e\u003cp\u003eFor Victron-based systems, Bluetooth setup is useful for standalone installations, while VE.Direct gives a clean path into a GX monitoring environment. VE.Smart Networking can also improve charging accuracy by using shared sensing data from compatible Victron battery monitors or sensors.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis charger suits cruising boats, fishing boats, workboats, and compact refits where the alternator is used to replenish a service battery while underway. It is especially relevant for vessels with electronics, refrigeration, lighting, pumps, or navigation equipment drawing from a separate house bank.\u003c\/p\u003e\u003cp\u003eThe compact housing and quiet, fanless operation also make it easier to place in real boat spaces where access, airflow, and noise all matter. It gives the installer a controlled charging stage between the engine battery side and the service battery side rather than relying on a simple direct connection.\u003c\/p\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":52581877121205,"sku":"QBP069233","price":328.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1332315_qbp069233.jpg?v=1780201054","url":"https:\/\/www.qualityboatparts.com\/products\/qbp069233","provider":"Quality Boat Parts","version":"1.0","type":"link"}