{"product_id":"qbp030817","title":"Garmin ECHOMAP Ultra 2 106sv Fishfinder\/Chartplotter Combo, 10 in Touchscreen, LiveScope Plus LVS34, GLS10 Sonar Module, Garmin Navionics+ Mapping","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Garmin 010-02880-10 is a 10-inch ECHOMAP Ultra 2 chartplotter and LiveScope Plus bundle built for anglers who want charts and live-scanning sonar on one helm display. The chartplotter runs on 9 to 18 Vdc (12 V systems) and carries an IPX7 water rating, so it holds up well at the console where spray and quick rinses are part of normal boat life.\u003c\/p\u003e\u003cp\u003eYou get a 1280 x 800 touchscreen display in a housing that measures 295 x 195 x 98 mm (11.6 x 7.7 x 3.9 in.), plus built-in Garmin Navionics+ mapping and two microSD card slots for additional charts and saved data. LiveScope Plus is handled by the included GLS 10 sonar module and LVS34 transducer, with a rated maximum depth\/distance up to 61 m (200 ft.) depending on conditions.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10-inch touchscreen display with 1280 x 800 resolution for clear split-screen chart and sonar layouts.\u003c\/li\u003e\n\u003cli\u003eChartplotter input voltage: 9 to 18 Vdc (typical current draw 2.3 A at 12 Vdc; max 5 A peak).\u003c\/li\u003e\n\u003cli\u003eIPX7 water rating and polycarbonate construction for exposed helm mounting.\u003c\/li\u003e\n\u003cli\u003eTwo microSD card slots with support up to 1 TB card size.\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 port and NMEA 0183 support for tying into common marine sensors and electronics.\u003c\/li\u003e\n\u003cli\u003eGarmin Marine Network port for connecting to the GLS 10 module and sharing data across compatible equipment.\u003c\/li\u003e\n\u003cli\u003eGLS 10 sonar module power input: 10 to 32 Vdc (21 W typical power usage).\u003c\/li\u003e\n\u003cli\u003eLiveScope Plus LVS34 transducer operates from 530 to 1,100 kHz with a 135 degree front-to-back field of view.\u003c\/li\u003e\n\u003cli\u003eWireless sharing with compatible ECHOMAP Ultra 2 or ECHOMAP UHD2 units for user data and sonar.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eECHOMAP Ultra 2 10-inch chartplotter with Garmin Navionics+ mapping\u003c\/li\u003e\n\u003cli\u003eGLS 10 sonar module\u003c\/li\u003e\n\u003cli\u003eLiveScope Plus LVS34 transducer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor a clean helm install, plan for at least 150 mm (5.9 in.) of clearance behind the chartplotter so the connectors and cables are not forced into a tight bend. Power is 9 to 18 Vdc and the chartplotter uses an 8 A fast-blow fuse on the power lead.\u003c\/p\u003e\u003cp\u003eMount the GLS 10 module in a dry, protected area where the network and transducer cables can be routed without sharp edges or constant flex. Leaving unused ports capped and using the supplied ferrite beads near the connectors helps reduce corrosion risk and electrical noise in real-world boat wiring.\u003c\/p\u003e\u003ch6\u003eCompatibility and system integration\u003c\/h6\u003e\u003cp\u003eThe chartplotter includes connections for NMEA 2000, Garmin Marine Network, and a combined power and NMEA 0183 harness. LiveScope Plus data travels from the GLS 10 module to the chartplotter over Garmin Marine Network, so make sure you have the network cabling and routing space to link the black box back to the helm.\u003c\/p\u003e\u003cp\u003eThis bundle focuses on LiveScope, and the display also has a 12-pin transducer port for traditional CHIRP and ClearVü and SideVü sonar when a compatible transducer is installed. If you want those sonar views in addition to LiveScope, plan for the appropriate transducer for your hull and mounting location.\u003c\/p\u003e\u003cp\u003eOn 24 V boats, the GLS 10 can be powered directly (10 to 32 Vdc input), while the chartplotter needs a 12 V feed that stays within its 9 to 18 Vdc input range.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis setup is a good match for bass boats, bay boats, and offshore-capable fishing rigs where you want to scan structure ahead, track fish in real time, and keep charts on the same screen without juggling separate displays. The LVS34 transducer field of view and frequency range work well for following targets and bait movement as you work a shoreline, a reef edge, or a dock line.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the display and exposed cabling with fresh water and let everything dry before covering. Periodically check cable strain relief at the helm and at the GLS 10 module so vibration does not loosen connections over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":52269732823221,"sku":"QBP030817","price":2999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1301111_qbp030817.jpg?v=1771545447","url":"https:\/\/www.qualityboatparts.com\/products\/qbp030817","provider":"Quality Boat Parts","version":"1.0","type":"link"}