{"title":"Vimar","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","products":[{"product_id":"qbp136614","title":"Vimar Flush-Mount Hollow Wall Mounting Box, 4-Module, 50mm Deep, Light Blue, Glow Wire 850C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71704 is a 4-module flush-mount box for hollow walls that clamps into thin panels and supports up to four modular electrical fittings. The box body measures 133.8 mm x 72.5 mm with 50 mm internal depth, and the wall cutout is prepared with a 68 mm hole cutter.\u003c\/p\u003e\u003cp\u003eIt is made from halogen-free plastic with a glow-wire rating of 850 C and an IP00 protection rating, so it belongs behind a finished plate and in protected interior locations. Break-out feed-through openings are provided around the sides and rear, with retention knockouts shaped for conduit in 16 mm, 20 mm, or 25 mm sizes and a total of 14 possible inlets.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-module hollow-wall box for mounting up to four electrical fittings\u003c\/li\u003e\n\u003cli\u003eMetal fins clamp securely to walls with thickness from 1 to 38 mm\u003c\/li\u003e\n\u003cli\u003eOverall size 133.8 mm x 72.5 mm with 50 mm internal depth\u003c\/li\u003e\n\u003cli\u003e68 mm hole-cutter preparation with a hole-centring plate on the back to help line up the cutout\u003c\/li\u003e\n\u003cli\u003eBreak-out cable entries and rear inlet; retention knockouts for 16 mm, 20 mm, or 25 mm conduit; 14 inlets total\u003c\/li\u003e\n\u003cli\u003eMetal fixing lugs for device support screws\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body with glow-wire rating of 850 C; IP00 (non-sealed)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for hollow constructions such as plasterboard, wood, and laminate-type panels, which is common when fitting switches and sockets into interior liners, bulkheads, and furniture faces. Confirm your front-end hardware is built around Vimar 4-module frames and the matching cover plates for the finish you want.\u003c\/p\u003e\u003cp\u003eThe enclosure is not sealed and does not provide spray protection on its own, so it should be kept away from exposed cockpit and deck areas unless it sits inside a separate protected housing.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eCut the opening with a 68 mm hole saw, feed cables or conduit through the chosen break-outs, and slide the box into the panel. Tightening the clamps pulls the metal fins against the back of the wall to lock the box in place across a wide range of panel thicknesses.\u003c\/p\u003e\u003cp\u003eDevice mounting screws land on metal lugs inside the box. A matching 4-module flat cover is available for closing the opening during build-out (V71634).\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis box fits clean electrical refits where you are adding Vimar modular switches or outlets to cabins, salons, or helm-side interior panels and want a serviceable backbox with multiple entry points. It also helps when you are routing conduit behind liners and need a box that accepts 16 mm, 20 mm, or 25 mm conduit without forcing oversized openings.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268840779957,"sku":"QBP136614","price":7.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297875_qbp136614.jpg?v=1771540406"},{"product_id":"qbp189009","title":"Vimar Eikon Push Button Mechanism, For 1-3 Module Button, 1P NO, 10A 250V~, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20008.0 is a 1-pole, normally-open (momentary) push-button mechanism rated 10 A at 250 V~ and built to accept an optional locator\/indicator light. It is a 1-module device meant for flush mounting, so it sits cleanly in a console, cabin bulkhead panel, or electrical backbox where you want a push action that returns when released.\u003c\/p\u003e\u003cp\u003eThis mechanism measures 22.3 mm wide, 49.0 mm high, and 34.6 mm deep, and it carries an IP40 protection rating for protected interior locations. The body is thermoplastic and halogen-free, with a matt anthracite finish (similar to RAL 7024) and a small label area for circuit identification.\u003c\/p\u003e\u003cp\u003eIt is supplied as the mechanism only and is intended to be completed with a compatible 1-, 2-, or 3-module button from the same system, depending on the plate layout you are building.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1P NO momentary push-button action for control functions that should not latch on\u003c\/li\u003e\n\u003cli\u003eElectrical rating: 10 A at 250 V~\u003c\/li\u003e\n\u003cli\u003eLightable mechanism for use with compatible illuminated button\/lighting accessories\u003c\/li\u003e\n\u003cli\u003e1-module format with flush-mount installation and engage (snap) fastening\u003c\/li\u003e\n\u003cli\u003eIP40 protection for dry, protected interior panels and enclosures\u003c\/li\u003e\n\u003cli\u003eThermoplastic, halogen-free construction with matt anthracite finish (similar to RAL 7024)\u003c\/li\u003e\n\u003cli\u003eCompact body: 22.3 mm (W) x 49.0 mm (H) x 34.6 mm (D)\u003c\/li\u003e\n\u003cli\u003eLabel space\/information surface for clear circuit marking at the panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the mounting depth before you cut the panel or select the backbox, since the mechanism body is 34.6 mm deep. It is designed to snap into a compatible modular support, then be finished with the correct button and cover plate for your Eikon layout. Once installed, keep the labeling area visible so the function is obvious at a glance at the helm or inside the cabin.\u003c\/p\u003e\u003cp\u003eFor marine wiring, treat it like any other interior switching device: keep it out of direct spray, route conductors with strain relief, and use proper protection upstream for the circuit you are controlling. This type of momentary contact is commonly used to trigger relays, contactors, horns, or control inputs where you want a deliberate press-and-release action.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an Eikon-format mechanism intended to be paired with a matching 1-, 2-, or 3-module button, depending on the button style and the plate configuration. The IP40 rating makes it a better match for cabin and console interiors than exposed cockpit locations, unless it is installed inside a suitable protective enclosure.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt suits boats that use modular wall-plate style controls and want a clean momentary push point for functions such as a signal, reset, or a relay-driven load. It is also a good match when you want the option of a lighted button position for low-light operation in cabins or inside a covered helm console.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268851495093,"sku":"QBP189009","price":15.17,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298032_qbp189009.jpg?v=1771540455"},{"product_id":"qbp190179","title":"Vimar Eikon 1-Module Panel Mounting Frame, With Screws, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20626 is a 1-module mounting frame with fixing screws for panel mounting in the Eikon modular system. It supports one module and can be installed in either a horizontal or vertical orientation, which helps when you are laying out switches and outlets on a helm console, cabin bulkhead, or an electrical accessory panel.\u003c\/p\u003e\u003cp\u003eThis is a flush-mounted holder style frame made from thermoplastic, and it mounts from the front side. Because it does not include a built-in installation box, plan for a proper panel cut-out and enough clearance behind the panel for wiring and the device you are installing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module frame for panel mounting in the Vimar Eikon range\u003c\/li\u003e\n\u003cli\u003eSupports horizontal or vertical mounting orientation for flexible panel layouts\u003c\/li\u003e\n\u003cli\u003eFront-side mounting with screw fixing for a secure install on flat panels\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction for electrical insulation around the module support\u003c\/li\u003e\n\u003cli\u003eNo built-in installation box, leaving you free to manage wiring space behind the panel\u003c\/li\u003e\n\u003cli\u003eNot intended for 60 mm round junction boxes, floor boxes, wall ducts, or 35 mm DIN rail mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module panel-mounting frame\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is meant for Vimar Eikon modular domestic switching devices that mount into a panel rather than a standard in-wall box. Match it with the correct 1-module Eikon insert and cover plate for your layout, and verify your panel thickness and rear clearance before cutting.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePosition the frame in the panel opening, fasten it with the supplied screws, then mount the chosen module from the front side per the device’s instructions before fitting the cover plate. On a boat, it helps to mount it on a rigid surface that will not flex with vibration, and to keep the installation in a protected location unless the module and cover plate you are using are suited to spray and washdowns.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis part is a good match for refits and new builds using Vimar Eikon modules for cabin lighting control, service outlets, or accessory panels where you want a clean, serviceable front-side install. It is also useful when you are building custom panels and need a consistent way to mount single-module devices without committing to a full electrical box behind the surface.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268852347061,"sku":"QBP190179","price":3.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298036_qbp190179.jpg?v=1771540458"},{"product_id":"qbp190266","title":"Vimar Eikon 2-Module Panel-Mount Frame, With Screws, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20627 is a 2-module Eikon mounting frame for panel mounting, supplied with fixing screws. It sits behind a 2-module Eikon round or square cover plate and gives you a solid base to mount Eikon device modules on a switch panel, bulkhead, or console. The frame measures about 135 x 34.6 mm and is made from thermoplastic.\u003c\/p\u003e\u003cp\u003eOn board, this is the small part that keeps a Vimar Eikon outlet, switch, or charger module properly aligned in a cutout so the finished plate sits clean and tight. It can be mounted horizontally or vertically, depending on how the cover plate is oriented.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module panel-mount frame for Vimar Eikon device modules and 2-module Eikon round and square cover plates\u003c\/li\u003e\n\u003cli\u003eSupplied with fixing screws; modules mount from the front side\u003c\/li\u003e\n\u003cli\u003eSupports both horizontal and vertical mounting direction\u003c\/li\u003e\n\u003cli\u003eThermoplastic body with a honeycomb structure that adds stiffness without adding much weight\u003c\/li\u003e\n\u003cli\u003eBuilt for flush-mounted installations; no built-in installation box\u003c\/li\u003e\n\u003cli\u003eNot suitable for 60 mm round junction boxes, wall duct installations, DIN-rail (35 mm) mounting, or floor boxes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module mounting frame\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is for the Vimar Eikon system in a 2-module format. Confirm your cover plate is an Eikon 2-module plate (round or square style) and that your panel cutout and backside clearance match the device modules you are installing. The frame is intended for panel mounting rather than standard 60 mm round wall boxes.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePosition the frame in the panel opening, align it for the final plate orientation, and secure it using the supplied screws. Once the frame is fixed, install the Eikon modules from the front side and finish with the matching cover plate.\u003c\/p\u003e\u003cp\u003eFor thin fiberglass or composite panels, it helps to use a backing plate or threaded inserts so the screws stay tight under vibration. Leave enough wiring slack for service, and strain-relieve cables so the module terminals are not carrying load.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is commonly used when building or refreshing a helm switch panel, adding a cabin charging point, or cleaning up a loose-fitting Eikon install where the modules need better support behind the plate.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter the first few trips, recheck screw tightness. If the panel area gets salt spray, a quick wipe-down during routine cleaning helps keep hardware and surrounding finishes looking good.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268852904117,"sku":"QBP190266","price":13.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298040_qbp190266.jpg?v=1771540460"},{"product_id":"qbp185230","title":"Vimar Exé 3-Module Flush Mounting Box, For Hollow Walls, GW 960C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71793 is a 3-module flush mounting box with a plaster frame for installing Exé flush-wall cover plates on hollow walls. It uses a glow-wire tested plastic body (GW 960°C) and provides up to 58.65 mm of usable depth for wiring and device bodies behind the finished panel.\u003c\/p\u003e\u003cp\u003eOn boats this style of box is commonly used behind cabin liners, bulkhead panels, or helm and nav station surfaces where you have a cavity rather than a solid wall. The rectangular plaster frame helps the finished Exé plate sit flush, which keeps the install tidy in visible interior areas.\u003c\/p\u003e\u003cp\u003eThis box is rated IP00, so it is intended for dry, protected locations behind a finished surface, not for exposed areas that see spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module box for Exé flush-wall plates in hollow wall installations\u003c\/li\u003e\n\u003cli\u003eGlow-wire tested to 960°C for better resistance to heat from wiring faults\u003c\/li\u003e\n\u003cli\u003eAccepts 20 mm or 25 mm conduit; cable entry through break-out openings\u003c\/li\u003e\n\u003cli\u003eRear-entry layout with 12 inlets for routing feeds and loops in a panel cavity\u003c\/li\u003e\n\u003cli\u003eUp to 58.65 mm depth to accommodate wiring and the back of installed devices\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body (blue) with an untreated surface finish\u003c\/li\u003e\n\u003cli\u003eCouplable format for aligned multi-gang installations\u003c\/li\u003e\n\u003cli\u003eIP00 enclosure rating, so it needs a dry, protected mounting position\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the cut-out based on the Exé flush-wall layout, then set the plaster frame flush with the finished surface so the cover plate sits level. Leave enough cavity space behind the panel for the device depth plus room to route conductors without tight bends.\u003c\/p\u003e\u003cp\u003eConduit entries are made by knocking out the required openings and bringing in 20 mm or 25 mm tube from the rear. Switching equipment is fixed by screw mounting, which helps keep inserts stable when panels see vibration under way.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is sized for three Vimar modules and is intended for Exé flush-wall cover plates. If you are mixing ranges, confirm that the module format and plate system match the Exé flush-wall style before cutting the panel.\u003c\/p\u003e\u003cp\u003eThe overall footprint is 230 mm by 192 mm, which is useful for checking clearance behind trim rings, console reinforcements, and nearby hardware.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt fits interior switch and outlet points where you want the plate to sit flush, such as cabin bulkheads, a galley panel, or a nav station switch bank. It also works well in refits where surface boxes are being replaced with a flush-wall finish in dry living spaces.\u003c\/p\u003e\u003ch6\u003eMaintenance and checks\u003c\/h6\u003e\u003cp\u003eAfter the first few trips, re-check device fixing screws and cable supports, especially on fast powerboats where panels see more vibration. Keep the cavity dry and route conductors so they cannot chafe on cut edges or at break-out points.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268854542517,"sku":"QBP185230","price":106.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298012_qbp185230.jpg?v=1771540463"},{"product_id":"qbp186144","title":"Vimar Eikon 2-Module Mounting Frame, Without Screws, For 60 mm Fixing Centres or 56x56 mm Box, 71 mm Distance Between Centres","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM21603 is a 2-module Eikon mounting frame that holds modular switching devices neatly in a flush installation, so your finished plate sits straight and the modules stay supported when the boat is underway.\u003c\/p\u003e\u003cp\u003eIt suits setups built around 60 mm fixing centres or a 56 x 56 mm mounting box, and it is modular with a 71 mm distance between centres for lining up multiple frames in series.\u003c\/p\u003e\u003cp\u003eThe frame is made from thermoplastic with an untreated surface, and the honeycomb structure adds stiffness where it matters behind the plate.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module support for Vimar Eikon modular devices, with the inserts mounted from the front.\u003c\/li\u003e\n\u003cli\u003eFlush-mount support that can be installed in horizontal or vertical direction to match the panel layout.\u003c\/li\u003e\n\u003cli\u003eFits 60 mm fixing centres or a 56 x 56 mm mounting box, with 71 mm centre spacing for ganged installations.\u003c\/li\u003e\n\u003cli\u003eCorner slots for panel fixing and central slots that help you level the support before final tightening.\u003c\/li\u003e\n\u003cli\u003eHooking teeth make it easier to link frames in series for multi-position switch banks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this frame when your installation is based on Vimar Eikon supports and you need a 2-module position for switches, outlets, or other Eikon inserts. Before ordering, confirm the box type and fixing-centre spacing in the mounting location, especially on refits where the existing box standard may vary.\u003c\/p\u003e\u003cp\u003eThis is the support behind the cover plate, not a complete enclosure. Any sealing against spray or washdown depends on the box, plate, and gasket approach used in your assembly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSecure the frame to the box or panel using the slotted fixing points, then use the central slots to keep it level so the plate sits flat. After the support is fixed, fit the Eikon modules from the front and finish with the matching cover plate.\u003c\/p\u003e\u003cp\u003eFor a longer switch run at the helm, nav station, or a utility panel, the 71 mm modular spacing helps keep multiple frames aligned so the final row looks even.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis frame is a good match when you are standardizing on Vimar Eikon hardware for control points around the boat, such as a compact two-module position in the cabin, a small control group at the nav station, or an accessory panel in the cockpit.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eIn vibration-prone areas, it is worth re-checking fasteners after the first few trips. If the surrounding panel is exposed to salt spray, rinse the area during routine cleaning and keep the protection focus on the cover plate and box assembly.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268855263413,"sku":"QBP186144","price":3.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298016_qbp186144.jpg?v=1771540466"},{"product_id":"qbp186558","title":"Vimar Eikon 2-Central-Module Mounting Frame, With Screws, For 60 mm Centers or 56x56 mm Boxes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM21612 is a 2-central-module mounting frame with fixing screws for Vimar Eikon modular wiring devices in a flush-mounted installation.\u003c\/p\u003e\u003cp\u003eIt mounts to a 3-module mounting frame and to boxes with 60 mm fixing centres or a 56x56 mm mounting box. Module inserts fit from the front, and the frame can be installed horizontally or vertically (2 modules across, or 1 module when mounted vertically).\u003c\/p\u003e\u003cp\u003eThis is the support frame only, not a back box. It is not suitable for 60 mm round junction boxes, floor boxes, wall duct systems, or 35 mm DIN-rail mounting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-central-module mounting frame with screws for Vimar Eikon modular devices\u003c\/li\u003e\n\u003cli\u003eFits a 3-module mounting frame and boxes with 60 mm fixing centres or a 56x56 mm mounting box\u003c\/li\u003e\n\u003cli\u003eFront-side module insertion for easier alignment and access during wiring\u003c\/li\u003e\n\u003cli\u003eInstalls horizontally or vertically (2 modules horizontal, 1 module vertical)\u003c\/li\u003e\n\u003cli\u003eThermoplastic frame for flush-mounted installations\u003c\/li\u003e\n\u003cli\u003eNot suitable for 60 mm round junction boxes, floor boxes, wall duct systems, or 35 mm DIN-rail mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is for rectangular box installations that use 60 mm fixing centres or a 56x56 mm mounting box, and for setups that use a 3-module mounting frame but need a 2-central-module support. Confirm the box type and fixing-centre spacing before ordering, since it does not fit standard 60 mm round junction boxes.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFix the frame to the box using the supplied screws, then mount the Eikon modules from the front side in the required orientation. Once devices are secured and lined up, the matching cover plate can be fitted to finish the installation.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis frame is a good match for boats already using the Vimar Eikon modular system in interior panels and bulkheads, where a clean flush fit matters and the mounting box matches the 60 mm fixing-centre or 56x56 mm format. It is a poor fit for refits built around 60 mm round boxes or DIN-rail enclosures.\u003c\/p\u003e\u003cp\u003eIn areas exposed to spray or washdowns, plan the installation inside a protected panel or enclosure and use cover plates and sealing methods suited to that location.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268856737973,"sku":"QBP186558","price":9.02,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298020_qbp186558.jpg?v=1771540469"},{"product_id":"qbp186659","title":"Vimar Eikon Mounting Frame, For V71320\/V71620\/V71720 Flush or 09920 Surface Boxes, 14 (7+7) Modules, Screws Included","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20620 is a 14 (7+7)-module mounting frame with fixing screws for V71320, V71620 and V71720 flush mounting boxes, and the 09920 surface mounting box.\u003c\/p\u003e\u003cp\u003eIt is the support that holds the modular devices in position behind the cover plate, keeping everything lined up so a switch bank looks clean and stays easy to use on board. The frame can be mounted horizontally or vertically, and the modules fit from the front side which helps during wiring and later service work.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e14 (7+7)-module format for building larger Eikon device layouts in one opening\u003c\/li\u003e\n\u003cli\u003eFits V71320, V71620 and V71720 flush boxes, and the 09920 surface mounting box\u003c\/li\u003e\n\u003cli\u003eSupplied with fixing screws for securing the frame to the box\u003c\/li\u003e\n\u003cli\u003eSupports horizontal or vertical orientation to match panel layout and available bulkhead space\u003c\/li\u003e\n\u003cli\u003eFront-side module fitting, so devices can be installed and serviced without pulling the box out of the wall\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e14 (7+7)-module mounting frame\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a mechanical mounting frame, so electrical ratings depend on the modules you install in it. Plan the build as a complete set: the correct mounting box (one of the references listed above), the modular devices, and the matching cover plate for the finished look.\u003c\/p\u003e\u003cp\u003eIf your boat has a different box format or you are working with DIN rail enclosures, wall duct systems, or floor boxes, this is not the right part for that installation.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSecure the frame to the mounting box using the supplied screws, then fit the modules from the front and finish with the appropriate cover plate. On boats, leave enough conductor slack so vibration does not pull on terminals, and keep the wiring dressed so it does not press hard against the backs of the modules.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis format is commonly used for grouped switching where you want one tidy bank, such as cabin entry lighting, galley services, a nav station switch area, or an equipment cabinet panel. It is also a practical choice on refits when you are standardizing multiple zones to the same 14-module layout.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter the first few trips, it is worth re-checking the fixing screws if the panel sees regular vibration and tightening as needed. Keep washdown water out of the box opening during cleaning, since the mounting frame itself does not create a seal.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268857688245,"sku":"QBP186659","price":13.02,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298024_qbp186659.jpg?v=1771540472"},{"product_id":"qbp186695","title":"Vimar Eikon 5-Module Mounting Frame, For British Standard Boxes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20609 is a 5-module mounting frame for British Standard mounting boxes, used to secure Vimar Eikon modules neatly behind a matching cover plate.\u003c\/p\u003e\u003cp\u003eIt screws to the box to keep switches, outlets, dimmers, and other Eikon modules aligned and sitting flush. On a boat, it is the kind of small hardware that makes a helm panel, nav station, or cabin switch bank feel finished and easier to service later.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e5-module frame for British Standard (BS) rectangular mounting boxes\u003c\/li\u003e\n\u003cli\u003eMade for Vimar Eikon modular devices and BS-format cover plates that use a 5-module opening\u003c\/li\u003e\n\u003cli\u003eScrew-mounted installation; mounting screws included\u003c\/li\u003e\n\u003cli\u003eCan be installed in horizontal or vertical orientation to suit the layout on the bulkhead\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 14.4 x 8.3 x 1.5 cm\u003c\/li\u003e\n\u003cli\u003eMechanical mounting support only; it does not add switching, protection, or sealing by itself\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e5-module mounting frame\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is intended for British Standard mounting boxes and a 5-module Eikon layout. Before ordering, confirm your back box is the BS type and that your cover plate is the 5-module BS format that matches the Eikon system you are using.\u003c\/p\u003e\u003cp\u003eIt is not meant for round junction boxes, floor boxes, wall duct systems, or DIN-rail 35 mm mounting.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the BS back box firmly in the panel or bulkhead, then position the frame and tighten the screws until the frame sits flat. Fit the Eikon modules into the frame from the front, wire them per the device instructions, and finish with the matching cover plate.\u003c\/p\u003e\u003cp\u003eIn marine installations where vibration is normal, it helps to re-check screw tightness after the first few outings, especially on panels near engines or high-traffic areas.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats that already use Vimar Eikon switchgear and want a tidy 5-module group in one location, such as a cabin light bank, a galley outlet panel, or a nav station accessory panel. For exposed areas, plan the enclosure and cover plate for the level of splash protection you need, since the frame itself is just the mounting support.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268859031733,"sku":"QBP186695","price":16.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298028_qbp186695.jpg?v=1771540475"},{"product_id":"qbp180965","title":"Vimar Eikon 2-Way Switch Mechanism, 1P, 16AX, 250V, Lightable, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20005.0 is a 1-pole 16 AX two-way switch mechanism rated 250 V~ that can be fitted with optional illumination for finding the switch in low light.\u003c\/p\u003e\u003cp\u003eIt is commonly used for lighting circuits where you want control from two locations, such as a companionway light that can be switched from both the entry and the cabin.\u003c\/p\u003e\u003cp\u003eThe body occupies 1 module and is completed with the matching Eikon rocker\/button and cover plate. Overall size is 22.3 mm wide by 49.0 mm high, with a 25.0 mm built-in depth.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e16 AX switching rating at 250 V~ for many onboard AC lighting and general loads\u003c\/li\u003e\n\u003cli\u003eTwo-way (SPDT) mechanism for single-point switching or two-location control when paired in a circuit\u003c\/li\u003e\n\u003cli\u003eOptional illumination with a replaceable LED lamp for orientation\/control lighting\u003c\/li\u003e\n\u003cli\u003e1-module format for Vimar Eikon modular frames and cover plates\u003c\/li\u003e\n\u003cli\u003eScrew terminals for a secure connection when panels see vibration\u003c\/li\u003e\n\u003cli\u003eSuitable degree of protection IP40 in its intended installed configuration\u003c\/li\u003e\n\u003cli\u003eRated up to 200 W with self-ballasted lamps\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mechanism is for Vimar Eikon modular frames and plates. It snaps into the frame, and the wiring lands on screw terminals, so leave enough space behind the panel to route conductors without putting strain on the connections.\u003c\/p\u003e\u003cp\u003eBecause the mechanism is listed as suitable for IP40, it belongs in protected locations such as the cabin, nav station, or inside a sheltered helm panel. For areas exposed to spray or washdowns, mount it behind a weather-protected panel or inside an enclosure that provides the protection level you need.\u003c\/p\u003e\u003ch6\u003eElectrical and lighting notes\u003c\/h6\u003e\u003cp\u003eUse it on AC circuits within its 250 V~ rating and size the upstream breaker or fuse to the load and your wiring. The 16 AX rating covers many lighting applications where inrush current matters.\u003c\/p\u003e\u003cp\u003eIf you want the switch to light up, it supports a replaceable LED lamp for orientation\/control lighting. Match the lamp to your system voltage and the indicator style you want on the panel.\u003c\/p\u003e\u003ch6\u003eMaterials and finish\u003c\/h6\u003e\u003cp\u003eThe housing is halogen-free thermoplastic with a matte anthracite gray finish similar to RAL 7024, which suits gray Eikon rockers and plates on modern switch panels.\u003c\/p\u003e\u003ch6\u003eOn-board use\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits and new builds that standardize on Vimar Eikon modules across a helm or cabin switch bank and want the same feel and layout from position to position.\u003c\/p\u003e\u003ch6\u003eMaintenance\u003c\/h6\u003e\u003cp\u003eAfter the first few outings, recheck terminal tightness and wire support, especially if the panel sees vibration. Clean with a soft cloth and mild soap and avoid solvents that can haze plastic parts.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268860539061,"sku":"QBP180965","price":19.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298008_qbp180965.jpg?v=1771540481"},{"product_id":"qbp179696","title":"Vimar Isoset 8-Module 2x4 Surface Mount Enclosure, For Eikon and Plana Series, IP40, 23.8x8.3x5.5 cm, Plastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14814 is an IP40 surface mounting box that supports an 8-module (2+2+2+2) layout for Vimar Eikon and Plana devices.\u003c\/p\u003e\u003cp\u003eIt is a grey plastic enclosure meant for protected, dry locations on board where surface mounting makes more sense than cutting into a bulkhead or console. IP40 suits interior areas that stay out of spray and washdowns.\u003c\/p\u003e\u003cp\u003eThe box can be installed horizontally or vertically, then finished with the appropriate Eikon or Plana mechanisms and cover plate to match the 8-module format.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8-module surface enclosure (2+2+2+2) for Vimar Eikon and Plana series devices\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for sheltered interior mounting\u003c\/li\u003e\n\u003cli\u003eHorizontal or vertical installation to match your panel layout\u003c\/li\u003e\n\u003cli\u003ePlastic body with insulating construction for surface-mount switchgear and controls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mounting box is for installations built around the Vimar Eikon and Plana modular system, sized specifically for an 8-module arrangement. Confirm the total module count of your planned device combination so it fills the enclosure correctly.\u003c\/p\u003e\u003cp\u003eIf your existing hardware is from a different Vimar family, verify series compatibility before ordering, since cover plates and mechanisms are series-specific.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDry-fit the enclosure on the bulkhead or console first so cable routing and device placement are clear. After the box is secured, install the mechanisms, complete wiring terminations, and finish with the matching 8-module cover plate.\u003c\/p\u003e\u003cp\u003eFor marine use, keep the mounting position away from direct weather, deck wash, and any area that routinely sees dripping gear or hose-downs.\u003c\/p\u003e\u003ch6\u003eWhere it works well on board\u003c\/h6\u003e\u003cp\u003eThis style of surface enclosure is a solid match for refits and tight-access panels where there is limited clearance behind the mounting surface. It suits cabins, nav stations, internal consoles, and other sheltered spaces where you still want a clean, serviceable control point.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a damp cloth and mild cleaner. Avoid harsh solvents that can haze plastic, and recheck mounting screws after the first few trips if the box is installed in a spot that sees vibration.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268860899509,"sku":"QBP179696","price":14.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297997_qbp179696.jpg?v=1771540487"},{"product_id":"qbp179934","title":"Vimar Eikon 1-Way Switch Mechanism, 16AX 250V, Lightable, Anthracite, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20001.0 is a 1-way (single pole) switch mechanism rated 16 AX, 250 V~ with optional illumination, sized for flush mounting and finished in anthracite (RAL 7024) with a matte surface. It snaps into place as a modular domestic switching device and uses screwed terminals for the wiring connections.\u003c\/p\u003e\u003cp\u003eThis is the internal switching mechanism that gets completed with a compatible Eikon button in 1-, 2-, or 3-module formats, depending on the look and layout of your switch position. The 16AX rating is intended for switching loads with higher inrush, and the mechanism is specified up to 200 W for self-ballasted lamps.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-pole, 1-way switch mechanism rated 16 AX, 250 V~ (16 A).\u003c\/li\u003e\n\u003cli\u003eOptional illumination for control and orientation with an exchangeable LED element.\u003c\/li\u003e\n\u003cli\u003eBuilt to complete with 1-, 2-, or 3-module button styles in the Eikon modular system.\u003c\/li\u003e\n\u003cli\u003eFlush-mounted installation with engage (snap) fastening and no mounting plate.\u003c\/li\u003e\n\u003cli\u003eScrewed terminal connections for secure conductor clamping in vibrating environments.\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that is halogen-free; IP40 for protected interior locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mechanism is part of the Eikon modular device format (1 module) and is meant to be paired with the appropriate Eikon button and faceplate system used on many yachts and European-style interiors. The device body measures 22.30 mm wide by 49.00 mm high, with an overall depth of 34.60 mm and a built-in depth of 25.00 mm, which helps when checking clearance behind a bulkhead panel or inside a helm console.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eIt is intended for flush mounting and uses snap fastening, which is handy when assembling multi-gang stations in a cabin or at the helm. Wiring lands on screwed terminals, so take the time to prep conductors cleanly, keep strands contained, and leave enough service loop to avoid tension on the terminals once the button and plate are fitted.\u003c\/p\u003e\u003cp\u003eBecause the protection rating is IP40, plan the mounting position for areas kept out of direct spray and washdowns. In spots that see moisture or routine deck cleaning, place it behind a suitable protective panel or enclosure so the mechanism stays dry.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis type of 1-way switch is commonly used where you want simple on and off control from a single location, such as switching an interior lighting circuit, controlling a ventilation feed, or operating a relay or contactor coil in an AC panel layout. The optional illumination is useful for finding the switch at night without lighting up the whole cabin.\u003c\/p\u003e\u003cp\u003eIt is a good match for boat owners and builders who are already using the Eikon modular ecosystem and want a consistent look across cabins, salons, and helm stations while keeping electrical hardware standardized.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically check that the faceplate is seated properly and that there is no movement at the switch position from vibration. If the illumination is used, the LED element is exchangeable, which makes it straightforward to refresh the locator light later without replacing the entire mechanism.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268860932277,"sku":"QBP179934","price":15.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298004_qbp179934.jpg?v=1771540489"},{"product_id":"qbp199814","title":"Vimar Eikon\/Arké\/Plana DIN Rail Mounting Frame, 1M, TH35, RAL 7035, Isolating Lining","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV51921 is a 1-module mounting frame that fastens to a 35 mm TH35 DIN rail (DIN 60715) so you can install Vimar Eikon, Arké, or Plana devices inside a switchboard or control enclosure.\u003c\/p\u003e\u003cp\u003eIt occupies 1.5 standard DIN modules (17.5 mm per module), comes in RAL 7035 grey, and includes an isolating lining that adds a protective barrier between the mounted device and surrounding metalwork in a panel.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 35 mm top-hat DIN rail (TH35) layouts used in distribution boards and control enclosures\u003c\/li\u003e\n\u003cli\u003eMounting support for one Vimar Eikon, Arké, or Plana device module on a DIN rail\u003c\/li\u003e\n\u003cli\u003eOccupies 1.5 DIN modules (17.5 mm per module), useful for planning rail space in compact panels\u003c\/li\u003e\n\u003cli\u003eRAL 7035 grey finish that blends with common switchboard components\u003c\/li\u003e\n\u003cli\u003eSupplied with an isolating lining (protection diaphragm) for a cleaner, more separated install in metal enclosures\u003c\/li\u003e\n\u003cli\u003eStraight DIN-rail adapter profile with a plastic body, so there is no rust to deal with inside the panel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is for DIN-rail mounting inside an enclosure and is intended for Vimar devices in the Eikon, Arké, and Plana ranges. Confirm the series of the device you plan to mount, and allow for the 1.5-module footprint when laying out breakers, terminals, and wiring duct on the rail.\u003c\/p\u003e\u003cp\u003eIt uses the standard 35 mm top-hat rail format, so it matches the rails found in many AC and DC distribution panels and small control boxes on board.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the frame on the DIN rail inside the panel, then fit the chosen device module into the support as required by that series. Leave clearance for wire bends and for service access, since cramped enclosures can make later troubleshooting harder than it needs to be.\u003c\/p\u003e\u003cp\u003eOn boats, it is typically mounted behind a panel door or inside a sealed electrical box to keep salt deposits and spray away from the electrical system.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical part for building a tidy DIN-rail section at a nav station, in a machinery-space control box, or inside a DC distribution locker where you want a single Eikon, Arké, or Plana module to sit alongside breakers and other DIN components.\u003c\/p\u003e\u003cp\u003eIt suits installers who are standardizing on Vimar device modules and need a compact way to integrate one function into a DIN-rail switchboard layout without giving up more rail space than necessary.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268860997813,"sku":"QBP199814","price":6.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298063_qbp199814.jpg?v=1771540492"},{"product_id":"qbp199966","title":"Vimar Isoset 2-Module Surface Enclosure, For Eikon and Plana, IP40, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14802 is a 2-module surface-mount enclosure for Vimar Eikon and Plana modular devices when you need a neat installation on top of a bulkhead, liner, or panel. It is rated IP40, meaning it helps keep out solid objects down to 1 mm but it does not provide water protection, so it belongs in dry interior locations. Overall size is 6.8 x 8.3 x 5.5 cm, which is handy when you are checking clearance around cabinetry, behind trims, or inside a protected console.\u003c\/p\u003e\u003cp\u003eThe housing is plastic and includes full insulating materials, which supports safe separation between the device and the mounting surface. The enclosure is finished in grey and keeps the install tidy when you are surface-mounting where a flush wall box is not practical.\u003c\/p\u003e\u003cp\u003eOn boats this style of enclosure is commonly used for switch points and small accessory outlets in cabins, at the nav station, or inside sheltered helm areas where the wiring run is surface-routed and you want a clean, enclosed termination.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module surface enclosure sized for Vimar Eikon and Plana modular devices\u003c\/li\u003e\n\u003cli\u003eIP40 protection for interior spaces: protection against solid objects with no water ingress rating\u003c\/li\u003e\n\u003cli\u003eCompact external dimensions: 6.8 x 8.3 x 5.5 cm\u003c\/li\u003e\n\u003cli\u003ePlastic housing with full insulating materials for safer mounting on insulated panels\u003c\/li\u003e\n\u003cli\u003eGrey finish suited to low-visibility interior installations\u003c\/li\u003e\n\u003cli\u003eLightweight enclosure at 58.07 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is intended for Vimar modular installations that use a 2-module format in the Eikon and Plana ranges. Confirm your device and support frame are the 2-module size before ordering, especially if your boat mixes different Vimar series in different areas.\u003c\/p\u003e\u003cp\u003eIf you are replacing an existing box, check both the module count and the available wall space around the faceplate. The 5.5 cm depth is the key measurement to verify when mounting over conduits, cable bundles, or structural stiffeners.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the enclosure to a flat surface with fasteners appropriate for the substrate. Plan cable routing so conductors are protected from chafe and strain where they enter the box, and keep wiring runs supported to handle vibration underway.\u003c\/p\u003e\u003cp\u003eBecause this unit is IP40, avoid mounting where it will see spray, washdowns, or persistent condensation. For exposed cockpit areas, wet lockers, or open flybridge helm stations, a higher ingress-rated enclosure is the safer match.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits where you are keeping Vimar Eikon or Plana devices but changing the mounting location to a surface install. It also fits cleanups where you need to relocate a switch point onto a liner or furniture face without cutting in a recess box.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268861063349,"sku":"QBP199966","price":4.37,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298067_qbp199966.jpg?v=1771540496"},{"product_id":"qbp199971","title":"Vimar Isoset 3-Module Surface Enclosure, For Eikon \u0026 Plana, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14803 is a 3-module surface-mount enclosure in grey with an IP40 rating, made to house Vimar Eikon and Plana series modular devices.\u003c\/p\u003e\u003cp\u003eIt is a practical choice when you want a clean, modular finish but cannot recess a flush box into the bulkhead or panel. IP40 protection suits sheltered areas on board where it stays dry, such as inside the cabin, in a closed console, or in a protected utility space, rather than exposed decks or places that get regular washdowns.\u003c\/p\u003e\u003cp\u003eThe enclosure is plastic and uses full insulating materials, which helps when mounting on insulated walls or non-conductive panels and when keeping wiring separated inside a compact surface box.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module surface enclosure for Vimar Eikon and Plana series modular devices\u003c\/li\u003e\n\u003cli\u003eIP40 protection for protected locations on board (no water ingress rating)\u003c\/li\u003e\n\u003cli\u003ePlastic housing in grey\u003c\/li\u003e\n\u003cli\u003eWith full insulating materials\u003c\/li\u003e\n\u003cli\u003eSurface-mount format for refits and for panels where a recessed box is not possible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure follows the Vimar 3-module format and is intended to be finished with the matching 3-module accessories from the Eikon or Plana range you are installing. Confirm the series and module count of your existing plate and mounting hardware so everything lines up cleanly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the box to a flat surface and route cabling so conductors are not under tension once the modules are fitted. Allow enough slack to remove the front plate and service the devices later without pulling on terminals.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt works well for interior switching points, small control stations, and sheltered helm or nav areas where a surface enclosure keeps the installation tidy without cutting into structure. For cockpits, open flybridges, and other wet zones, use an enclosure with a protection rating intended for direct water exposure.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a damp cloth and mild soap. Avoid strong solvents that can mark plastic, and periodically check around cable entries for dust or salt buildup if the box is installed in a damp compartment.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268861096117,"sku":"QBP199971","price":6.48,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298076_qbp199971.jpg?v=1771540500"},{"product_id":"qbp200052","title":"Vimar Isoset 4-Module Surface Mounting Box, For Eikon and Plana Series, IP40, Grey, Plastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14804 is a 4-module surface-mount enclosure for installing Vimar Eikon and Plana modular devices when you cannot recess a box into the bulkhead or panel. It is rated IP40, so it belongs in protected interior locations on board where it will not see spray or washdowns.\u003c\/p\u003e\u003cp\u003eThe enclosure measures 13.6 x 8.3 x 5.5 cm and adds the space you need behind the device for terminations and cable routing. The body is plastic and includes full insulating components, which helps keep the back of the installation separated from the mounting surface.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-module surface enclosure sized for Vimar Eikon and Plana modular plates and mechanisms\u003c\/li\u003e\n\u003cli\u003eIP40 rating for dry, protected interior mounting areas\u003c\/li\u003e\n\u003cli\u003ePlastic enclosure with full insulating components for safer surface mounting\u003c\/li\u003e\n\u003cli\u003eGrey finish that blends with most helm and cabin panels\u003c\/li\u003e\n\u003cli\u003eOverall size: 13.6 x 8.3 x 5.5 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eModule counts follow the Vimar standard. Confirm your switch, socket, or control and its cover plate are a 4-module format within the Eikon or Plana family. This is the surface enclosure only, so the mechanism and cover plate are selected separately to match your circuit and layout.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFasten the enclosure to a flat surface, route the cable, then terminate the modular device and fit the cover plate. On boats, secure wiring so vibration does not work the terminals loose, and leave enough slack to service the connections later. If the mounting spot is likely to get damp, move the installation to a more sheltered area or use an enclosure with a higher ingress rating.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis enclosure works well for refits where you are adding a switch point at the nav station, bringing power to a workshop locker, or relocating controls onto a fiberglass or wood panel without cutting a recess. It also helps keep a consistent look when you are standardizing on Vimar Eikon or Plana hardware across the boat.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268861718709,"sku":"QBP200052","price":8.07,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298083_qbp200052.jpg?v=1771540504"},{"product_id":"qbp201952","title":"Vimar Arké RJ45 Cat5e Avaya UTP Socket Outlet, MPS100E Connector, T568A\/B, IDC Terminals, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM19338.1 is an RJ45 Cat. 5e UTP outlet in grey for terminating onboard data cabling at a wall plate or panel position.\u003c\/p\u003e\u003cp\u003eIt uses an AT\u0026amp;T\/Lucent Technologies\/Avaya\/Systimax (MPS100E) connector format and supports T568A or T568B universal wiring with 8 contacts. Conductors terminate onto insulation-piercing terminals, which keeps the connection compact behind the faceplate.\u003c\/p\u003e\u003cp\u003eThis insert belongs to the Vimar Net Safe structured wiring range for the Arké device system and is commonly used to bring a fixed Ethernet point to spaces like the nav station, salon, or cabins.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRJ45 outlet, Cat. 5e, unshielded (UTP) for standard twisted-pair networking\u003c\/li\u003e\n\u003cli\u003eAT\u0026amp;T\/Lucent Technologies\/Avaya\/Systimax (MPS100E) connector format\u003c\/li\u003e\n\u003cli\u003eT568A\/B universal wiring with 8 contacts\u003c\/li\u003e\n\u003cli\u003eInsulation-piercing terminals for punch-down style termination\u003c\/li\u003e\n\u003cli\u003eConductor size limit: 1.6 mm maximum at the termination point\u003c\/li\u003e\n\u003cli\u003eSuitable for round and flat cable; not intended for litz wire conductors\u003c\/li\u003e\n\u003cli\u003eCat. 5e handling note: keep pair untwist to 6.3 mm max at the connection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is a Vimar modular insert intended for the Arké system, so it fits into the matching Vimar supports and cover plates used for data outlets. It is not a loose keystone style jack.\u003c\/p\u003e\u003cp\u003eBecause the connection is unshielded, plan cable routing the same way you would for any UTP run on a boat: keep distance from high-current DC feeds, inverters, and ignition wiring where practical, and avoid tight bends right behind the outlet.\u003c\/p\u003e\u003ch6\u003eInstallation and termination\u003c\/h6\u003e\u003cp\u003eTerminate the cable using the printed colour coding for either T568A or T568B, keeping the same standard end-to-end across the network. The conductors are pressed into the insulation-piercing terminals using pincers or a punch-down style tool.\u003c\/p\u003e\u003cp\u003eFor consistent Cat. 5e performance, keep the twist in each pair right up to the terminals and do not untwist more than 6.3 mm from the connection. Once terminated, clip the outlet into the cover and confirm the run with a basic cable tester before closing the panel.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis outlet is a good match when you want a fixed Ethernet point for an onboard router, a media or work area connection, or IP-based accessories that live in protected interior spaces.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eKeep the outlet in a dry location and check occasionally for signs of moisture or corrosion at the faceplate. If a network connection becomes intermittent, re-terminate the cable to ensure the conductors are fully seated in the insulation-piercing terminals.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268862242997,"sku":"QBP201952","price":74.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298092_qbp201952.jpg?v=1771540513"},{"product_id":"qbp202110","title":"Vimar Isoset IP40 1-Module Surface Enclosure, For Eikon and Plana, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14801 is an IP40-rated surface mounting box that accepts one module from the Vimar Eikon, Arké, and Plana ranges.\u003c\/p\u003e\u003cp\u003eIt is a practical way to add a single Vimar modular device on a bulkhead or panel when you do not have space or access for a flush mounting box. The body is grey plastic with full insulation, and the enclosure size is about 6.8 x 8.3 x 5.5 cm for planning clearances behind cabinetry, inside consoles, or on interior liners.\u003c\/p\u003e\u003cp\u003eBecause it is IP40, it belongs in dry, protected areas on board. It is not meant for exposed cockpits, washdowns, or anywhere that sees direct spray.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface enclosure for one 1-module Vimar device (Eikon, Arké, Plana formats)\u003c\/li\u003e\n\u003cli\u003eIP40 protection for interior installations where water exposure is not expected\u003c\/li\u003e\n\u003cli\u003eFully insulating plastic construction to keep wiring separated from the mounting surface\u003c\/li\u003e\n\u003cli\u003eGrey finish that blends well with technical spaces and most interior panels\u003c\/li\u003e\n\u003cli\u003eCompact external dimensions: approx. 6.8 x 8.3 x 5.5 cm\u003c\/li\u003e\n\u003cli\u003eCE marked\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is the mounting box only, meant to be used with a matching 1-module insert and cover plate from the Eikon, Arké, or Plana families. Confirm your device is the 1-module size and check that you have enough depth for terminations and bend radius for the cable behind the unit.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it on a flat, rigid surface and plan cable routing so conductors are not pinched when the device is fitted. On boats, it helps to keep terminations tidy, support wiring so it cannot work loose with vibration, and leave a small service loop for future maintenance.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis enclosure fits refits and new builds that already standardize on Vimar modular hardware and need a clean surface-mount solution in cabins, nav stations, inside pilothouses, or within protected lockers. It is a good match when the goal is a neat single-module install without cutting into structural liners or finished joinery.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268862734517,"sku":"QBP202110","price":4.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298096_qbp202110.jpg?v=1771540516"},{"product_id":"qbp202333","title":"Vimar Isoset Surface Mount Enclosure, For Eikon and Plana, 8-Module (4+4), 4x2, Vertical, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14832 is an IP40 surface-mount enclosure that holds up to 8 modules in a 4+4 vertical layout for Vimar Eikon and Plana mechanisms. The box measures about 136 x 140 x 54.5 mm (13.6 x 14 x 5.5 cm) and is made from plastic with full insulating materials inside.\u003c\/p\u003e\u003cp\u003eOn a boat, this style of mounting box is useful when you want a clean, finished switch or outlet cluster but do not have the depth, access, or confidence to cut a recessed opening. Because it is IP40, it belongs in dry, sheltered interior locations, not in areas that get spray, washdowns, or heavy condensation.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e8 (4+4)-module capacity in a vertical 4x2 layout\u003c\/li\u003e\n\u003cli\u003eSurface-mount enclosure for Vimar Eikon and Plana series devices\u003c\/li\u003e\n\u003cli\u003eIP40-rated housing for protected interior mounting\u003c\/li\u003e\n\u003cli\u003eOverall size about 136 x 140 x 54.5 mm (13.6 x 14 x 5.5 cm) for planning bulkhead space and clearances\u003c\/li\u003e\n\u003cli\u003ePlastic enclosure with full insulating materials inside the box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is built around the Vimar modular format and is intended to be paired with Eikon and Plana series mechanisms and the matching supports and cover plates for an 8-module, 4+4 vertical arrangement. If you are mixing device types (switches, dimmers, data plates, etc.), confirm the total module count and that each mechanism is compatible with the Eikon or Plana system you are using.\u003c\/p\u003e\u003cp\u003eBefore ordering, measure the mounting area on the bulkhead and check for nearby trim, door swings, grab rails, or cabinet faces. Allow extra space for cable bend radius behind the mechanisms so wiring does not get forced or pinched when the front assembly is tightened down.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the box to a flat surface with corrosion-resistant fasteners suited to the substrate (fiberglass, plywood, composite panels). Where the back side of the panel is insulated or inaccessible, plan cable routing and strain relief so vibration does not work the conductors loose over time.\u003c\/p\u003e\u003cp\u003eThe enclosure itself is not voltage-specific, but the devices installed in it are. Use mechanisms, wiring, and circuit protection that match your onboard AC or DC system, and follow accepted marine wiring practice for terminations, support, and chafe protection.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis box is a solid fit for cabin bulkheads, a nav station, inside a helm console, or a utility area where you want an organized bank of controls without cutting a recess. It is also a practical choice for refits where you are extending an existing Vimar Eikon or Plana installation and want a consistent look.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the exterior with a soft cloth and keep the installation area as dry as practical. During routine checks, confirm the mounting fasteners stay tight and look for any signs of rubbing wires or stressed cable entries, especially in high-vibration spots.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268862865589,"sku":"QBP202333","price":14.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298103_qbp202333.jpg?v=1771540519"},{"product_id":"qbp202464","title":"Vimar IP55 2-Module Surface Enclosure, For Eikon\/Arké\/Plana, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14902 is a 2-module surface mounting enclosure that gives you an IP55 protected location for Vimar Eikon, Arké, or Plana devices. The housing is grey plastic and measures 6.8 x 8.3 x 6.6 cm.\u003c\/p\u003e\u003cp\u003eIt is a practical choice when you need a surface box on a bulkhead or liner and you want a wiring cavity that stands up to spray and routine washdowns around the helm, in the cockpit, or in service areas.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 enclosure format to handle spray and water jets when the full assembly is installed correctly\u003c\/li\u003e\n\u003cli\u003e2-module surface box sized for Vimar Eikon, Arké, and Plana modular mechanisms\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 6.8 x 8.3 x 6.6 cm\u003c\/li\u003e\n\u003cli\u003ePlastic body with full insulating materials in the wiring space\u003c\/li\u003e\n\u003cli\u003eApprox. 94 g housing weight\u003c\/li\u003e\n\u003cli\u003eCE marked\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is the surface enclosure body for a 2-module position. Confirm your device format and series before ordering, since module sizing and frames are specific to the Vimar range being used.\u003c\/p\u003e\u003cp\u003eDepending on the final installation, you may also need the matching front cover or plate for the protected system and the chosen switch or outlet components.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the box to a flat, solid surface and keep cable runs tidy so the device can seat without forcing the wiring. If the mounting surface is thin or insulated, the insulated cavity helps keep conductors separated from the enclosure body.\u003c\/p\u003e\u003cp\u003eSeal any penetrations through the mounting surface so water cannot track into the panel. The final protection level depends on correct assembly and careful sealing around the installation.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis enclosure fits well on boats that are already standardized on Vimar modular hardware and need a protected surface-mount point where flush mounting is not possible. Typical locations include cockpit side panels, pilothouse bulkheads, lockers, and utility spaces that see damp air and occasional spray.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue as needed and inspect the installed assembly periodically for loose fasteners, cable strain, or gaps around the mounting surface. Keeping the area clean helps the protected enclosure continue to do its job over time.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268863127733,"sku":"QBP202464","price":9.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298107_qbp202464.jpg?v=1771540523"},{"product_id":"qbp202589","title":"Vimar IP55 4-Module Surface Enclosure, For Eikon\/Arké\/Plana","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14904 is an IP55 4-module surface mounting box used to install Vimar Eikon, Arké, or Plana devices on a bulkhead or panel when you do not have a recessed wall box. The grey plastic enclosure measures 13.6 x 8.3 x 6.6 cm, so it is straightforward to plan clearance for wiring and the finished footprint on board.\u003c\/p\u003e\u003cp\u003eThis format is commonly used for switch groups, small control stations, and protected outlets in areas that see occasional spray or washdowns. It is not meant for locations that can be submerged; keeping the seal depends on using the correct front components for the chosen series and keeping cable entries properly sealed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 enclosure format for protected installations in damp and exposed areas on board when assembled and sealed correctly\u003c\/li\u003e\n\u003cli\u003e4-module (4M) capacity for Vimar Eikon, Arké, and Plana series mechanisms and plates\u003c\/li\u003e\n\u003cli\u003eSurface-mount layout for refits and for panels where cutting a recessed box is not practical\u003c\/li\u003e\n\u003cli\u003ePlastic housing in grey, with full insulating materials for a properly isolated installation\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 13.6 x 8.3 x 6.6 cm\u003c\/li\u003e\n\u003cli\u003eApproximate unit weight: 150 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is sized for 4-module layouts within the Vimar Eikon, Arké, and Plana ranges. Match it with the correct 4M mounting frames and cover plates from the same series to maintain proper alignment and a clean seal at the front.\u003c\/p\u003e\u003ch6\u003eInstallation and sealing\u003c\/h6\u003e\u003cp\u003eMount the box to a flat, solid surface where the front plate can sit flush without rocking. Route conductors with enough slack to avoid strain on terminals, and keep bends gentle so the device sits squarely in the opening. For wet-area use, take care with cable entry points and any penetrations through the mounting surface, since those details are what typically make or break the IP55 performance in real boat installs.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis style of surface box is a good match for helm and cockpit switch panels under a hardtop, utility areas, and lockers that get damp air and occasional splashes. It also works well in refits where you want a protected mounting point without opening up the structure behind a liner or insulated panel.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt residue off the outside during routine washdowns and check the front seal periodically, especially after heavy vibration or repeated access for wiring changes. If you ever remove the front plate, re-seat it carefully so the sealing surfaces stay clean and even.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268864635061,"sku":"QBP202589","price":23.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298114_qbp202589.jpg?v=1771540526"},{"product_id":"qbp170514","title":"Vimar Idea\/8000 Surface Enclosure, 3-Module, IP40, RAL 7035 Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM13033 is a surface-mount IP40 enclosure for housing 3 Vimar Idea modules or 3 Vimar 8000 special modules. It comes in RAL 7035 grey and uses a plastic body with an overall size of 10 x 9.3 x 5.6 cm.\u003c\/p\u003e\u003cp\u003eThis box is meant for locations on board where you want a clean, surface-mounted installation without cutting a recess into the panel. IP40 is suited to protected interior areas and it is not a watertight enclosure, so it should be kept away from direct spray, cockpit washdowns, and exposed deck positions.\u003c\/p\u003e\u003cp\u003eIt is supplied with adaptors that support installation of 8000 standard modules, which is useful when you are mixing module types within the same Vimar ecosystem.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface enclosure format for mounting on a bulkhead, liner, or interior panel when flush mounting is not practical.\u003c\/li\u003e\n\u003cli\u003e3-module capacity for Vimar Idea modules or Vimar 8000 special modules.\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for protected interior spaces, with no water-jet or spray sealing.\u003c\/li\u003e\n\u003cli\u003eRAL 7035 grey finish to match common Idea and 8000 installations.\u003c\/li\u003e\n\u003cli\u003ePlastic construction that will not corrode in damp cabins and enclosed helm areas.\u003c\/li\u003e\n\u003cli\u003eSupplied with 3 adaptors (08491) for installing 8000 standard modules.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1 surface-mount enclosure\u003c\/li\u003e\n\u003cli\u003e3 adaptors 08491\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is sized for a 3-module layout in the Vimar Idea system and for 3-module special devices in the 8000 range. If your installation uses 8000 standard modules, the included adaptors support that fitment. Match the module family and module count before ordering, especially when replacing an older box or mixing parts from different Vimar lines.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the enclosure to a flat, solid surface where the wiring can be routed neatly and remains accessible for service. On boats, it is typically installed in the cabin, salon, enclosed pilothouse, or inside a protected console. Keep cable routing and penetrations tidy to maintain the intended IP40 protection and to avoid chafe from vibration.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits that add or relocate cabin switches, outlets, or control modules where there is limited depth behind the panel. It also works well for new builds that want modular electrical hardware in areas that stay mostly dry and protected.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with a damp cloth and mild soap as needed. Avoid harsh solvents that can mark plastic surfaces, and check mounting tightness periodically if the installation lives in a high-vibration area.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268865159349,"sku":"QBP170514","price":8.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297961_qbp170514.jpg?v=1771540529"},{"product_id":"qbp170603","title":"Vimar Idea\/8000 Surface-Mount Enclosure, 4-Module, IP40, RAL 7035 Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM13045 is an IP40 surface-mount enclosure that holds 4 Idea modules or 4 8000 special modules, finished in RAL 7035 grey.\u003c\/p\u003e\u003cp\u003eIts standard dimensions are 136 x 56 x 83 mm, and it is supplied with 4 adaptors (08491) for installing 8000 standard modules.\u003c\/p\u003e\u003cp\u003eOn a boat, it is a clean way to add a small group of Vimar modular devices on a bulkhead or inside a console when you do not want to cut in a recessed box. IP40 is for dry, protected locations, so it belongs inside the cabin, under a hardtop, or in other sheltered areas rather than places that see washdowns or direct spray.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface-mount box for 4-module Vimar Idea devices or 4 Vimar 8000 special modules\u003c\/li\u003e\n\u003cli\u003eIP40 protection for sheltered mounting points where you want basic protection against contact and debris\u003c\/li\u003e\n\u003cli\u003eStandard dimensions: 136 x 56 x 83 mm for planning clearances behind the installation\u003c\/li\u003e\n\u003cli\u003eSupplied with 4 adaptors 08491 for fitting 8000 standard modules\u003c\/li\u003e\n\u003cli\u003eAdditional side and bottom knockouts to support cable entry and side-by-side installations\u003c\/li\u003e\n\u003cli\u003eCaptive cross-slotted stainless steel screws to help prevent lost hardware during wiring work\u003c\/li\u003e\n\u003cli\u003eTechnopolymer body with a bright RAL 7035 grey surface\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP40 surface-mount enclosure (grey, RAL 7035)\u003c\/li\u003e\n\u003cli\u003e4 x adaptor 08491 for 8000 standard module mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is sized for Vimar Idea modular devices up to 4 modules wide and for Vimar 8000 special modules. The included adaptors allow the same box to be used with 8000 standard modules when that format is part of the installation.\u003c\/p\u003e\u003cp\u003eBecause it is surface-mounted, it is a practical option on fiberglass liners, thin panels, and refit locations where there is limited depth for a recessed box. Confirm the available space for the enclosure depth and for conductor bend radius before drilling.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the enclosure to a flat surface, route conductors through the provided knockouts, and use appropriate glands or bushings so the cable jacket is protected and strain relief is handled cleanly. A drip loop on any incoming cable helps keep incidental moisture from tracking into the wiring area.\u003c\/p\u003e\u003cp\u003eThe IP40 rating assumes the installation is completed with the enclosure closed and with suitable cable or conduit entries. When the installed device has an open front, such as a socket outlet, the protection at the front of the device is lower than IP40, but it is not lower than IP20.\u003c\/p\u003e\u003ch6\u003eWhere it fits on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for interior switch groups at the nav station, at a cabin entry, inside lockers, or on a protected helm console where surface mounting keeps the job simple and avoids cutting into finished panels.\u003c\/p\u003e\u003cp\u003eIf your mounting location is exposed to spray, rain, or routine washdowns, plan for a higher ingress protection enclosure rather than an IP40 box.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268865552565,"sku":"QBP170603","price":10.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297965_qbp170603.jpg?v=1771540532"},{"product_id":"qbp170990","title":"Vimar Idea IP55 2-Module Surface-Mount Enclosure, For 8000 Special Modules, RAL 7035 Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM13523 is an IP55 surface-mount enclosure for two Vimar Idea modules or two 8000 special modules, used to keep modular switches and outlets protected in splash-prone areas on a boat.\u003c\/p\u003e\u003cp\u003eIt is finished in RAL 7035 grey and comes with two 08491 adaptors for fitting 8000 standard modules. The body is plastic with insulating fill, which suits mounting on insulated panels and helps avoid exposed conductive surfaces around the module area.\u003c\/p\u003e\u003cp\u003eFor fit checks, the enclosure is rated for devices up to 68 mm wide, 83 mm high, and 65 mm deep.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 protection for locations that see spray and dust, such as cockpits, flybridges, and utility areas\u003c\/li\u003e\n\u003cli\u003eSurface-mount box for adding a 2-module station without cutting a recessed mounting cavity\u003c\/li\u003e\n\u003cli\u003eCompatible with 2 Idea modules or 2 8000 special modules\u003c\/li\u003e\n\u003cli\u003eIncludes two 08491 adaptors to accept 8000 standard modules\u003c\/li\u003e\n\u003cli\u003eRAL 7035 grey housing for a clean, consistent look with common electrical enclosures on board\u003c\/li\u003e\n\u003cli\u003ePlastic enclosure with insulating fill for use on insulated bulkheads and panels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 enclosure in RAL 7035 grey\u003c\/li\u003e\n\u003cli\u003e2 x 08491 adaptors for 8000 standard modules\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount on a flat, solid surface with room to access the modules and wiring. In exposed spots, route wiring with a drip loop before it enters the box and seal cable entries with appropriate glands or boots so the IP55 protection is maintained.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is for Vimar Idea modular devices and the 8000 special module footprint. Confirm your devices are 2-module width and stay within the maximum device size so terminals and cable bends do not interfere with closing the enclosure.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eIt is commonly used for protected switch points for deck lighting, pumps, and small accessories near companionways, helm stations, wet lockers, and equipment spaces. It suits boats where electrical gear is exposed to occasional spray or washdown, rather than continuous immersion.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268866142389,"sku":"QBP170990","price":12.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297969_qbp170990.jpg?v=1771540535"},{"product_id":"qbp171010","title":"Vimar Idea\/8000 3-Module IP55 Wall-Mount Enclosure, For Idea and 8000 Modules, Includes 3 Adaptors for 8000 Modules, Grey Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM13533 is an IP55 surface-mount enclosure for a 3-module Vimar Idea installation, finished in grey RAL 7035. It is used when you need a protected housing on top of a bulkhead or panel instead of cutting a recessed opening.\u003c\/p\u003e\u003cp\u003eThe enclosure accepts up to 3 Idea modules or 3 8000 special modules, and it is supplied with three 08491 adaptors for fitting 8000 standard modules. On board, it is typically used to bring switches or other modular devices into areas that see spray, dust, and day-to-day handling, while keeping the installation tidy and service-friendly.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55-rated enclosure that helps keep spray and dust away from the installed modules when properly closed and mounted\u003c\/li\u003e\n\u003cli\u003eSurface-mount format for bulkheads and interior panels where a flush box is not practical\u003c\/li\u003e\n\u003cli\u003e3-module capacity for Vimar Idea devices and mixed module layouts within the Idea format\u003c\/li\u003e\n\u003cli\u003eCompatible with 3 Idea modules or 3 8000 special modules\u003c\/li\u003e\n\u003cli\u003eIncludes three 08491 adaptors for installing 8000 standard modules\u003c\/li\u003e\n\u003cli\u003eGrey RAL 7035 finish that matches common marine interior trims and panels\u003c\/li\u003e\n\u003cli\u003eInsulating plastic housing that avoids corrosion concerns common with metal boxes in damp spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is intended for the Vimar Idea module system and the 8000 module formats noted above. Before ordering, confirm that your devices and frames are from the Idea or 8000 family, since other Vimar series use different module geometry and will not seat correctly.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it on a flat surface that is firm and free of deep grooves so the enclosure can close evenly. Plan cable routing so conductors are supported and not pulled tight, especially in areas that vibrate underway. If the installation includes any cable entry points, take care to seal them properly so water cannot track into the enclosure from behind the panel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis enclosure makes sense for boats running Vimar Idea or 8000 modular devices that need a surface-mount point in exposed locations such as a cockpit switch position, a companionway area, or a utility locker. It is meant for splashes and washdowns, not for spaces that can flood or sit underwater.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse off salt residue when needed and keep the closing surfaces clean so the enclosure can seal as intended. During routine checks, look for wire chafe inside the box and resecure any conductors that have loosened from vibration before closing it back up.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eIP55 3-module surface-mount enclosure (grey RAL 7035)\u003c\/li\u003e\n\u003cli\u003e3 adaptors 08491 for 8000 standard modules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268866732213,"sku":"QBP171010","price":17.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297973_qbp171010.jpg?v=1771540538"},{"product_id":"qbp172931","title":"Vimar Idea 3-Module Mounting Frame, With Screws, 60 x 97 mm, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16713 is a 3-module mounting frame that holds Vimar IDEA modular devices steady in a compatible 3-module mounting box so the front plate sits flush and does not shift over time.\u003c\/p\u003e\u003cp\u003eIt mounts with screws and the modules fasten from the back side of the frame, which helps when you want to wire the devices first and then bring the assembly forward for final alignment. The grey thermoplastic body does not corrode, which is handy around damp lockers and humid cabins, but it still relies on the box and plate to keep everything protected from spray.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module frame for Vimar IDEA installations on compatible 3-module mounting boxes\u003c\/li\u003e\n\u003cli\u003eSupplied with fixing screws for a screw-mounted install that stays put on boats that see vibration\u003c\/li\u003e\n\u003cli\u003eModules mount from the back side of the frame for cleaner wiring and easier device positioning\u003c\/li\u003e\n\u003cli\u003eCan be installed horizontally or vertically while still supporting three modules\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction in grey for a clean match behind common IDEA cover plates\u003c\/li\u003e\n\u003cli\u003eNo built-in installation box, so the correct flush-mount box behind the panel or bulkhead is required\u003c\/li\u003e\n\u003cli\u003eNot intended for 60 mm round junction boxes or wall-duct style systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is meant for Vimar IDEA 3-module cover plates and the matching 3-module mounting boxes used in that system. It is commonly used behind modular switches, sockets, and low-voltage inserts where you want three devices grouped in one position.\u003c\/p\u003e\u003cp\u003eBefore ordering, confirm you have a rectangular 3-module box at the mounting location and that your plate and inserts are from the IDEA range. If your cutout is for a 60 mm round box, this is not the right support.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFasten the frame to the mounting box with the included screws, then secure the module inserts from the back side. Once the wiring is terminated and strain-relieved inside the box, fit the front plate and verify the devices sit square to the bulkhead or panel. In areas that may see moisture, keep terminations protected inside a suitable box and route cables to avoid drip paths.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats already using the Vimar IDEA modular system, especially for refits where you are cleaning up a helm switch bank, a nav-station outlet cluster, or a cabin control point and want a tidy 3-module layout.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter the first few runs, recheck screw tightness if the panel is exposed to vibration. Clean the visible edges with mild soap and water and avoid aggressive solvents that can haze plastics.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268867092661,"sku":"QBP172931","price":2.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297977_qbp172931.jpg?v=1771540540"},{"product_id":"qbp172955","title":"Vimar IDEA 4-Module Mounting Frame, Screws Included, Grey, Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16714 is a 4-module mounting frame with fixing screws for Vimar rectangular 4-module flush mounting boxes in the Idea system, finished in grey.\u003c\/p\u003e\u003cp\u003eIt is the piece that holds the modular inserts in place behind the cover plate, so your switches, outlets, or other Idea modules sit straight and stay secure when the boat is moving.\u003c\/p\u003e\u003cp\u003eThis frame is a mechanical fitting only; the electrical ratings and wiring details come from the modules and the mounting box you pair it with.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-module frame for Vimar Idea rectangular flush mounting installations\u003c\/li\u003e\n\u003cli\u003eSupplied with fixing screws for screw mounting to the box\u003c\/li\u003e\n\u003cli\u003eModules mount from the back side, keeping the front clean behind the cover plate\u003c\/li\u003e\n\u003cli\u003eCan be installed in horizontal or vertical orientation\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction, so the frame itself will not corrode in a damp cabin or galley environment\u003c\/li\u003e\n\u003cli\u003eOverall frame size about 60 x 122 mm (2.36 x 4.8 in.)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is sized for 4-module Vimar Idea layouts and is meant for rectangular 4-module mounting boxes. It is not a match for round junction boxes or floor-box style enclosures.\u003c\/p\u003e\u003cp\u003eCommon box pairings include VMV71304, VMV71304.AU, and VMV71614, and it is used behind 4-module Idea cover plates (round or square styles).\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the compatible flush box solidly in the bulkhead or panel opening, then fasten the frame with the supplied screws. With the frame secured, the modular inserts are fitted from the back side before the cover plate is installed.\u003c\/p\u003e\u003cp\u003eOn boats, take a moment to confirm the box is supported so vibration does not work the panel loose over time, especially in helms and high-traffic cabin areas.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis frame is a good match when you are building or refreshing a Vimar Idea switch or outlet station at the helm, nav desk, galley, or cabin entry, where you want a tidy flush finish with standard Idea modules.\u003c\/p\u003e\u003cp\u003eIf the location sees frequent spray or washdowns, pair the assembly with an appropriate cover plate or enclosure so the electrical parts are protected for that environment.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4-module mounting frame (grey)\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268867518645,"sku":"QBP172955","price":6.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297981_qbp172955.jpg?v=1771540543"},{"product_id":"qbp173618","title":"Vimar IDEA 6-Module Mounting Frame, For 6\/7-Module Boxes, 60 x 172mm, With Screws, Grey Thermoplastic","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16716 is a 6-module flush-mount mounting frame with fixing screws for 6\/7-module rectangular mounting boxes, made from grey thermoplastic.\u003c\/p\u003e\u003cp\u003eIt is the support that holds Vimar Idea modular devices in a straight line behind a matching 6-module cover plate, so switches and other modules stay aligned and do not loosen up with vibration.\u003c\/p\u003e\u003cp\u003eThe frame accepts one row of six modules and can be installed horizontally or vertically. Face size is 60 x 172 mm, and the modules mount from the back side of the frame.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6-module mounting frame for Vimar Idea modular devices behind a matching 6-module cover plate\u003c\/li\u003e\n\u003cli\u003eFits 6\/7-module rectangular flush-mount boxes; commonly paired with VMV71306, VMV71306.AU, and VM71616 boxes\u003c\/li\u003e\n\u003cli\u003eScrew mounting to the box with fixing screws included\u003c\/li\u003e\n\u003cli\u003eBack-side module mounting for clean front alignment\u003c\/li\u003e\n\u003cli\u003eInstalls horizontally or vertically while keeping a single row of six modules\u003c\/li\u003e\n\u003cli\u003eFrame only (no built-in installation box)\u003c\/li\u003e\n\u003cli\u003eNot intended for round junction boxes, floor boxes, wall duct mounting, or DIN-rail mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is part of the Vimar Idea system and is used with 6-module Idea cover plates (Round and Square styles). It is sized for rectangular flush-mount boxes that accept 6 or 7 modules, so confirm your box type and spacing before cutting a new opening in a panel.\u003c\/p\u003e\u003cp\u003eFor replacements, match the module count and the box code you already have on board. If the cutout forces a vertical orientation, the frame still carries one row of six modules.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFix the frame to the flush-mount box using the supplied screws, then mount the modules from the back side of the frame and finish with the cover plate. Leave enough wire slack inside the box so a module can be pulled forward later for service without tugging on terminals.\u003c\/p\u003e\u003cp\u003eOn fiberglass or thin bulkheads, make sure the box is seated on a flat surface before tightening the screws. That keeps the cover plate sitting flush and helps prevent squeaks or movement underway.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis frame is commonly used to build clean, modular switch and outlet stations at the helm, nav station, or cabin entry, where you want a consistent layout across lighting, pumps, and accessory controls.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits where an older switch cluster is being replaced with an Idea layout that can be expanded or reconfigured later by swapping individual modules.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe body is thermoplastic. Keep it behind the cover plate and avoid harsh solvents during cleaning. A damp cloth wipe is usually enough for routine care in cabins and protected areas.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6-module mounting frame (grey)\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268867944629,"sku":"QBP173618","price":12.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297985_qbp173618.jpg?v=1771540546"},{"product_id":"qbp173772","title":"Vimar Idea Panel Mounting Frame, 1-Module, With Screws, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16771 is a 1-module mounting frame with fixing screws for panel mounting, finished in grey thermoplastic. It holds a single Vimar Idea module behind a panel and pairs with 1-module Idea cover plates (round or square) for a tidy, finished look on a boat switch panel.\u003c\/p\u003e\u003cp\u003eThe module mounts from the back side of the frame, so the front face stays clean and service access is from behind the panel. The frame can be installed horizontally or vertically, and its overall size is about 65 x 29.5 mm.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for refits and new builds where you are standardizing on Vimar Idea modules and need one control point in a tight space, like a helm console, nav station panel, or an interior utility switch cluster.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSupports 1 Vimar Idea module for panel-mounted installations\u003c\/li\u003e\n\u003cli\u003eCompatible with Vimar Idea 1-module cover plates in round or square styles\u003c\/li\u003e\n\u003cli\u003eRear-loading module mounting keeps the front face neat and allows access from behind the panel\u003c\/li\u003e\n\u003cli\u003eCan be installed in horizontal or vertical orientation\u003c\/li\u003e\n\u003cli\u003eGrey thermoplastic frame, approx. 65 x 29.5 mm overall size\u003c\/li\u003e\n\u003cli\u003eFor panel mounting applications, not intended for 60 mm round junction boxes or 35 mm DIN-rail mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module mounting frame\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is meant for Vimar Idea-format 1-module devices and the matching 1-module cover plates. It is for panel installations and does not include a built-in installation box, so plan for appropriate clearance and support behind the panel based on the module and wiring you are fitting.\u003c\/p\u003e\u003cp\u003eIt is not suitable for a 60 mm round flush box, floor boxes, wall ducts, or DIN-rail mounting. If you are replacing an existing frame, confirm you are staying within the Vimar Idea ecosystem so the module and cover plate alignment matches.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePosition the frame on the panel, align it for horizontal or vertical mounting, and fasten it using the supplied screws (or suitable hardware for your panel material). Mount the module from the rear of the frame, complete wiring with proper strain relief behind the panel, then finish the front with the matching 1-module cover plate.\u003c\/p\u003e\u003cp\u003eOn boats, it is worth sealing any panel penetrations and keeping wiring runs supported so vibration does not work connections loose over time.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe thermoplastic body is a good fit for interior panels and protected locations. For washdown-prone areas, keep the frame and module protected by the surrounding panel and cover plate, and avoid harsh solvents during cleaning.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268868010165,"sku":"QBP173772","price":4.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297989_qbp173772.jpg?v=1771540548"},{"product_id":"qbp173852","title":"Vimar Idea 2-Module Flush Panel Mounting Frame, With Screws, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16772 is a 2-module mounting frame for flush panel installation, used to secure Vimar Idea modular devices behind a boat’s switch panel or electrical distribution faceplate. The frame is grey and measures about 122 x 29.5 mm, which helps when you are laying out tight helm or cabin panels.\u003c\/p\u003e\u003cp\u003eIt fastens to the panel with screws and the modules mount from the back side, so you can build the assembly up on the bench and then bring it to the cutout. The 2-module layout is a 1+1 stacked format, and the frame can be oriented either horizontally or vertically to suit the panel design.\u003c\/p\u003e\u003cp\u003eThis is a panel-mount frame only, with no built-in installation box. It is not intended for 60 mm round junction boxes, floor boxes, wall duct installations, or DIN rail mounting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module panel-mount frame in a 1+1 stacked arrangement (grey)\u003c\/li\u003e\n\u003cli\u003eFlush-mounted (plaster) style frame for clean panel installs\u003c\/li\u003e\n\u003cli\u003eModule mounting from the back side for easier assembly and service access\u003c\/li\u003e\n\u003cli\u003eMounting direction supports horizontal or vertical orientation on the panel\u003c\/li\u003e\n\u003cli\u003eScrew-fixed to the panel and supplied with fixing screws\u003c\/li\u003e\n\u003cli\u003eFits Idea Round and Square 2-module cover plates\u003c\/li\u003e\n\u003cli\u003eUses VM16776.AU panel mounting boxes (two required) and does not include an installation box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is for Vimar Idea modular layouts where two devices are stacked in a single 2-module position. It pairs with Idea Round and Square 2-module cover plates, and the panel-mount installation uses VM16776.AU mounting boxes behind the panel (two required), which should be planned into your behind-panel depth and wiring space.\u003c\/p\u003e\u003cp\u003eIt is not suitable for 60 mm round junction boxes, floor boxes, wall duct systems, or DIN rail mounting, so it is best used where you are building a dedicated instrument panel, switch panel, or custom electrical faceplate on board.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eDry-fit the panel cutout and confirm clearance behind the panel for the mounting boxes, wiring bend radius, and any nearby steering or throttle linkages. The modules load from the rear of the frame, then the assembly is fixed to the panel with screws before the compatible cover plate is installed on the front.\u003c\/p\u003e\u003cp\u003eOn boats that see regular vibration, it is worth re-checking fasteners after the first few trips and during routine electrical inspections.\u003c\/p\u003e\u003ch6\u003eMaterials and use on board\u003c\/h6\u003e\u003cp\u003eThe frame is made from thermoplastic, so it will not create rust staining around a helm or cabin panel the way exposed metal hardware can. It is a good match for refits where the boat already uses Vimar Idea devices, or for new panels where you want a consistent, modular layout across switches and controls.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module mounting frame\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268868370613,"sku":"QBP173852","price":13.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297993_qbp173852.jpg?v=1771540551"},{"product_id":"qbp197781","title":"Vimar Eikon Mounting Frame, 1M, Claws, 60 mm Round Box, Flush-Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM21601.0 is a 1-module mounting frame with claws for Ø 60 mm round flush-mount boxes, used to fit Vimar Eikon inserts cleanly into a wall or panel cutout.\u003c\/p\u003e\u003cp\u003eIt supports the same single module position in both horizontal and vertical orientations, with the module insert mounted from the front for straightforward wiring and service access. This version is supplied without side blank covers, keeping the layout focused on one 1M device position.\u003c\/p\u003e\u003cp\u003eOn boats, this type of frame is most commonly used behind interior switch and outlet locations where you want a neat, flush look and a secure mechanical hold that stands up to vibration when the junction box is properly anchored.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module frame with claws for Ø 60 mm round flush-mount boxes\u003c\/li\u003e\n\u003cli\u003eAccepts horizontal or vertical installation while keeping a single 1M device position\u003c\/li\u003e\n\u003cli\u003eFront-side module mounting for easier access during wiring and future servicing\u003c\/li\u003e\n\u003cli\u003eScrew-fixing style installation; mounting screws are not supplied\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with an untreated surface finish\u003c\/li\u003e\n\u003cli\u003eNot intended for floor boxes, wall ducts, or DIN rail mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is for Vimar Eikon installations that use a round Ø 60 mm flush-mount box. It is meant to hold one modular insert position and does not include side blanking pieces, so it suits layouts where you are finishing a single device location rather than filling a wider opening.\u003c\/p\u003e\u003cp\u003eThe mounting box is not included. For marine refits, it is worth confirming the box type and depth behind the panel before ordering, especially in tight bulkheads or cabinetry where wiring bend radius can be the limiting factor.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the frame to the flush box using the appropriate fixing points for the box style, then align the frame for the desired horizontal or vertical orientation before tightening. Once the frame is secure, the module insert mounts from the front, which keeps the workflow simple when you are working in confined spaces.\u003c\/p\u003e\u003cp\u003eOn board, clean cable routing and strain relief matter as much as the fasteners. Leave enough slack to service the device later, and make sure the box is firmly fixed to the panel so vibration does not work the installation loose over time.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for boats already fitted with Vimar Eikon devices, or new builds using Ø 60 mm round flush boxes where you want a consistent finish across cabins, saloons, and navigation areas. Because it is a mounting frame rather than a sealed enclosure, it is typically used in interior locations or protected panels rather than exposed washdown areas.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268868796597,"sku":"QBP197781","price":7.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298059_qbp197781.jpg?v=1771540554"},{"product_id":"qbp138894","title":"Vimar Idea 2-Module DIN-Rail Mounting Frame, DIN 60715 TH35, RAL 7035","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16727 is a 2-module mounting frame for installing compatible modular devices on a 35 mm DIN (60715 TH35) rail, finished in RAL 7035 grey.\u003c\/p\u003e\u003cp\u003eIt is meant for switchboards and control enclosures where you are building out a clean DIN-rail layout. Module inserts fit from the back side of the frame, and the frame can be oriented horizontally or vertically to suit the space you have inside the cabinet.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module frame for installation on DIN (60715 TH35) 35 mm rail systems\u003c\/li\u003e\n\u003cli\u003eRAL 7035 grey finish to match common electrical enclosures and switchboard builds\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction that avoids corrosion concerns common with exposed metal parts\u003c\/li\u003e\n\u003cli\u003eModule inserts mount from the back side for straightforward assembly inside a panel\u003c\/li\u003e\n\u003cli\u003eSupports horizontal or vertical mounting direction for flexible panel layouts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is intended for use on standard 35 mm DIN rails (TH35 profile) found in most marine and industrial electrical cabinets. Confirm that your enclosure has enough clearance in front of the DIN rail for the installed modules and their wiring, especially where harnesses need to bend and route away cleanly.\u003c\/p\u003e\u003cp\u003eIf you are replacing an existing holder, check both the rail profile and the module count so the finished layout lines up with adjacent DIN-rail components and any panel labeling or covers used in the switchboard.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the frame onto the DIN rail in the desired position, then fit the modular inserts from the back side of the frame. After wiring, re-check that nothing is pushing the modules out of alignment and that vibration on the boat cannot work the assembly loose inside the enclosure.\u003c\/p\u003e\u003cp\u003eFor saltwater environments, this type of hardware is typically installed inside a protected cabinet or electrical box rather than in an exposed location. Keeping the enclosure dry and properly sealed matters more than the frame itself.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical fit for boats using DIN-rail based electrical panels where modular controls or small devices are being organized into a tidy, serviceable layout. It also suits refits where you are adding new DIN-rail modules in a helm console, nav station, or systems locker and want the spacing to stay consistent.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003ePeriodically inspect the panel for movement after heavy running or pounding and verify the DIN rail remains secure in the enclosure. Clean with a lightly damp cloth as needed and avoid aggressive solvents that can haze or soften thermoplastics.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268872663221,"sku":"QBP138894","price":7.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297885_qbp138894.jpg?v=1771540569"},{"product_id":"qbp139241","title":"Vimar IDEA 12 (6+6)-Module Mounting Frame, For V71320\/V71620\/V71720 \u0026 09920 Boxes, With Screws, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16718 is a 12 (6+6)-module mounting frame with screws for V71320, V71620 and V71720 flush boxes or the 09920 surface mounting box.\u003c\/p\u003e\u003cp\u003eIt supports a two-row layout (6 modules per row) for Vimar modular wiring devices, with the module inserts mounted from the back side of the frame. The frame can be installed horizontally or vertically, which helps when space and switch-panel layout on a boat do not match a single standard orientation.\u003c\/p\u003e\u003cp\u003eMade from grey thermoplastic, it is a non-metal frame that avoids corrosion issues around salt air. Pair it with the correct mounting box and cover plate so the finished assembly stays tight and aligned when the boat is vibrating underway.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12-module format in a 6+6 layout (6 modules wide, 2 rows tall)\u003c\/li\u003e\n\u003cli\u003eFits V71320, V71620 and V71720 flush mounting boxes, and the 09920 surface mounting box\u003c\/li\u003e\n\u003cli\u003eSupplied with mounting screws\u003c\/li\u003e\n\u003cli\u003eModule inserts mount from the back side of the frame for clean alignment behind the cover plate\u003c\/li\u003e\n\u003cli\u003eCan be mounted in horizontal or vertical orientation\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction in grey\u003c\/li\u003e\n\u003cli\u003eNo built-in installation box, intended to be used with the compatible box listed above\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame uses the Vimar module system, so the inserts and cover plate need to match the same system and layout. The 12-module count refers to the 6-by-2 arrangement of modules on the frame.\u003c\/p\u003e\u003cp\u003eIt is not suitable for 60 mm round junction boxes and it is not intended for DIN-rail mounting. Since the frame does not include an installation box, plan the install around the correct flush or surface box so there is enough room for wiring and strain relief behind the panel.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eFasten the frame to the compatible mounting box using the supplied screws, then fit the module inserts from the rear and square everything up before the cover plate goes on. Once tightened, the frame holds the insert grid in place so the front faces sit straight and do not shift with use.\u003c\/p\u003e\u003cp\u003eOn boats, this style of mounting is most at home in protected interior locations such as cabins, helm consoles, nav stations, and technical panels. Keep the wiring area behind the box dry and serviceable, and leave clearance for cable bends and future access.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a practical match for refits or new builds that already use Vimar modular devices and need a two-row 12-module opening in a bulkhead or panel. It also works well when you are standardizing multi-gang switch and outlet groups so the panel layout stays consistent across cabins and service areas.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMounting frame (12 modules, 6+6)\u003c\/li\u003e\n\u003cli\u003eMounting screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268873187509,"sku":"QBP139241","price":15.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297889_qbp139241.jpg?v=1771540571"},{"product_id":"qbp139434","title":"Vimar DIN Rail Mounting Frame, 1-Module, 2x17.5mm, RAL 7035 Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16726 is a 1-module mounting frame for fitting a single Vimar Idea insert onto a 35 mm DIN rail (EN 60715 TH35). It occupies 2 DIN modules (2 x 17.5 mm) and comes in RAL 7035 grey.\u003c\/p\u003e\u003cp\u003eThe module insert mounts from the back of the frame, and the frame can be oriented either horizontally or vertically depending on how your switchboard is laid out.\u003c\/p\u003e\u003cp\u003eOn board, this is the kind of small hardware that keeps a DIN-rail panel clean and serviceable when you are mixing modular switching devices into a DC distribution area or a control cabinet.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits standard 35 mm DIN rail (EN 60715 TH35)\u003c\/li\u003e\n\u003cli\u003eHolds one 1-module insert (Vimar Idea module format)\u003c\/li\u003e\n\u003cli\u003eTakes up 2 x 17.5 mm DIN modules of rail width\u003c\/li\u003e\n\u003cli\u003eBack-side mounting for the module insert\u003c\/li\u003e\n\u003cli\u003eInstalls in horizontal or vertical orientation\u003c\/li\u003e\n\u003cli\u003eThermoplastic frame with RAL 7035 grey finish\u003c\/li\u003e\n\u003cli\u003eNo built-in installation box and no screws included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is intended for DIN-rail switchboards and control units where components are arranged on a 35 mm top-hat rail. It is not a flush-mount frame and it is not meant for wall-duct runs, floor box installs, or round 60 mm junction boxes.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSnap the frame onto the DIN rail, then insert the 1-module device from the back side of the frame. Leave rail space for 2 DIN modules (2 x 17.5 mm) and allow clearance behind the rail for wiring and terminal access on the installed device.\u003c\/p\u003e\u003cp\u003eSince the frame is an open DIN-rail accessory, it should live inside a protected enclosure or switchboard where it stays out of spray and washdowns.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eA practical fit for boaters building a compact DIN-rail subpanel with Vimar Idea modules for cabin circuits, accessory switching at the helm, or a neat control row inside an electrical locker.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268874170549,"sku":"QBP139434","price":5.35,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297890_qbp139434.jpg?v=1771540574"},{"product_id":"qbp140019","title":"Vimar Idea 2-Reduced-Module Mounting Frame With Claws, For 60mm Round Flush or 09971 Surface Box","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM17082 is a 2-reduced-module mounting frame with claws for ø 60 mm round flush boxes or Vimar 09971 surface mounting boxes. It supports 2 modules in a horizontal layout, or 1 module vertically, with module inserts mounted from the back side.\u003c\/p\u003e\u003cp\u003eThis is the piece that holds Vimar modular switching devices steady in the box before the cover plate goes on. On a boat, it is typically used behind cabin and helm switch points where you want a clean, serviceable installation inside a standard round box.\u003c\/p\u003e\u003cp\u003eThe frame is gray thermoplastic and it is supplied without a built-in installation box and without screws. It is intended for flush-mounted installation and uses claw fixing to grip the box.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits ø 60 mm round flush junction boxes and Vimar 09971 surface mounting boxes\u003c\/li\u003e\n\u003cli\u003eHolds 2 reduced modules horizontally or 1 module vertically (module system)\u003c\/li\u003e\n\u003cli\u003eClaw mounting for secure fixing inside the round box\u003c\/li\u003e\n\u003cli\u003eBack-side insertion of module inserts for a tidy front finish and easier servicing\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction in gray\u003c\/li\u003e\n\u003cli\u003eNo built-in installation box and no screws\u003c\/li\u003e\n\u003cli\u003eNot suitable for floor boxes, wall ducts, or DIN-rail 35 mm mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mounting frame is made for Vimar modular domestic switching devices in the reduced-module format and installs into standard ø 60 mm round boxes. It also matches the Vimar 09971 surface mounting box format when you need a surface install rather than a flush box.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSet the frame into the round box and lock it in place using the claws, then fit the module inserts from the back side and align for a horizontal or vertical layout. On boats, it helps to confirm box depth and cable bend radius before final assembly so the modules sit flat and the wiring is not under tension when the faceplate is tightened.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis frame makes sense for refits and new builds that use Vimar modular devices for light switching, accessory controls, and similar low-profile switch points in cabins, galleys, and helm panels. It is a good match when you are standardizing multiple locations around the boat on the same ø 60 mm round box format for cleaner service access later.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268875153589,"sku":"QBP140019","price":6.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297894_qbp140019.jpg?v=1771540586"},{"product_id":"qbp140108","title":"Vimar IDEA 2-Reduced-Module Mounting Frame, No Screws, 60 mm Centers, 56x56 mm Flush Boxes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM17087 is a 2-reduced-module mounting frame used to secure Vimar IDEA modular switching devices in boxes with 60 mm fixing centers, 56 x 56 mm flush boxes, or the 09971 surface mounting box.\u003c\/p\u003e\u003cp\u003eIt sits behind the cover plate and holds the inserts in position, which helps keep a clean finish when you are adding a switch at the helm, refreshing cabin outlets, or standardizing panels during a refit.\u003c\/p\u003e\u003cp\u003eThe grey thermoplastic frame can be installed horizontally or vertically depending on how the box is oriented, and the module inserts mount from the rear of the frame.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSupport for 2 reduced modules (2M) within Vimar IDEA modular installations\u003c\/li\u003e\n\u003cli\u003eMade for mounting boxes with 60 mm fixing centers and 56 x 56 mm flush mounting boxes\u003c\/li\u003e\n\u003cli\u003eCompatible with the 09971 surface mounting box format\u003c\/li\u003e\n\u003cli\u003eGrey thermoplastic construction suited to interior panels and trim locations on board\u003c\/li\u003e\n\u003cli\u003eWorks in horizontal or vertical orientation to match the mounting box position\u003c\/li\u003e\n\u003cli\u003eSupplied without screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is intended for setups using Vimar IDEA reduced modules and a matching cover plate. Confirm your mounting box pattern before ordering, since 60 mm fixing-center boxes and 56 x 56 mm boxes use different layouts even when the finished plate size looks similar.\u003c\/p\u003e\u003cp\u003eIt is a good match for boats already wired with Vimar IDEA devices, where you want consistent spacing and alignment across cabins, galleys, and helm side panels.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eTest-fit the frame in the box to confirm the fixing centers line up and the inserts sit square. Because the modules mount from the rear, leave enough wiring slack so the assembly can be pulled forward later for inspection or replacement.\u003c\/p\u003e\u003cp\u003eFinish with the appropriate cover plate after the inserts are secured and aligned.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eClean with mild soap and water and avoid solvent-based cleaners that can dull or haze thermoplastic parts.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268875219125,"sku":"QBP140108","price":3.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297898_qbp140108.jpg?v=1771540588"},{"product_id":"qbp140240","title":"Vimar Idea 5-Module Mounting Frame, With Screws, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16715 is a 5-module mounting frame with fixing screws for Vimar Idea rectangular flush-mounting boxes, finished in grey. It is the internal support that holds the modular devices in place behind the cover plate, keeping switches, outlets, and other Idea modules aligned and secure.\u003c\/p\u003e\u003cp\u003eThis frame carries up to 5 modules across and can be installed either horizontally or vertically. Overall size is approximately 60 x 147 mm, so it is sized for standard 5-module layouts where you want a clean, consistent lineup in a cabin, head, or nav station panel.\u003c\/p\u003e\u003cp\u003eIt is not intended for 60 mm round junction boxes, floor boxes, or in-wall trunking style systems. For best results on a boat, plan it for protected interior locations where it sits behind a cover plate and is not exposed to spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e5-module mounting frame for the Vimar Idea system, for rectangular flush-mounting boxes\u003c\/li\u003e\n\u003cli\u003eMounts with screws and includes fixing screws for a straightforward install\u003c\/li\u003e\n\u003cli\u003eSupports horizontal or vertical orientation while keeping the module lineup consistent\u003c\/li\u003e\n\u003cli\u003eRear-side module mounting style to keep the front face clean once the cover plate is fitted\u003c\/li\u003e\n\u003cli\u003eGrey finish to match Idea grey plates and surrounding hardware\u003c\/li\u003e\n\u003cli\u003eNot compatible with 60 mm round boxes, floor boxes, or trunking style in-wall ducts\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction suited to interior electrical fit-outs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e5-module mounting frame\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is for Vimar Idea 5-module rectangular flush-mounting boxes and matching Idea cover plates. If your boat is fitted with a different Vimar series or a different module format, confirm the system family and module count before ordering.\u003c\/p\u003e\u003cp\u003eIt will not fit 60 mm round junction boxes, and it is not meant for floor box installs or trunking style systems. When replacing an existing frame, count the modules across the opening and verify the box format is rectangular and sized for 5 modules.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePosition the frame on the flush box and secure it using the supplied screws. The modular inserts mount from the rear side of the frame, then the cover plate finishes the front. Because the frame can be installed horizontally or vertically, you can match the layout to your switch panel orientation without changing the module count.\u003c\/p\u003e\u003cp\u003eOn boats, take a moment to check for cable bend radius and box depth behind the panel or liner so the modules seat fully and the cover plate sits flat.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis part makes sense for refits and new installs where you are building a tidy, modular switch and outlet row in interior spaces. It is a good match for owners standardizing on Vimar Idea modules across multiple cabins or consoles and wanting consistent spacing and alignment behind the plates.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268875251893,"sku":"QBP140240","price":13.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297902_qbp140240.jpg?v=1771540591"},{"product_id":"qbp141475","title":"Vimar Flush Mounting Box, 3-Module, IP55, Plastic, Grey","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM13731.S is a 3-module flush mounting box, sized 126 x 102 mm with a total depth of 72 mm, built for IP55 cover installations where you want a protected device station set into a panel or bulkhead. The grey technopolymer body gives you a clean recess to route wiring and seat the device and cover assembly.\u003c\/p\u003e\u003cp\u003eOn a boat, this style of recessed box is typically used anywhere a switch, outlet, or control point needs extra protection from spray, washdowns, and dust, while keeping the finished surface easy to wipe down. It is a good fit when you are matching an existing Vimar protected station and need the correct 3-module box behind the cover.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module (3M) recessed mounting box for protected IP55 cover installations\u003c\/li\u003e\n\u003cli\u003eCompatible with covers 13731.Q, 13731.Q.A, 13733.Q, and 13733.Q.A\u003c\/li\u003e\n\u003cli\u003eOverall size 126 x 102 mm with 72 mm total depth for planning cutouts and clearance behind the panel\u003c\/li\u003e\n\u003cli\u003eGrey technopolymer body suited to damp locations when installed as part of an IP55 cover assembly\u003c\/li\u003e\n\u003cli\u003eFlush mounting keeps the device station low-profile and reduces snag points in tight passages and cockpits\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mounting box is built around a 3-module layout, so it is meant for a 3-module protected cover and matching 3-module device arrangement. If you are replacing a box behind an existing watertight cover, confirm the cover part number and the module count before cutting or ordering.\u003c\/p\u003e\u003cp\u003eThe IP55 protection level depends on the complete assembly and the way it is installed. The cover, its seal, and the wall surface all matter for keeping spray out.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003ePlan the cutout so the box sits square in the bulkhead, with enough rear clearance for the 72 mm depth plus wiring bend radius. In marine panels with core material, seal exposed core at the cut edges to help keep moisture from wicking into the laminate.\u003c\/p\u003e\u003cp\u003eRoute cables so they enter cleanly and stay strain-relieved inside the box. A simple drip loop and tidy wire routing go a long way toward keeping the inside dry and making future service easier.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis is a practical choice for a three-module protected station in spots like a cockpit switch bank, an exterior bulkhead near the helm, or a damp utility space where a standard interior box is more likely to see spray. It suits boats already using the Vimar protected cover system and needing a recessed box that matches that 3-module format.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine checks, inspect the cover seal area for grit and salt buildup and clean it before it gets pressed into the sealing surface. If the station is exposed to regular washdowns, a quick rinse and wipe helps keep the cover and sealing surfaces working as intended.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268880036021,"sku":"QBP141475","price":13.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1297906_qbp141475.jpg?v=1771540613"},{"product_id":"qbp192842","title":"Vimar Eikon Square Cover Plate, 14-Module, White Technopolymer","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20660.01 is a 14-module Eikon square cover plate made from white technopolymer, sized 206 x 152 mm with a 10.5 mm depth.\u003c\/p\u003e\u003cp\u003eIt finishes a larger Vimar modular switching station by covering the mounting frame and the cutout edges around the modules, leaving a border that looks clean and stays even around your switches, outlets, and chargers.\u003c\/p\u003e\u003cp\u003eOn boats it is commonly used for helm switch banks and cabin lighting panels where several functions are grouped in one place and you want a single faceplate across the whole run.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e14-module cover plate for Eikon-format modular devices and matching frames\u003c\/li\u003e\n\u003cli\u003eWhite technopolymer (plastic) construction with a square bezel style\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 206 x 152 mm\u003c\/li\u003e\n\u003cli\u003eDepth: 10.5 mm\u003c\/li\u003e\n\u003cli\u003eHalogen-free material\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis plate is sized for a 14-module layout, so confirm the module count of the mounting frame behind your panel or wall opening before ordering.\u003c\/p\u003e\u003cp\u003eIt is meant for Vimar Eikon-style modular devices and frames rather than standard North American wall plates. For a clean fit, keep the plate, frame, and modules in the same system.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall after the devices are wired and secured in the mounting frame. Once the frame is straight and sitting flush to the surface, fit the cover plate over it and check that each module opening is centered.\u003c\/p\u003e\u003cp\u003eIn areas that see vibration and regular handling, take a moment to deburr the cutout and tuck wiring back so the plate can sit flat without rocking.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis cover plate suits refits and new builds that use a wider run of Vimar modules, such as grouped lighting controls at the companionway, a multi-function helm switch panel, or a cabin area combining switching with outlets or charging ports.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe with fresh water and a mild cleaner. Avoid harsh solvents that can haze or soften plastics.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268883017909,"sku":"QBP192842","price":57.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298044_qbp192842.jpg?v=1771540630"},{"product_id":"qbp193618","title":"Vimar Eikon Tactil Blank Module, 1 Module, Grey, Halogen-Free","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM21041 is a grey blank module for Eikon Tactil cover plates that closes an unused module position and keeps the panel looking finished. It uses halogen-free thermoplastic with an untreated matt surface, is colour-matched to RAL 7024 (similar), and has a device depth of 15.20 mm.\u003c\/p\u003e\u003cp\u003eOn a boat, this is the small part that cleans up an Eikon Tactil switch panel when you leave a spare slot for a future upgrade, remove a device, or need to blank off an opening on a multi-module cover plate. It is non-transparent and includes an information surface for simple identification when you are laying out circuits at the helm or in the cabin.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for Vimar Eikon Tactil modular cover plates as a blanking insert for unused module positions\u003c\/li\u003e\n\u003cli\u003eGrey, matt finish with RAL 7024 (similar) for consistent colour matching across the panel\u003c\/li\u003e\n\u003cli\u003eHalogen-free thermoplastic construction with untreated surface finishing\u003c\/li\u003e\n\u003cli\u003eNon-transparent front with an information surface for marking or identification\u003c\/li\u003e\n\u003cli\u003e15.20 mm device depth to help you confirm clearance behind the cover plate\u003c\/li\u003e\n\u003cli\u003eUseful for closing unused module spaces on cover plates with multiple module positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis blank module is intended for the Eikon Tactil range. If your existing plate and modules are from a different Vimar series, match the series first so the fit and finish stay consistent. It occupies a single module position and is used where there is an empty opening in the cover plate layout.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is the same type of mechanical fit used across the Eikon Tactil modular system. With the cover plate removed, the blank module is placed into the open module position, then the plate is refitted. No wiring or electrical connections are involved because it is a blanking component rather than an electrical device.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part makes the most sense when you are building an Eikon Tactil panel and want to keep a spare slot available, or when you need to close an unused opening so the panel stays tidy and easier to wipe down. It is also handy during refits when the final device layout is not locked in yet.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eClean with mild soap and water and avoid aggressive solvents that can haze or soften plastics. If the panel is in an exposed location, a quick rinse after salt spray helps keep the finish looking even with the rest of the switchgear.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268884328629,"sku":"QBP193618","price":4.58,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298045_qbp193618.jpg?v=1771540632"},{"product_id":"qbp194777","title":"Vimar Eikon LED Lamp 1M, 12V AC\/DC, IP40, White LED, Grey Module","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM20381.012 is a 1-module LED pilot lamp insert used with Vimar Eikon panels and devices to add a small status or locator light to a low-voltage circuit.\u003c\/p\u003e\u003cp\u003eIt supports 12 V AC (50-60 Hz) or 12 V DC (SELV) and snap-mounts into a flush-mounted module position behind the cover plate, so you can keep switch indication clean and consistent at the helm, nav station, or an interior electrical panel.\u003c\/p\u003e\u003cp\u003eWith an IP40 rating, it is meant for protected, dry locations. Keep it away from spray, washdowns, and any spot where water can reach the device box.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSupply: 12 V AC 50-60 Hz or 12 V DC (SELV) for common low-voltage onboard systems.\u003c\/li\u003e\n\u003cli\u003e1-module format for Vimar Eikon device grids and panel layouts.\u003c\/li\u003e\n\u003cli\u003eEngage (snap-in) fastening for flush-mounted installations.\u003c\/li\u003e\n\u003cli\u003eNon-replaceable LED light source to avoid bulb changes inside the panel.\u003c\/li\u003e\n\u003cli\u003eNo flashing function and no fixed symbol or imprint, keeping labeling up to the panel design.\u003c\/li\u003e\n\u003cli\u003eThermoplastic construction with an untreated, matte grey finish (RAL 7024 similar).\u003c\/li\u003e\n\u003cli\u003eIP40 rating for sheltered interior mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis is an Eikon 1-module insert, so it needs to be paired with compatible Eikon mounting hardware and a matching cover plate. It is intended to sit in a standard flush-mounted device box or panel cutout used for modular switchgear.\u003c\/p\u003e\u003cp\u003eIf you are mixing series or finishes on board, match the module family and faceplate style so the lamp lines up correctly with the rest of the panel.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eWire it on a protected 12 V circuit and treat it as a low-voltage indicator load. On DC systems, keep the feed within SELV practice and use appropriate overcurrent protection for the circuit in line with your vessel’s wiring standards.\u003c\/p\u003e\u003cp\u003eIf your boat uses a 12 V AC control feed from a transformer, the same module can be used on that 50-60 Hz supply.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the device box or panel frame first, make up the connections with enough slack for service, then snap the lamp insert into the 1-module position before fitting the cover plate. Confirm illumination and correct circuit behavior before final assembly.\u003c\/p\u003e\u003cp\u003eIn high-vibration areas, take care with wire routing and strain relief inside the box so the module is not carrying cable load.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis module is commonly used as a status indicator for switched circuits such as nav light controls, pump controls, or equipment enable switches where you want a quick visual check without adding a separate panel lamp.\u003c\/p\u003e\u003cp\u003eIt suits boats already using Vimar Eikon panels and owners who want consistent, low-voltage indication in interior spaces that stay dry.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eWipe the front gently with a soft cloth and keep the device area dry. If the LED stops lighting, the module is replaced as a complete insert rather than servicing a bulb.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268885016757,"sku":"QBP194777","price":57.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298049_qbp194777.jpg?v=1771540635"},{"product_id":"qbp195737","title":"Vimar Isoset Surface Enclosure, For Eikon \u0026 Plana, 4M 2x2, IP40","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14812 is an IP40 surface-mount enclosure that holds a 4-module (2+2) layout for Vimar Eikon and Plana devices. It measures 13.6 x 8.3 x 5.5 cm, is made from grey plastic, and has a listed weight of 98.88 g.\u003c\/p\u003e\u003cp\u003eIt gives you a clean way to mount switches, sockets, or controls on a bulkhead or interior panel when you do not want to cut a recessed opening. The enclosure can be installed horizontally or vertically, so it is easier to match the layout of your helm, nav station, or cabin panels.\u003c\/p\u003e\u003cp\u003eIP40 covers protection from solid objects, but it does not add water sealing. On boats, it makes the most sense in dry, sheltered areas rather than exposed cockpits, open decks, or washdown zones.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e4 (2+2) module capacity for Vimar Eikon and Plana series devices\u003c\/li\u003e\n\u003cli\u003eSurface-mount format for refits and installations where flush mounting is not practical\u003c\/li\u003e\n\u003cli\u003eHorizontal or vertical mounting to suit the panel layout\u003c\/li\u003e\n\u003cli\u003eIP40 protection for interior locations where spray and washdowns are not expected\u003c\/li\u003e\n\u003cli\u003eGrey plastic enclosure that avoids corrosion concerns that can come with metal boxes in damp spaces\u003c\/li\u003e\n\u003cli\u003eFull insulating materials included for an insulated enclosure build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is sized for a 2x2 arrangement of two-module positions, for a total of four modules. Match the modules and front components to the Eikon or Plana family you are installing, and confirm the module count and layout before cutting or drilling your mounting surface.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the box on a flat, solid surface where the wiring can be routed without tight bends or chafe points. If you are installing it on a boat, place it where it will not be hit by direct spray, and leave enough room around the enclosure to access the modules and fasteners during service.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis enclosure is a good fit for cruisers and workboats doing interior electrical refits, especially when adding controls at a nav station, inside a console, or along cabin bulkheads. It is also useful when you need a neat surface installation on liners or panels where a recessed cut-out would weaken the structure or expose hidden voids.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268885606581,"sku":"QBP195737","price":8.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298053_qbp195737.jpg?v=1771540639"},{"product_id":"qbp306260","title":"Vimar Arké 2-Module Panel Mounting Frame, With Screws","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM19627 is a 2-module mounting frame with screws for panel mounting.\u003c\/p\u003e\u003cp\u003eIt gives you a solid fixing point when you want to install a Vimar ARKÉ 2-module device on a flat panel instead of a standard wall box, such as a helm switch panel, console fascia, or a cabinet face. The frame sits behind the cut-out and holds the device and cover plate square so it does not work loose with vibration.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-module (2M) format for Vimar ARKÉ modular devices used in panel installations\u003c\/li\u003e\n\u003cli\u003eSupplied with screws to fasten the frame to the panel\u003c\/li\u003e\n\u003cli\u003eRear support for a front-installed device through the panel opening\u003c\/li\u003e\n\u003cli\u003eScrew fixing that helps keep the assembly steady on boats that see shock and vibration\u003c\/li\u003e\n\u003cli\u003eBuilt for ARKÉ panel-mount assemblies that use a 2-module opening and matching cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis frame is for the ARKÉ modular system in the 2-module width. Before ordering, confirm your device is an ARKÉ item that uses the 2-module format and that your panel cut-out and cover plate are sized for a 2-module opening.\u003c\/p\u003e\u003cp\u003eIf your installation uses a flush-mount electrical box, a different Vimar series, or a different module count, use the corresponding frame for that format instead.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the frame behind the panel, align it with the cut-out, and secure it using the included screws. Install the 2-module device from the front, then finish with the matching panel-mount cover plate. Leave enough clearance behind the panel for wiring bends and strain relief, especially on vibrating helm and console locations.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon installs include helm switch banks, accessory panels at the nav station, cabin control panels, and locker or bulkhead panels where you want a clean, serviceable mount for ARKÉ modular devices. It is a good match for refits and new builds that use custom panels and need a consistent 2-module mounting pattern.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268891275445,"sku":"QBP306260","price":11.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298121_qbp306260.jpg?v=1771540661"},{"product_id":"qbp306980","title":"Vimar Arké 2-Central-Module Mounting Frame With Screws, For 60 mm or 56x56 mm Mounting Boxes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM19612 is a 2-central-module mounting frame with screws, made to mount compatible Vimar modular devices in a 3-module opening and align with 60 mm fixing centres or a 56 x 56 mm mounting box. It can be installed horizontally or vertically, which helps when you are matching existing plates and box orientation on board.\u003c\/p\u003e\u003cp\u003eThis support sits behind the front plate and gives you a stable fixing point for switches, outlets, or other modular inserts where you want a neat, serviceable finish in a cabin, nav station, or electrical panel. The semi-transparent body makes it easier to see alignment and wiring positions during fit-out.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-central-module support with fixing screws for secure mounting\u003c\/li\u003e\n\u003cli\u003eFits 3-module mounting frame layouts and boxes with 60 mm fixing centres or a 56 x 56 mm mounting box\u003c\/li\u003e\n\u003cli\u003eInstalls in horizontal or vertical orientation\u003c\/li\u003e\n\u003cli\u003eSemi-transparent frame helps with positioning and wiring visibility during installation\u003c\/li\u003e\n\u003cli\u003eHoneycomb structure adds stiffness while keeping the frame light\u003c\/li\u003e\n\u003cli\u003eCorner slots allow panel fixing; hooking teeth help when ganging multiple supports in a row\u003c\/li\u003e\n\u003cli\u003eCentral slots help level the support during final tightening\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mounting frame is intended for Vimar modular devices that use the 2-module central format within a 3-module space. Before ordering, confirm the module count of the devices and the box style already installed on the boat, especially the fixing-centre spacing and whether the opening is set up for a 3-module layout.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the frame to the box or panel using the fixing points provided on the support, then secure the inserts and front plate according to the device layout. When building multi-position switch banks, the frame features make it easier to keep adjacent supports aligned so the plates sit straight and the gaps stay even.\u003c\/p\u003e\u003cp\u003eAllow enough clearance behind the panel for wiring bends and strain relief, and tighten fasteners until snug without forcing the plastic.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMounting frame\u003c\/li\u003e\n\u003cli\u003eFixing screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis type of support is a good match for interior electrical points where you want a clean modular finish, such as lighting control panels, cabin outlets, or a nav-station switch group. For locations exposed to spray or washdowns, pair the installation with suitable protective enclosures and compatible devices for that environment.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eDuring routine checks, verify that mounting screws remain tight and that the frame is not under stress from cable pull or misalignment. If the area has seen salt exposure, a light fresh-water wipe-down around the installation helps reduce salt buildup behind trim plates.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268891537589,"sku":"QBP306980","price":6.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298125_qbp306980.jpg?v=1771540663"},{"product_id":"qbp397943","title":"Vimar IP55 3-Module Surface Enclosure, For Eikon Arké Plana, 3pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM14903 is a 3-module surface enclosure that gives Vimar Eikon, Arké, and Plana devices a protected mounting point in areas that see spray, washdowns, or general exposure on board. The enclosure carries an IP55 rating, so it is suited to installations where you want resistance to dust ingress and water jets with the cover closed.\u003c\/p\u003e\u003cp\u003eIt is a plastic housing with an overall size of 10.2 x 8.3 x 6.6 cm and a weight of about 0.124 kg, which helps when you are planning clearances on bulkheads, console faces, and cabin partitions. The electrical rating depends on the Vimar modules installed inside, since the enclosure itself is a protective body rather than an electrical component.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module surface enclosure for Vimar Eikon, Arké, and Plana wiring devices\u003c\/li\u003e\n\u003cli\u003eIP55 protection for installations that need resistance to dust ingress and water jets with the cover closed\u003c\/li\u003e\n\u003cli\u003eOverall size of 10.2 x 8.3 x 6.6 cm for practical clearance checks behind panels and in lockers\u003c\/li\u003e\n\u003cli\u003ePlastic construction with a fully insulated enclosure body\u003c\/li\u003e\n\u003cli\u003eSurface-mount format for refits where you do not want to cut in a flush box\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis enclosure is sized for 3-module Vimar devices and cover plates in the Eikon, Arké, and Plana families. If your current installation uses a different module standard or a wider multi-gang plate, confirm the module format before ordering.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount it on a flat, solid surface where the cover can open freely and close without interference from trim, handrails, or coamings. Bring wiring in through a properly sealed cable entry so the protection level is not compromised after installation. In wet zones, keep terminations tidy, support the cable to reduce vibration strain, and use sealed connectors where appropriate for the location.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis enclosure is a good match for cockpit and deck-adjacent control points, transom lockers, and other spots where a switch or socket needs extra protection from splash and washdowns. It also fits cleanly in refit work where surface mounting avoids major cutouts in thin liners or molded panels.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003e3 x 3-module IP55 surface enclosures\u003c\/li\u003e\u003c\/ul\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268924141749,"sku":"QBP397943","price":13.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298310_qbp397943.jpg?v=1771540855"},{"product_id":"qbp396067","title":"Vimar Flush Mounting Box, For Panel Mounting Frames, 1-Module, Black, GW 960C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16776.AU is a 1-module flush mounting box for panel installations where you need a clean opening and a protected cavity behind the faceplate. It is black, uses halogen-free plastic, and carries a glow wire flammability rating of 960 C with an IP40 degree of protection.\u003c\/p\u003e\u003cp\u003eThe body measures 54 x 29 mm, with depth up to 42.2 mm (36.2 mm internal depth), which helps when you are working behind helm switch panels, nav stations, and interior bulkheads where space is tight but wiring still needs room to sit naturally.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1-module box format for panel mounting frames and one electrical fitting\u003c\/li\u003e\n\u003cli\u003eOverall size 54 x 29 mm; depth up to 42.2 mm (36.2 mm internal depth) to help confirm clearance behind the panel\u003c\/li\u003e\n\u003cli\u003eThree rear break-out cable entries with rear inlet routing\u003c\/li\u003e\n\u003cli\u003eSupports 20 or 25 mm tube size and cable up to 25 mm diameter\u003c\/li\u003e\n\u003cli\u003eIP40 protection level for protected interior installations\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic construction with glow wire flammability rating of 960 C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eBefore cutting, check both the available depth and how your conductors will route into the back of the box. The rear entries are made for break-out feed-throughs, so you can bring wiring in cleanly and keep bends gentle rather than forcing tight turns behind the module.\u003c\/p\u003e\u003cp\u003eOn a boat, vibration and service access matter as much as the cutout. Leave enough slack to pull the device forward for inspection, and secure wiring so the terminals are not taking the load when the hull is moving.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is sized for a single 1-module Vimar Idea panel installation and the matching panel-mount frame. Confirm the device family you are using is the 1M format before committing to the panel opening.\u003c\/p\u003e\u003cp\u003eWith an IP40 rating, it belongs in protected locations such as the cabin, inside a console, or behind a sheltered helm panel, rather than areas exposed to direct spray or washdowns.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268952060085,"sku":"QBP396067","price":3.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298281_qbp396067.jpg?v=1771541010"},{"product_id":"qbp396991","title":"Vimar Round Hollow-Wall Flush-Mount Box, 68 mm Cutout, Light Blue","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71701 is a round flush-mount box in light blue for fitting Vimar modular devices into hollow wall panels on board. It installs into a 68 mm cutout and supports a two-device arrangement while keeping wiring tucked behind the wall surface.\u003c\/p\u003e\u003cp\u003eThe body measures about 71.5 mm across with about 50 mm of internal depth, and it uses metal fins to clamp onto panels from 1 to 38 mm thick. Breakout entries are set up for 16 mm, 20 mm, or 25 mm conduit, and a centring plate on the rear helps keep the hole saw lined up when you are working on cabin liners, bulkheads, or console faces.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e68 mm hole-saw cutout size for standard round hollow-wall installs\u003c\/li\u003e\n\u003cli\u003eMetal fins secure the box on wall thicknesses from 1 to 38 mm\u003c\/li\u003e\n\u003cli\u003eBreakout conduit entries for 16 mm, 20 mm, and 25 mm runs\u003c\/li\u003e\n\u003cli\u003eAbout 50 mm internal depth behind the panel for terminations\u003c\/li\u003e\n\u003cli\u003eEight entry points to route cable or conduit from the most practical direction\u003c\/li\u003e\n\u003cli\u003eMetal lugs for the support screws that hold the mounting frame\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic with a glow-wire rating of 850 C\u003c\/li\u003e\n\u003cli\u003eIP00 and not sealable, so it belongs in protected interior spaces unless the front device assembly provides the needed sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eCut a clean 68 mm opening, feed wiring or conduit through the chosen knockouts, and seat the box until the front lip sits flush. Tighten the metal fins evenly so they bite behind the panel without distorting thin liners. Once the box is fixed, the mounting frame can be secured using the metal lugs, then the devices and cover plate are fitted from the front.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for Vimar supports that mount without claw clips and rely on screw fixing instead. It is used when you need a recessed mounting point in a hollow wall and want a neat finish that keeps the device aligned and stable.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eIt is commonly used for interior switching and outlets in cabins, saloons, nav stations, and helm consoles where the structure is a hollow panel rather than solid timber. It also suits refits where you are standardizing on Vimar modular devices and want consistent mounting depth and cutout sizing across multiple stations.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268954976437,"sku":"QBP396991","price":6.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298295_qbp396991.jpg?v=1771541037"},{"product_id":"qbp397109","title":"Vimar 3-Module Flush-Mount Box, For Eikon\/Idea\/Arke\/Plana, For Hollow Walls, Light Blue, 68 mm Cutout, Glow Wire 850C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71703 is a 3-module flush-mount box for hollow walls, used when you need to mount Vimar modular switches or outlets in a thin interior panel on a boat.\u003c\/p\u003e\u003cp\u003eIt installs in a 68 mm cut-out and uses metal fins to clamp securely to wall thicknesses from 1 to 38 mm. Improved retention knockouts accept conduit runs in 16, 20, or 25 mm sizes, and a centring plate on the back helps keep the hole layout aligned when you are working on finished liners or cabinetry panels.\u003c\/p\u003e\u003cp\u003eThe body is halogen-free plastic with a GW 850 °C glow-wire rating. It is not a sealed enclosure (IP00), so it belongs in protected areas behind a finished plate or inside interiors rather than in places that see direct spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e3-module box for hollow-wall installations, in light blue\u003c\/li\u003e\n\u003cli\u003e68 mm hole-saw cut-out with a built-in centring plate for cleaner alignment\u003c\/li\u003e\n\u003cli\u003eMetal fins clamp to panel thicknesses from 1 to 38 mm\u003c\/li\u003e\n\u003cli\u003eRetention knockouts for conduit sizes 16, 20, or 25 mm\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body with GW 850 °C glow-wire rating\u003c\/li\u003e\n\u003cli\u003eIP00 rating, intended for dry, protected mounting locations\u003c\/li\u003e\n\u003cli\u003eCan be coupled for side-by-side installations when building multi-gang runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is sized for Vimar 3-module mounting frames commonly used with Vimar modular device ranges such as Idea, Eikon, Eikon-Evo, and Arke. The rectangular body sits behind the finished plate, while the 68 mm cut-out and clamping fins handle the mechanical hold in hollow panels.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMark the cut-out, drill with a 68 mm hole saw, and clean up the edge so the box seats flat. Feed your wiring or conduit through the appropriate knockouts, insert the box, and tighten the fins until it is firm without crushing the panel. Once the mounting frame and devices are in place, give the assembly a final check for movement before fitting the cover plate.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis is a good match for refits and new builds where you are adding Vimar controls to cabin bulkheads, liners, nav stations, galleys, and other interior panels that are too thin for solid-wall boxes. If the location sees moisture, plan protection at the faceplate level and keep the box itself out of direct spray.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter the first few trips, re-check the clamping fins and device screws for tightness, especially on boats that see vibration and pounding. If you open the plate later for service, inspect the cable entries and knockouts to make sure wiring stays supported and not pinched.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268956287157,"sku":"QBP397109","price":4.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298300_qbp397109.jpg?v=1771541052"},{"product_id":"qbp397275","title":"Vimar Hollow-Wall Flush-Mount Box, 6\/7-Module, 68 mm Cutout, GW 850°C","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VMV71706 is a 6 to 7-module flush-mount box for hollow walls, sized to hold up to 7 modular electrical devices behind a finished panel.\u003c\/p\u003e\u003cp\u003eThe cutout pattern is laid out around a 68 mm hole saw, which helps get a clean opening in materials like plasterboard and similar thin panels. With a 50 mm internal depth and an overall footprint of 193 mm by 72.5 mm, it gives you workable space for wiring while staying tidy behind liners and console panels.\u003c\/p\u003e\u003cp\u003eIt uses halogen-free plastic and carries a glow-wire rating of 850 °C. The box is rated IP00, so it belongs in dry, protected locations rather than anywhere that sees spray or washdowns.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e6 to 7-module in-line box for hollow walls, supports up to 7 device positions\u003c\/li\u003e\n\u003cli\u003eHole preparation uses a 68 mm hole saw, with a centring plate on the back to help line things up\u003c\/li\u003e\n\u003cli\u003eMetal fins clamp to panel thicknesses from 1 to 38 mm for a firm hold in liners and bulkheads\u003c\/li\u003e\n\u003cli\u003eBreak-out openings for conduit or sleeving in 16, 20, or 25 mm sizes, with 18 entry points total\u003c\/li\u003e\n\u003cli\u003eMetal screw lugs for mounting device supports by screwing\u003c\/li\u003e\n\u003cli\u003eHalogen-free plastic body with glow-wire rating 850 °C; IP00 for dry, protected installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMark the hole pattern using the rear centring plate, drill with a 68 mm hole saw, then finish the opening so the box sits flat against the panel surface.\u003c\/p\u003e\u003cp\u003eBring wiring or conduit in through the break-outs, position the box, and tighten the metal fins until the box is secure. Plan for service access by leaving enough slack inside the 50 mm cavity to remove devices later without pulling on the conductors.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis box is intended for installations that use a 6 to 7-module in-line support that screws to the box. Confirm the device support and faceplate you plan to use are sized for up to 7 modules and match the fixing points.\u003c\/p\u003e\u003cp\u003eBecause it is a hollow-wall box, it works best where there is a void behind the surface, such as cabin liners, furniture panels, and lightweight bulkheads.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eCommon onboard locations include cabin bulkheads, nav stations, galley panels, and helm consoles where you want a flush bank of switches or outlets without adding a surface box.\u003c\/p\u003e\u003cp\u003eIt is a good match for refits and new builds that route wiring in conduit behind interior liners. For damp areas, keep the installation behind a sealed front assembly and away from direct spray, since the box itself is IP00.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268960383157,"sku":"QBP397275","price":11.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298305_qbp397275.jpg?v=1771541069"},{"product_id":"qbp418486","title":"Vimar Idea Universal Master Rotary Dimmer, 120VAC, 200W LED\/CFL","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe Vimar VM16603.120.B is a 120 V~ 60 Hz rotary MASTER dimmer for controlling compatible AC lighting on board, with a white finish and a plastic body.\u003c\/p\u003e\u003cp\u003eIt supports 40-500 W incandescent loads, 40-300 VA electronic transformers, 10-200 W dimmable CFL loads, and 3-200 W dimmable LED loads. On and off is handled by the built-in push button, while the rotary knob sets the light level and allows a minimum brightness setting so lamps do not drop out at the low end.\u003c\/p\u003e\u003cp\u003eThis is an AC dimmer intended for interior lighting circuits fed by shore power or an inverter. It is not for 12 V or 24 V DC lighting.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e120 V~ 60 Hz phase-cut dimming with leading-edge or trailing-edge mode selection (LE\/TE).\u003c\/li\u003e\n\u003cli\u003eRated load ranges: 40-500 W incandescent, 40-300 VA electronic transformers, 10-200 W dimmable CFL, 3-200 W dimmable LED.\u003c\/li\u003e\n\u003cli\u003eBuilt-in push button for ON\/OFF with rotary potentiometer dimming.\u003c\/li\u003e\n\u003cli\u003eSupports control from normally-open peripheral push buttons wired in parallel (avoid push buttons with pilot lights).\u003c\/li\u003e\n\u003cli\u003eMASTER-SLAVE function supports up to 3 SLAVE devices when configured as the MASTER, with system load limits that depend on lamp type.\u003c\/li\u003e\n\u003cli\u003eSoft start and soft end behavior, plus flash start support for CFL loads.\u003c\/li\u003e\n\u003cli\u003eShort-circuit and overheating protection with a flashing indicator.\u003c\/li\u003e\n\u003cli\u003eVisible in darkness for easier night adjustments; not suitable for Isoset enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis dimmer is meant for 120 V AC lighting circuits. All connected lamps and drivers must be marked dimmable, and when multiple lamps are controlled together they should be the same type so the dimming response stays consistent.\u003c\/p\u003e\u003cp\u003eCheck each lamp or driver for the recommended dimming method: LE (leading edge) or TE (trailing edge). Where the load supports both, selecting the mode that matches the lamp is the usual way to reduce flicker and nuisance shutoff.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eTypical installs use a 3-wire connection with neutral present at the device. In retrofit situations where neutral is not available in the box, a 2-wire setup is possible but requires an adapter load installed close to the lamp and wired in parallel.\u003c\/p\u003e\u003cp\u003eFor multi-point switching, use normally-open push buttons in parallel and keep control wiring between the dimmer and the push buttons, or between MASTER and SLAVE devices, within 100 m.\u003c\/p\u003e\u003cp\u003eProtect the circuit with a quick-acting 5 A fuse (F5AH, 250 V~) upstream of the dimmer, and treat installation like any other 120 V AC onboard work: isolate power at the breaker, verify with a meter, and secure conductors so vibration does not loosen connections.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis dimmer fits boats that run 120 V AC cabin lighting and want a knob you can find and adjust in the dark, such as in a salon, stateroom, or galley. It is specified for dry, dust-free locations from 0 C to +35 C, so it belongs in interior spaces rather than cockpits, wet heads, or areas that see washdowns.\u003c\/p\u003e","brand":"Vimar","offers":[{"title":"Default Title","offer_id":52268997181621,"sku":"QBP418486","price":106.4,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1298326_qbp418486.jpg?v=1771541370"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/1279293_vimar.webp?v=1768106338","url":"https:\/\/www.qualityboatparts.com\/collections\/vimar.oembed","provider":"Quality Boat Parts","version":"1.0","type":"link"}