{"product_id":"qbp048388","title":"Plash Gravity Surface Mounted LED Deck Light, 6000K Cool White Light, White Housing, 105 Lumens, 1.2W, IP67","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Plash Gravity is a surface mounted LED deck light for adding cool white working and accent light to boat decks, cockpits, hardtops, cabins, and other fiberglass mounting areas without cutting a large core hole. It uses a white housing with a cool white 6000K LED output, and the range includes both 12VDC and 24VDC versions to match the vessel electrical system.\u003c\/p\u003e\u003cp\u003eThis light is built around a machined aluminum housing and mounts directly to the surface. Installation is straightforward for new builds, refits, and lighting upgrades: route the wiring, make the electrical connection, and fasten the unit to the roof, wall, or panel. With 105 lumens, 1.2W power draw, IP67 rating, and a 120 degree beam angle, it fits the kind of low-profile deck lighting often needed around consoles, under hardtops, along walkways, or inside enclosed marine spaces.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface mounted Gravity LED deck light for fiberglass roofs, walls, panels, and similar boat surfaces.\u003c\/li\u003e\n\u003cli\u003eWhite housing with cool white 6000K light output for a clean work-light appearance on board.\u003c\/li\u003e\n\u003cli\u003e105 lumen output with 1.2W power consumption for low-draw deck, cockpit, cabin, and accent lighting.\u003c\/li\u003e\n\u003cli\u003eAvailable in 12VDC and 24VDC versions to match common marine electrical systems.\u003c\/li\u003e\n\u003cli\u003eIP67 rating helps the light handle wet marine locations, spray, and washdown exposure when installed correctly.\u003c\/li\u003e\n\u003cli\u003eMachined aluminum housing gives the fixture a solid mounting body for marine use.\u003c\/li\u003e\n\u003cli\u003eUses 1 OSRAM 1W LED with a 120 degree beam angle for wide area coverage from a compact fixture.\u003c\/li\u003e\n\u003cli\u003e9 ft tinned copper power wire with a black insulated jacket supports practical routing during installation.\u003c\/li\u003e\n\u003cli\u003eFaceplate options include Dome, Eyelid, and Surface Mount styles for different light spread and finished appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe range varies by faceplate style and voltage. Faceplate options include Dome, Eyelid, and Surface Mount, while voltage options include 12VDC and 24VDC versions. The shared product family uses the same Gravity surface mounted deck light format with a white housing and cool white output.\u003c\/p\u003e\u003cp\u003eThe Dome faceplate gives the fixture a rounded finished look, the Eyelid faceplate helps direct the visible light pattern with a shielded appearance, and the Surface Mount faceplate keeps the installation simple and clean on flat mounting areas. The voltage selection should match the boat circuit where the light will be installed.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis light is intended for surface mounting, so it works well where a low-profile fixture is needed without coring a large hole through the mounting surface. Plan the wire route before fastening the light, confirm that the selected 12VDC or 24VDC version matches the circuit, and seal the mounting area using normal marine electrical installation practices.\u003c\/p\u003e\u003cp\u003eThe 9 ft tinned copper lead gives installers room to route the wire to a switch, distribution block, or lighting circuit without immediately adding a splice at the fixture. As with any exterior or semi-exposed boat light, connections should be protected from moisture and strain.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThe Gravity deck light is a practical match for boat owners and builders adding low-profile illumination around hardtops, cockpits, walkways, cabin entries, storage areas, and other places where a compact light with wide coverage is useful. The cool white output suits work areas where visibility matters, including fishing decks, rigging stations, helm-adjacent spaces, and dockside tasks after dark.\u003c\/p\u003e","brand":"Plash","offers":[{"title":"Eyelid \/ 12V","offer_id":52713642852533,"sku":"QBP048388-V1","price":42.85,"currency_code":"USD","in_stock":true},{"title":"Eyelid \/ 24V","offer_id":52713642885301,"sku":"QBP048388-V2","price":42.85,"currency_code":"USD","in_stock":true},{"title":"Dome \/ 12V","offer_id":52713642918069,"sku":"QBP048388-V3","price":42.85,"currency_code":"USD","in_stock":true},{"title":"Dome \/ 24V","offer_id":52713642950837,"sku":"QBP048388-V4","price":42.85,"currency_code":"USD","in_stock":true},{"title":"Surface Mount \/ 12V","offer_id":52713642983605,"sku":"QBP048388-V5","price":42.85,"currency_code":"USD","in_stock":true},{"title":"Surface Mount \/ 24V","offer_id":52713643016373,"sku":"QBP048388-V6","price":42.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1337697_qbp048388.webp?v=1781639208","url":"https:\/\/www.qualityboatparts.com\/products\/qbp048388","provider":"Quality Boat Parts","version":"1.0","type":"link"}