{"product_id":"qbp018720","title":"Vimar Eikon 1-Module Interchangeable Rocker Button, Lightable Symbol, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar Eikon is an interchangeable 1-module rocker button cover used to finish the front of compatible Eikon switch or push-button mechanisms.\u003c\/p\u003e\u003cp\u003eIt mounts with a clamp fit and keeps a low profile on the panel. The face is about 22 mm wide and 44.2 mm high, with roughly 6 mm depth, which helps when you are lining up multiple controls in a tight helm console or cabin switch bank. A monitoring window\/light outlet is built into the rocker so indicator or backlighting can shine through when the underlying device supports it.\u003c\/p\u003e\u003cp\u003eThis part is rated IP40, so it is intended for protected interior locations. On boats it is typically installed behind a dash, in the cabin, or inside an enclosed switch panel rather than in areas that take direct spray or washdowns. The rocker itself is thermoplastic, halogen-free, and finished with a matt surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eInterchangeable 1-module rocker button cover for the Vimar Eikon system\u003c\/li\u003e\n\u003cli\u003eClamp mounting onto the compatible Eikon switch or push-button insert\u003c\/li\u003e\n\u003cli\u003eApproximate face size: 22 mm wide by 44.2 mm high, with roughly 6 mm depth\u003c\/li\u003e\n\u003cli\u003eMonitoring window\/light outlet for indicator or backlighting to show through\u003c\/li\u003e\n\u003cli\u003eThermoplastic body that is halogen-free, with a matt surface finish\u003c\/li\u003e\n\u003cli\u003eIP40 protection for sheltered interior panels\u003c\/li\u003e\n\u003cli\u003eColor options aligned to RAL 7024 (Grey), RAL 9022 (Silver), and RAL 9016 (White)\u003c\/li\u003e\n\u003cli\u003eFace style options include a plain rocker or a lightable PRESS marking, depending on the configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis range keeps the same Eikon 1M rocker format while changing the visible finish and the front marking.\u003c\/p\u003e\u003cp\u003eConfigurations vary by color (Grey, Silver, or White) and by symbol style (plain face or a lightable PRESS marking). Dimensions, clamp mounting, and IP40 rating remain consistent across the range.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a control element\/cover plate, not the electrical switching mechanism. It is intended to be used with Vimar Eikon 1-module switch or push-button inserts and the matching Eikon mounting hardware. It is not intended for touch sensor connector use on a bus system, and it does not determine 12V or 24V suitability since voltage is set by the installed mechanism and circuit.\u003c\/p\u003e\u003ch6\u003eInstallation and on-board placement\u003c\/h6\u003e\u003cp\u003eInstall the switch or push-button insert first, then align the rocker and press it into place until the clamp mount engages. If you use a lit symbol or indicator behind the rocker, keep the monitoring window area clean so light can pass through clearly.\u003c\/p\u003e\u003cp\u003eFor marine installs, place it where it stays dry and protected, such as a cabin panel, nav station, or inside an enclosed helm console. If the switch bank is exposed to spray, use a sealed enclosure or a higher ingress-rated front end for that location.\u003c\/p\u003e\u003ch6\u003eWho it suits\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats already built around the Vimar Eikon system where you want consistent rocker styling across lighting and accessory circuits. It also suits installs where a PRESS-marked control that can be found in low light matters, without changing the underlying switch mechanism.\u003c\/p\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eVM20031\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eVM20031.B\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eVM20031.PS.N\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eVM20031.N\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eVM20031.PS\u003c\/span\u003e\n\u003cspan itemprop=\"mpn\" hidden\u003eVM20031.PS.B\u003c\/span\u003e","brand":"Vimar","offers":[{"title":"Simple \/ Grey","offer_id":53771413749941,"sku":"QBP018720-V6","price":5.95,"currency_code":"USD","in_stock":false},{"title":"Simple \/ White","offer_id":53771413782709,"sku":"QBP018720-V8","price":5.95,"currency_code":"USD","in_stock":false},{"title":"PRESS Symbol \/ Silver","offer_id":53771413815477,"sku":"QBP018720-V2","price":9.1,"currency_code":"USD","in_stock":false},{"title":"Simple \/ Silver","offer_id":53771413848245,"sku":"QBP018720-V7","price":7.25,"currency_code":"USD","in_stock":false},{"title":"PRESS Symbol \/ Grey","offer_id":53771413881013,"sku":"QBP018720-V0","price":8.52,"currency_code":"USD","in_stock":false},{"title":"PRESS Symbol \/ White","offer_id":53771413913781,"sku":"QBP018720-V5","price":8.2,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1269151_qbp018720_jpeg.jpg?v=1794649966","url":"https:\/\/www.qualityboatparts.com\/products\/qbp018720","provider":"Quality Boat Parts","version":"1.0","type":"link"}