{"product_id":"qbp035947","title":"Garmin GT360UHD Transducer, For Spy Pole, 360-Degree OneVü, 455\/800\/1070 kHz, 500W, 12-Pin","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-03012-10 is a GT360UHD 12-pin transducer for Garmin Spy Pole systems, made for capturing 360-degree OneVü sonar imagery around the boat in 2D and 3D views. It gives anglers a bird's-eye view of structure, bait, cover, and fish around the boat, then keeps the scanned image tied to location with True Motion technology as the boat moves.\u003c\/p\u003e\u003cp\u003eThis transducer supports High-Definition SideVü at 455\/800 kHz and Ultra-High-Definition SideVü at 1.0 MHz, with CHIRP ranges of 400-500 kHz, 740-900 kHz, and 940-1100 kHz. It also supports traditional sonar at about 300 kHz. The housing measures 58.1 mm x 215.9 mm x 97.0 mm, and the operating temperature range is 0°C to 50°C.\u003c\/p\u003e\u003cp\u003eOn the water, it is a practical fit for anglers who use a Garmin chartplotter and Spy Pole setup to scan around the boat without constantly repositioning the vessel. It can also be used with a compatible LiveScope transducer setup to layer live sonar over the 360-degree imagery.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCaptures 360-degree OneVü sonar imagery around the boat in 2D and 3D views when mounted on a Spy Pole.\u003c\/li\u003e\n\u003cli\u003e12-pin transducer connection for compatible Garmin chartplotter systems.\u003c\/li\u003e\n\u003cli\u003eHigh-Definition SideVü supports 455\/800 kHz, while Ultra-High-Definition SideVü supports 1.0 MHz for detailed side-scanning coverage.\u003c\/li\u003e\n\u003cli\u003eSideVü 1 transmits at 500 W RMS and can cover up to 500 ft to each side at 455 kHz, water conditions permitting.\u003c\/li\u003e\n\u003cli\u003eSideVü 2 transmits at 500 W RMS and can cover up to 200 ft to each side at 1.0 MHz, water conditions permitting.\u003c\/li\u003e\n\u003cli\u003eTraditional sonar support runs at about 300 kHz with a listed range of 150 ft.\u003c\/li\u003e\n\u003cli\u003eTrue Motion technology works with GPS so scans stay aligned to real position as the boat moves through the scanned area.\u003c\/li\u003e\n\u003cli\u003eAuto, manual, and constant scan modes let the operator match scanning behavior to how the boat is moving and how the area is being fished.\u003c\/li\u003e\n\u003cli\u003eChartplotter controls allow scanning modes, sonar frequencies, and color palettes to be adjusted from the display.\u003c\/li\u003e\n\u003cli\u003eThe kit includes mounting pieces for Spy Pole installation and a side shaft mount for adding a LiveScope transducer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe GT360UHD transducer is installed in a mounting bracket that attaches to the bottom shaft of the Garmin Spy Pole. Cable routing runs through the Spy Pole shaft, which keeps the installation cleaner and reduces exposed cable around the trolling motor area.\u003c\/p\u003e\u003cp\u003eDuring installation, the assembly slides onto the bottom shaft and secures with the included 20 mm bolt. A #2 Phillips screwdriver and 5 mm hex wrench or bit are used in the Spy Pole mounting process. The Spy Pole itself is sold separately, so the vessel should already have that system or be planned for it before ordering this transducer.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThis transducer is meant for use with a compatible Garmin chartplotter. Chartplotter software should be updated when the device is installed, since sonar settings and operation are handled through the display. For boats already running Garmin sonar at the bow, the GT360UHD adds a wider scouting view that can work alongside LiveScope for a more complete picture around the boat.\u003c\/p\u003e\u003cp\u003eThe included LiveScope side shaft mount allows a LiveScope transducer to be mounted to the Spy Pole. When used together, LiveScope live sonar can be overlaid with the OneVü imagery, giving a live window into targets inside the broader scanned area.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis transducer makes the most sense on fishing boats where the bow electronics are used to work structure, edges, brush, docks, grass lines, and open-water targets. The 360-degree view helps when the boat is not directly pointed at the target, and the scan history can reduce the need to rescan the same area repeatedly.\u003c\/p\u003e\u003cp\u003eIt is especially useful for anglers who already rely on a Garmin chartplotter and want a broader survey around the boat before making short casts, repositioning on cover, or following fish that move through the scanned zone.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGT360UHD 12-pin transducer\u003c\/li\u003e\n\u003cli\u003eGT360UHD transducer mount for Spy Pole\u003c\/li\u003e\n\u003cli\u003eLiveScope adjustable perspective shaft mount\u003c\/li\u003e\n\u003cli\u003eDogbone stabilizer\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eDocumentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52715831034037,"sku":"QBP035947","price":999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1340887_qbp035947.webp?v=1781720235","url":"https:\/\/www.qualityboatparts.com\/products\/qbp035947","provider":"Quality Boat Parts","version":"1.0","type":"link"}