{"product_id":"qbp041830","title":"Lopolight PRO Series 360° Double Red Navigation Light, 3NM Visibility, 20-32VDC, IP68, Built-In De-Icing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Lopolight 300-114G2ST-PRO-I is a 3 nm, 360° red double navigation and signal light with a built-in de-icing function for larger commercial vessels. It runs on 20-32 VDC (24 V systems), is sealed to IP68, and draws about 2.9 W.\u003c\/p\u003e\u003cp\u003eThe housing measures Ø92.5 mm x 112 mm and uses a hard coat anodized aluminum body with a PMMA lens. It is approved to COLREG72 and EN14744, and it is also listed for IEC 60945 and IACS E10.\u003c\/p\u003e\u003cp\u003eThis is a good match for operators who need an all-round red light that stays visible in spray and cold weather, including vessels that see winter service where icing can block a lens.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3 nm visibility with a full 360° red sector in a double-light configuration\u003c\/li\u003e\n\u003cli\u003eBuilt-in de-icing and a stated operating range of -60°C to 55°C\u003c\/li\u003e\n\u003cli\u003e20-32 VDC input for 24 V systems; power draw listed as 2.9 W (about 120 mA at 24 VDC)\u003c\/li\u003e\n\u003cli\u003eIP68-rated assembly with plug-connector connection for service-friendly removal\u003c\/li\u003e\n\u003cli\u003eHorizontal mounting on a 400-037 POM base, with side cable exit and an HDPE base plate\u003c\/li\u003e\n\u003cli\u003eHard coat anodized aluminum (50 micron) housing with PMMA lens and A4 stainless steel screws\u003c\/li\u003e\n\u003cli\u003eCompact footprint (Ø92.5 mm x 112 mm) and 1.52 kg weight for mast or superstructure mounting\u003c\/li\u003e\n\u003cli\u003eMinimum feed wire gauge listed as 1.5 mm² (AWG 18)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eNavigation light assembly\u003c\/li\u003e\n\u003cli\u003e400-037 POM mounting base\u003c\/li\u003e\n\u003cli\u003eHDPE base plate\u003c\/li\u003e\n\u003cli\u003eCable gland for 7-13 mm (9\/32\" to 1\/2\") cable diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting location so the light has an unobstructed 360° view and the lens sits level. On larger vessels this is often on a mast platform or a dedicated bracket on the superstructure, clear of antennas, davits, rails, and other structures that can mask the arc.\u003c\/p\u003e\u003cp\u003eThe unit mounts horizontally to the 400-037 base, and the cable exits to the side. Route the cable so it is supported against vibration, with a drip loop before the deck penetration and enough slack to disconnect the plug connector during service.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eSupply is 20-32 VDC, which aligns with 24 VDC shipboard systems. With a listed draw of 2.9 W, circuit loading is modest, but de-icing is meant for cold-weather operation, so the circuit should be wired and protected to your vessel standards.\u003c\/p\u003e\u003cp\u003eUse at least 1.5 mm² (AWG 18) feed conductors as a minimum and keep terminations sealed from moisture. If you are tying into a navigation light panel or monitoring system, confirm it supports the light's voltage range and the plug-connector interface.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt deposits during routine washdowns and inspect the lens and cable gland for loosening. In icing conditions, confirm the lens area stays clear and re-check fasteners on the base after the first few runs.\u003c\/p\u003e","brand":"Lopolight","offers":[{"title":"Default Title","offer_id":52269740916917,"sku":"QBP041830","price":1760.86,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301167_qbp041830.png?v=1771545490","url":"https:\/\/www.qualityboatparts.com\/products\/qbp041830","provider":"Quality Boat Parts","version":"1.0","type":"link"}