{"product_id":"qbp015816","title":"Simrad xSonic B150M CHIRP Thru-Hull Transducer, 12 Deg Tilt, 95-155 kHz, 300W, Bronze, 9-Pin, 10m Cable, Depth\/Temp Sensor","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Simrad 000-13921-001 is a thru-hull CHIRP transducer with a bronze housing, a 12° tilted element, a black 9-pin connector, and a 10 m (33 ft) cable.\u003c\/p\u003e\u003cp\u003eIt runs in the Medium CHIRP band from 95 to 155 kHz at 300 W and reports both depth and water temperature. With the 12° housing matched to your hull angle, the sonar beam stays aimed down where it should, which helps with bottom tracking and target separation while you are moving.\u003c\/p\u003e\u003cp\u003eMaximum depth performance is rated to 183 m (600 ft), but real-world readings will vary with installation, speed, water conditions, and bottom type.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMedium CHIRP coverage from 95 to 155 kHz with 60 kHz of bandwidth from a single transducer\u003c\/li\u003e\n\u003cli\u003e300 W power rating for shallow to mid-depth fishing\u003c\/li\u003e\n\u003cli\u003e12° tilted element for hull deadrise angles from 8° to 15°\u003c\/li\u003e\n\u003cli\u003eBronze thru-hull housing intended for fiberglass or wood hulls, with a low-profile form below the waterline\u003c\/li\u003e\n\u003cli\u003eDepth and fast-response water temperature sensing in one fitting\u003c\/li\u003e\n\u003cli\u003eMedium-band beamwidth from 26° to 17° to help separate fish close to structure and in the water column\u003c\/li\u003e\n\u003cli\u003eBlack 9-pin connector and 10 m (33 ft) cable for compatible sonar ports\u003c\/li\u003e\n\u003cli\u003e51 mm (2 in) hole size and 66.5 mm usable shaft length to help plan inside-hull clearance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a single-channel CHIRP transducer, so your display or sounder needs to support CHIRP and the Medium band to get the full benefit. The connection is a black 9-pin plug, so it is important to confirm your unit has a matching 9-pin transducer socket or that you have the correct adapter for your setup.\u003c\/p\u003e\u003cp\u003eThe 12° version is meant for boats with 8° to 15° of deadrise at the mounting point. It is commonly used on stepped, planing, and displacement hulls, and it is sized for vessels up to about 8 m (25 ft) in length.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eAs a thru-hull, it mounts below the waterline and requires a clean spot that stays in solid water flow. Avoid locations behind strakes, through-hulls, or intakes that can feed the transducer aerated water, and check inside the bilge for access before drilling the 51 mm (2 in) hole.\u003c\/p\u003e\u003cp\u003ePlan the cable run before final tightening so the connector can be routed without sharp bends. Leave a little service loop and secure the cable so it cannot chafe from vibration or slap in the bilge.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis transducer makes sense for inshore, coastal, and freshwater fishing where you want coverage and clear returns without stepping up to a larger fairing-block install. It suits skippers who run at speed between spots and still want the bottom to stay readable on the way.\u003c\/p\u003e","brand":"Simrad","offers":[{"title":"Default Title","offer_id":52269722960053,"sku":"QBP015816","price":467.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1299847_qbp015816.jpg?v=1771545403","url":"https:\/\/www.qualityboatparts.com\/products\/qbp015816","provider":"Quality Boat Parts","version":"1.0","type":"link"}