{"product_id":"qbp036849","title":"Garmin GOS 10 Engine Cutoff Hub, For Garmin OnBoard System, Wireless MOB Tags, NMEA 2000, 10-35V, IPX7, Bluetooth","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02908-10 is the GOS 10 hub for the Garmin OnBoard wireless MOB tag and engine cutoff system. It communicates wirelessly with MOB tags and connects in-line to your boat’s ignition harness so the system can trigger an engine cut off event when required. For the system to operate, the hub must be on the same NMEA 2000 network as at least one compatible Garmin chartplotter.\u003c\/p\u003e\u003cp\u003ePower is supplied separately through the included fused harness, and the hub does not draw power from the NMEA 2000 network. It supports 10 to 32 VDC input for 12V and 24V boats, with a typical draw of 50 mA at 12V (0.6 W). Wireless range is listed at 66 ft (up to 20 m), which helps when the helm and cockpit are a few steps apart.\u003c\/p\u003e\u003cp\u003eThe enclosure is rated IPX6 and IPX7 and is sized at 91.55 mm x 155.12 mm x 48.47 mm (171.7 g). Operating temperature range is -15 C to 70 C, and the compass-safe distance is 5 cm.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eConnects wirelessly to Garmin OnBoard MOB tags and interfaces with your engine ignition harness for ECOS functionality\u003c\/li\u003e\n\u003cli\u003eRequires connection to the same NMEA 2000 network as a compatible Garmin chartplotter for setup, alerts, and device visibility\u003c\/li\u003e\n\u003cli\u003e10 to 32 VDC supply range with separate power input through an included fused harness (does not receive power from NMEA 2000)\u003c\/li\u003e\n\u003cli\u003eSupports up to 4 close-to-stop engines or up to 2 open-to-stop engines\u003c\/li\u003e\n\u003cli\u003eWireless range: 66 ft (up to 20 m)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 LEN: 1\u003c\/li\u003e\n\u003cli\u003eWater rating: IPX6 and IPX7; operating temperature range: -15 C to 70 C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan a mounting spot that keeps wiring runs clean to the helm NMEA 2000 backbone and to the engine ignition harness connection point. The included external antenna is intended to be mounted where it can “see” the areas people move around, which helps maintain a stable tag connection in real-world cockpit and deck layouts.\u003c\/p\u003e\u003cp\u003eOnce connected, the hub appears on the chartplotter through the NMEA 2000 device list, which is useful for confirming the network connection and checking basic status during commissioning.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis hub is intended for the Garmin OnBoard system and is built to work with inboard, outboard, and sterndrive engines from major manufacturers via a hardwired, in-line ignition harness connection. Engine support is specified as up to 4 close-to-stop engines or 2 open-to-stop engines, so multi-outboard and twin-engine setups can be accommodated when the ignition wiring matches those modes.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats where you want MOB alerts and an engine cutoff system managed at the helm, with the hub integrated into an existing NMEA 2000 network.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGOS 10 hub for the Garmin OnBoard system\u003c\/li\u003e\n\u003cli\u003e12-pin fused power and engine cut-off harness with external buzzer\u003c\/li\u003e\n\u003cli\u003eExternal antenna for wireless connection to MOB tags\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 drop cable\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter washdowns or a wet run, check that the harness and antenna connections remain fully seated and that cable routing has not chafed against sharp edges. Keep the unit mounted where it is protected from direct impacts, and avoid storing heavy gear where it can press on the wiring.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269738983605,"sku":"QBP036849","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301154_qbp036849.webp?v=1771545481","url":"https:\/\/www.qualityboatparts.com\/products\/qbp036849","provider":"Quality Boat Parts","version":"1.0","type":"link"}