{"title":"Water Sports Mirrors","description":"","products":[{"product_id":"qbp893039","title":"Attwood Marine Clamp-On Ski Mirror, Universal Mount, Fits up to 1\/2 in Window Frames","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 13066-7 is a clamp-on ski mirror with a universal mount for windshield frames up to 1\/2 in. thick. It gives the helm a wider rear view with a curved mirror, which helps when towing a skier, wakeboarder, or tube and when keeping track of traffic behind the boat.\u003c\/p\u003e\u003cp\u003eThis setup works well on boats where drilling into the frame is not preferred. The soft-touch clamps help protect the window frame during installation, while the zinc-plated hardware and powder-coated shaft assembly are better suited to the wet, high-vibration conditions common on ski boats and runabouts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eClamp-on universal mount fits windshield frames up to 1\/2 in. thick\u003c\/li\u003e\n\u003cli\u003eCurved mirror gives a broader rearward view from the helm\u003c\/li\u003e\n\u003cli\u003eSoft-touch mounting clamps help reduce marks on windows and frames\u003c\/li\u003e\n\u003cli\u003eZinc-plated hardware stands up better to moisture than plain steel hardware\u003c\/li\u003e\n\u003cli\u003ePowder-coated shaft assembly adds protection in a marine environment\u003c\/li\u003e\n\u003cli\u003eAdjustable mounting arrangement suits a wide range of windshield layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mirror is intended for boats with a framed windshield or similar mounting point that can accept a clamp. It is a practical fit for many ski boats, bowriders, and runabouts used for towing watersports, especially where the driver wants a clear view aft without changing the windshield frame.\u003c\/p\u003e\u003cp\u003eBefore ordering, the main checkpoint is frame thickness. The clamp is made for window frames up to 1\/2 in. thick, so that measurement matters more than overall boat length or engine size.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward because the mirror clamps into place rather than requiring holes in the frame. The soft-touch contact points help the mount sit securely while being easier on finished surfaces, which is useful on painted or coated windshield frames.\u003c\/p\u003e\u003cp\u003eOnce mounted, the curved glass helps the driver keep a skier or rider in view with fewer body movements at the helm. This makes it a sensible choice for boats that spend time towing family or guests and need a mirror that can be installed quickly and removed when not in use.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52020978811061,"sku":"QBP893039","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329370_qbp893039.jpg?v=1780191615"},{"product_id":"qbp647841","title":"Attwood Marine Perma-Plate Ski Mirror, Universal Mount, 180 Degree Convex, Shatterproof","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 9083-7 is a ski mirror for tow boats and runabouts that need a wider rearward view from the helm. It uses a shatterproof 180 degree convex lens and a compact mirror head that measures 7-5\/16 inches wide by 2-1\/2 inches high, so it adds coverage astern without taking much space at the dash or windshield.\u003c\/p\u003e\u003cp\u003eIts universal mount fits on the dash or on a windshield frame up to 3\/4 inch thick. The mirror head adjusts up, down, and side to side, and the spring-loaded ball joint helps it stay in position when the boat is running through chop and normal vibration.\u003c\/p\u003e\u003cp\u003eThe body is built in chrome-plated ZAMAK with a Perma-Plate chrome finish. That makes it a practical match for open helm stations where spray, sun, and routine wipe-downs are part of normal use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUniversal mount for dash installation or windshield frames up to 3\/4 inch thick\u003c\/li\u003e\n\u003cli\u003eShatterproof 180 degree convex lens for a wider rearward view and fewer blind spots\u003c\/li\u003e\n\u003cli\u003eMirror head adjusts up, down, and side to side to suit different helm positions\u003c\/li\u003e\n\u003cli\u003eSpring-loaded ball joint helps keep the mirror from drifting out of position underway\u003c\/li\u003e\n\u003cli\u003eChrome-plated ZAMAK body with Perma-Plate chrome finish\u003c\/li\u003e\n\u003cli\u003eCompact mirror size of 7-5\/16 inches wide by 2-1\/2 inches high\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mirror works with boats that have enough room at the center of the dash or at the windshield frame for a clear line of sight astern. Windshield mounting is intended for framed windshields up to 3\/4 inch thick. Frameless windshields are not recommended for this installation style.\u003c\/p\u003e\u003cp\u003eOn stepped windshield frames, or on frames under 0.450 inch thick, a spacer may be needed to get the base seated correctly. That is worth checking before drilling or clamping the mirror in place.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFor a dash installation, the base is used as the drilling template and the mount is secured with two #10 x 3\/4 inch stainless steel wood or sheet metal pan-head screws, which are not included. Windshield installation uses the supplied clamping bracket and only needs basic hand tools. In either position, mounting close to the boat centerline gives the driver the cleanest view.\u003c\/p\u003e\u003cp\u003eOnce mounted, the head can be set for driver height and seating position. If more adjustment is needed, the mirror head can be rotated one-half turn and reset.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis mirror is a good match for ski boats, wake boats, and runabouts that tow riders and need a wider glance astern from a seated helm. It also makes sense as a replacement when an older mirror has lost tension or the reflective surface is no longer easy to use.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52581855133877,"sku":"QBP647841","price":37.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329629_qbp647841.webp?v=1780200629"},{"product_id":"qbp436307","title":"Attwood Marine Ski Mirror, Dash or Windshield Mount, 180-Degree Convex, Shatterproof","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Attwood Marine 13055-4 is a ski mirror with a universal mount for dash or windshield installation, built around a shatterproof 180° convex mirror that widens the driver’s rear view. Its compact 7 in. x 3-1\/4 in. size gives you a useful sightline aft without taking over the helm area.\u003c\/p\u003e\u003cp\u003eThis mirror adjusts up and down as well as side to side, then locks in place once you have the viewing angle set. The body is chrome-plated Zamak, and the windshield mount fits frames up to 1 in. thick.\u003c\/p\u003e\u003cp\u003eFor boats used for skiing, wakeboarding, or general towing, this is a straightforward visibility upgrade at the helm. It does not need wiring, network setup, or power, so fitment comes down to having a suitable dash surface or windshield frame near the driver’s position.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e180° convex mirror face opens up the rearward view and helps cut blind spots behind the boat.\u003c\/li\u003e\n\u003cli\u003eUniversal mount can be installed on a dash or on a windshield frame.\u003c\/li\u003e\n\u003cli\u003eFits windshield frames up to 1 in. thick.\u003c\/li\u003e\n\u003cli\u003eFull vertical and side-to-side adjustment lets the driver set the mirror to the helm position.\u003c\/li\u003e\n\u003cli\u003eShatterproof mirror construction suits normal on-board handling and use.\u003c\/li\u003e\n\u003cli\u003eCompact 7 in. x 3-1\/4 in. footprint is easier to place on smaller helms.\u003c\/li\u003e\n\u003cli\u003eChrome-plated Zamak body keeps the mirror light and simple to mount.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mirror works best on ski boats, bowriders, runabouts, and similar layouts where the driver has either a windshield frame or a flat dash area close to the natural line of sight. Before ordering, check that your windshield frame is no more than 1 in. thick or that your dash has enough room for the base and mirror movement.\u003c\/p\u003e\u003cp\u003eBecause the mirror is manually adjustable, it is easy to fine-tune after installation for different drivers or seating positions. That matters on boats where the helm seat height or driver posture changes through the day.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fit for crews who tow skiers or riders and want a clearer aft view from the helm without moving to a larger mirror setup. It also works well on family boats where the driver wants a quick visual check behind the boat while staying forward at the controls.\u003c\/p\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":52581866274997,"sku":"QBP436307","price":32.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1329622_qbp436307.webp?v=1780200916"}],"url":"https:\/\/www.qualityboatparts.com\/collections\/water-sports-mirrors.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}