{"title":"TACO Marine","description":"","products":[{"product_id":"qbp914916","title":"TACO Marine Tele-Sun Shade Poles, Carbon Fiber, 52.89-80.4 in, 1\/4 in Pin, 2pk, Mesh Carry Bag","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-7005CF is a pair of carbon fiber Tele-Sun shade poles for creating removable sun coverage from existing deck-mounted rod holders. Each pole telescopes from 52.89 in. to 80.4 in., giving boat owners a practical way to support shade fabric at the cockpit, bow, stern, or sandbar setup without adding a fixed frame.\u003c\/p\u003e\u003cp\u003eThe carbon fiber tubes keep handling and stowage manageable, while the clear Awl Grip UV-protection helps the poles stand up to exposure on deck. The system uses a 1\/4 in. rod holder pin, a 1\/4 in. rope diameter, a 1-1\/2 in. main tube, and a 1-1\/4 in. inner tube. It fits deck-mounted rod holders with a 1-1\/2 in. inside diameter.\u003c\/p\u003e\u003cp\u003eThese poles are made for boaters who want shade that can be deployed when needed and stored when the day is done. Canvas or shade fabric and the 10 degree flush mount rod holder are not included, so those parts should be matched to the boat and installation layout before setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair of telescoping carbon fiber shade poles for removable boat shade setups.\u003c\/li\u003e\n\u003cli\u003eExtends from 52.89 in. to 80.4 in. to help position shade fabric over the cockpit, bow, stern, or lounging area.\u003c\/li\u003e\n\u003cli\u003eClear Awl Grip UV-protection on the carbon fiber material helps with long days of deck exposure.\u003c\/li\u003e\n\u003cli\u003eInstalls into deck-mounted rod holders using a 1\/4 in. pin.\u003c\/li\u003e\n\u003cli\u003eWorks with rod holders that have a 1-1\/2 in. inside diameter.\u003c\/li\u003e\n\u003cli\u003eCam cleat allows line tension to be adjusted after the shade fabric is attached.\u003c\/li\u003e\n\u003cli\u003eOpen hood gives another way to clamp fabric using a bungee cord system.\u003c\/li\u003e\n\u003cli\u003eLocking mechanism and 360 degree swivel collar support practical positioning while setting the shade.\u003c\/li\u003e\n\u003cli\u003eMesh carrying bag helps keep the poles together and protected during storage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSetup is straightforward when the boat already has the right rod holders in place. Insert the poles into the rod holders, secure the sun-protection fabric to the boat top, connect the fabric to the poles, and extend the poles until the fabric sits in the needed position.\u003c\/p\u003e\u003cp\u003eThe cam cleat is useful once the fabric is in place because it lets the line tension be adjusted without rebuilding the setup. For boats that use a different fabric attachment approach, the open hood feature supports a bungee cord clamping method.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis shade pole pair is intended for deck-mounted rod holders with a 1-1\/2 in. inside diameter. The 10 degree flush mount rod holder and the canvas material are separate items, so the rod holder angle, deck location, and fabric layout should be checked against the boat before installation.\u003c\/p\u003e\u003cp\u003eThe poles can be used toward the front or rear of the boat, depending on the rod holder placement and where shade is needed. They are a good match for center consoles, fishing boats, day boats, and cruising setups where removable shade is more useful than a permanent structure.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the poles with fresh water after use around spray or sand, then let them dry before placing them back in the mesh carrying bag. Before each setup, check the rod holder fit, pin engagement, line tension, and fabric attachment points so the shade system is secure before the boat gets underway or conditions change.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of carbon fiber Tele-Sun shade poles\u003c\/li\u003e\n\u003cli\u003eMesh carrying bag\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071047861,"sku":"QBP914916","price":1789.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331828_qbp914916.jpg?v=1780191653"},{"product_id":"qbp253003","title":"TACO Marine Flush Mount Rod Holder, 10 Degree, Aluminum, Round Flange, 5-1\/2 in Tube","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-0702BXY is a 10° flush mount rod holder with a round flange, aluminum construction, and a deluxe anodized finish for clean installation on fishing boats. Its 5-1\/2\" tube section gives the rod butt a secure pocket below the deck surface, while the angled layout keeps the rod positioned naturally along a gunwale or leaning post.\u003c\/p\u003e\u003cp\u003eThis rod holder is built for everyday rod storage and trolling setups where a flush look matters and deck space needs to stay usable. A welded I-beam seats the rod butt, and the welded pin design adds strength at the contact point inside the tube. It can also be used with compatible TACO Carbon Fiber Tele-Sun Shade Pole setups when the installation calls for a deck-mounted support point.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e10° flush mount layout helps angle the rod outward from the gunwale or leaning post.\u003c\/li\u003e\n\u003cli\u003eRound flange gives the installation a clean finished edge on the mounting surface.\u003c\/li\u003e\n\u003cli\u003eAluminum construction with deluxe anodized finish suits visible cockpit and fishing-area installations.\u003c\/li\u003e\n\u003cli\u003e5-1\/2\" tube section supports the rod butt below the deck surface.\u003c\/li\u003e\n\u003cli\u003eWelded I-beam helps keep the rod butt seated while underway or while fishing.\u003c\/li\u003e\n\u003cli\u003eWelded pin design adds support inside the holder.\u003c\/li\u003e\n\u003cli\u003eForm-fitted white PVC liner helps protect the rod handle and reduces direct contact with the aluminum tube.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a flush mount rod holder, so the boat must have the correct mounting location, clearance below the surface, and structure to support the rod load. It is commonly suited to gunnels and leaning posts where the tube can drop below the top surface without interfering with wiring, plumbing, flotation, or other hardware.\u003c\/p\u003e\u003cp\u003eBefore cutting or replacing an existing holder, check the available depth for the 5-1\/2\" tube section and confirm that the 10° angle works with the rod spread and nearby hardware. On cored fiberglass surfaces, seal the exposed core properly during installation to help keep water out of the laminate.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis holder is a good match for anglers who want a fixed rod position that stays low-profile when not in use. It works well in fishing areas where removable clamp-on holders would be in the way, and it keeps the cockpit or gunwale area tidy for coastal fishing, offshore runs, and dockside rod storage.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFlush mount 10° rod holder\u003c\/li\u003e\n\u003cli\u003eForm-fitted white PVC liner\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071080629,"sku":"QBP253003","price":84.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331495_qbp253003.jpg?v=1780191653"},{"product_id":"qbp529909","title":"TACO Marine ShadeFin Fixed Rod Holder Mount, For Standard Rod Holders, Type-304 Stainless Steel, Nylon Sleeve, Locking Knob","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-5 is a fixed rod holder mount for attaching a ShadeFin shade system to a compatible boat rod holder. It is made from high-polished Type-304 stainless steel and uses a locking knob, nylon sleeve, self-aligning notch, and pin-locking hole to help keep the ShadeFin connection secure while the boat is at rest or underway in normal operating conditions.\u003c\/p\u003e\u003cp\u003eThis mount is mainly suited for firmly welded T-top rod holders. It can also be used with a gunnel rod holder when the proper adapter is used, or with the Telescopic Rod Holder Accessory when that separate accessory is part of the setup. For owners adding portable shade to a center console, fishing boat, or cruiser, it gives the ShadeFin a fixed mounting point without adding a permanent deck or hardtop bracket.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFixed mount for TACO Marine ShadeFin systems using compatible rod holder locations on board\u003c\/li\u003e\n\u003cli\u003eFits standard T-top rod holders when the rod holder is firmly welded and able to accept the mount\u003c\/li\u003e\n\u003cli\u003eHigh-polished Type-304 stainless steel construction for a clean finish in exposed marine spaces\u003c\/li\u003e\n\u003cli\u003eLocking knob helps secure the mount in the rod holder once the butt end is seated\u003c\/li\u003e\n\u003cli\u003eNylon sleeve helps reduce movement when the rod holder opening is larger than the mount shaft\u003c\/li\u003e\n\u003cli\u003eGimbal-slot butt end mates with the rod holder pin for proper seating\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help guide and retain the ShadeFin mounting post\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe mount is intended for use with ShadeFin and a suitable rod holder location. In a T-top installation, the rod holder should be firmly welded before the ShadeFin is mounted. For gunnel rod holder installations, the correct adapter is required so the mount is seated properly and the threads are not damaged.\u003c\/p\u003e\u003cp\u003eThe fit depends on the rod holder opening, the internal gimbal pin, and the ability to tighten the locking knob at the bottom of the mount. The included nylon sleeve is useful where the rod holder opening has extra clearance around the mount shaft, helping take up space and reduce unwanted movement.\u003c\/p\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation starts by removing the locking knob, placing the beveled nylon sleeve on the mount leg, and sliding the gimbal butt end into the rod holder so it engages with the rod holder pin. Once the sleeve is seated, the locking knob is tightened until the mount has no wiggle room.\u003c\/p\u003e\u003cp\u003eAfter the mount is secured in the rod holder, the ShadeFin mounting post slides into the open end of the mount. The alignment pin guides the post into position, and the locking pin should pass through the locking hole before the ShadeFin is opened.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis mount is a practical match for boaters who already have a suitable rod holder and want a removable shade position without drilling a new permanent mount into the deck, gunwale, or hardtop. It works well for adding shade over a cockpit, helm area, fishing station, or lounging space where the ShadeFin location lines up with an existing rod holder.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the mount with fresh water and wipe away salt around the locking knob, sleeve, and pin-locking area. Keeping the sleeve clean and checking that the locking knob turns freely will make setup easier and help the mount seat properly each time it is used.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071244469,"sku":"QBP529909","price":294.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331499_qbp529909.jpg?v=1780191653"},{"product_id":"qbp593845","title":"TACO Marine ShadeFin Adjustable Rod Holder Mount, 316L SS, 15-Degree Detents","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-6 is an adjustable rod holder mount for adding a ShadeFin shade setup to a boat through an existing rod holder. It gives boaters a practical way to position shade over the helm, cockpit, or fishing area without committing to a fixed shade frame.\u003c\/p\u003e\u003cp\u003eThe mount is made from Type-316L stainless steel with a high polish finish and works with the ShadeFin system and 1-1\/8-inch diameter outrigger poles. It seats into a standard T-top rod holder, using a gimbal-slot butt end, nylon sleeve, and locking knob to help keep the mount stable in normal boat use.\u003c\/p\u003e\u003cp\u003eAngle adjustment is handled with a Sure-Grip knob, with safety detents every 15 degrees so the shade can be set higher or lower as the sun moves. This is useful on center consoles, fishing boats, and other vessels where shade needs to move with the crew rather than stay in one fixed position.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eAdjustable rod holder mount for TACO Marine ShadeFin shade systems\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction with a high polish finish for exposed marine locations\u003c\/li\u003e\n\u003cli\u003eFits standard T-top rod holders and can also be used with compatible gunnel rod holder accessories sold separately\u003c\/li\u003e\n\u003cli\u003ePairs with ShadeFin and 1-1\/8-inch diameter outrigger poles\u003c\/li\u003e\n\u003cli\u003eSure-Grip knob allows controlled shade angle adjustment by hand\u003c\/li\u003e\n\u003cli\u003eSafety detents every 15 degrees help hold the selected angle during use\u003c\/li\u003e\n\u003cli\u003eGimbal-slot butt end mates with the rod holder gimbal pin for proper seating\u003c\/li\u003e\n\u003cli\u003eNylon sleeve adds stabilization when the rod holder opening is larger than the mount shaft\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help the mount sit securely in the holder\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstall the mount by inserting it into a firmly welded T-top rod holder and checking that the gimbal slot is properly engaged with the rod holder pin. The included nylon sleeve can be used when the rod holder opening needs additional support around the mount shaft.\u003c\/p\u003e\u003cp\u003eOnce the mount is seated, the locking knob secures it in place. The ShadeFin can then be inserted and adjusted with the Sure-Grip knob until the shade angle matches the sun position and the area being covered.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for use with the TACO Marine ShadeFin system rather than as a fishing rod holder. It is a good match for boats that already have a suitable T-top rod holder and need portable shade over a helm seat, leaning post, cockpit station, or fishing position.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm that the rod holder is firmly mounted and positioned where the ShadeFin can open without interfering with antennas, outriggers, electronics, canvas, or crew movement. For gunnel-mounted use, a compatible adapter or telescopic rod holder accessory is required.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe adjustable layout works well for boaters who need shade that can shift throughout the day, especially during coastal cruising, dockside time, sandbar stops, and long fishing sessions. The stainless steel build and rod holder installation style make it practical for open boats where sun coverage needs to be added without taking up permanent deck space.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071277237,"sku":"QBP593845","price":469.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331514_qbp593845.jpg?v=1780191654"},{"product_id":"qbp665998","title":"TACO Marine ShadeFin Adjustable Clamp-On Pipe Mount, 316L Stainless Steel, 3\/4 in or 1 in Pipe, 1-1\/4 in Tube","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-7 is an adjustable clamp-on pipe mount for securing a ShadeFin shade system on boats that do not have an open rod holder available. It fits 3\/4 inch or 1 inch schedule-40 pipe, as well as 1-1\/4 inch O.D. tube, making it useful on many hardtops, T-tops, rails, tower legs, and other round-tube mounting points.\u003c\/p\u003e\u003cp\u003eThe mount gives the ShadeFin a stable attachment point while still letting the user change the shade angle on the water. Adjustment is handled with a soft-touch knob, and the mount indexes every 15 degrees with safety detents so the ShadeFin can be aimed where coverage is needed as the sun moves.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 3\/4 inch or 1 inch schedule-40 pipe and 1-1\/4 inch O.D. tube for use on common boat rail and top structures.\u003c\/li\u003e\n\u003cli\u003eMade from Type-316L stainless steel with a high-polish finish for exposed marine mounting locations.\u003c\/li\u003e\n\u003cli\u003eAngle adjustment every 15 degrees helps position the ShadeFin for changing sun direction during the day.\u003c\/li\u003e\n\u003cli\u003eSoft-touch knob allows on-board adjustment without needing tools for routine repositioning.\u003c\/li\u003e\n\u003cli\u003eSafety detents help hold the selected angle once the ShadeFin is set.\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help the ShadeFin seat correctly in the mount.\u003c\/li\u003e\n\u003cli\u003eUseful for boats with limited rod holders or for installations where the available rod holders are already being used for fishing gear.\u003c\/li\u003e\n\u003cli\u003eBacked by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount clamps directly to compatible round pipe or tube, so it is a practical option when adding ShadeFin coverage to a cockpit, helm area, bow seating zone, or aft deck without drilling into a rod holder location. Before purchase, the pipe or tube diameter should be checked carefully against the supported sizes: 3\/4 inch schedule-40 pipe, 1 inch schedule-40 pipe, or 1-1\/4 inch outside-diameter tube.\u003c\/p\u003e\u003cp\u003eBecause the mount carries a shade accessory, the selected location should be a solid structural point with enough clearance for the ShadeFin to rotate and sit at the intended angle. On boats with T-tops or hardtop supports, the mount can help place shade where it is useful while keeping rod holders free for rods, flags, or other accessories.\u003c\/p\u003e\u003ch6\u003eMaterials and marine use\u003c\/h6\u003e\u003cp\u003eType-316L stainless steel is a strong match for exposed deck hardware, especially where salt spray, washdowns, and sun exposure are part of normal use. The high-polish finish also matches well with many stainless rail and top assemblies, which helps the mount look integrated rather than like an add-on.\u003c\/p\u003e\u003cp\u003eThis mount is a good fit for boat owners adding TACO Marine ShadeFin coverage to center consoles, fishing boats, cruisers, and day boats where fixed shade is limited or where flexible shade positioning matters during long hours on board.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071310005,"sku":"QBP665998","price":476.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331826_qbp665998.jpg?v=1780191654"},{"product_id":"qbp617302","title":"TACO Marine ShadeFin Fixed Clamp-On Mount, 3\/4 in or 1 in Pipe, 1-1\/4 in Tube, 316L SS","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-11 is a fixed clamp-on mount for attaching a ShadeFin to existing pipe or tube when the boat has limited rod-holder options. It fits 3\/4 inch or 1 inch schedule-40 pipe, as well as 1-1\/4 inch O.D. tube, making it useful on many T-tops and similar rail structures.\u003c\/p\u003e\u003cp\u003eThis mount is made from polished Type-316L stainless steel, a practical choice for hardware that lives around saltwater, spray, UV exposure, and regular washdowns. The fixed clamp-on layout keeps the ShadeFin attachment point simple, with a guide notch for accurate placement and a pin-locking hole to help keep the setup secure once installed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 3\/4 inch or 1 inch schedule-40 pipe and 1-1\/4 inch O.D. tube for use on compatible T-top piping and rail structures.\u003c\/li\u003e\n\u003cli\u003eFixed clamp-on format gives boats without a suitable rod holder a dedicated ShadeFin mounting point.\u003c\/li\u003e\n\u003cli\u003ePolished Type-316L stainless steel construction suits exposed marine locations where corrosion resistance matters.\u003c\/li\u003e\n\u003cli\u003eGuide notch helps position the ShadeFin accurately during setup.\u003c\/li\u003e\n\u003cli\u003eSelf-aligning notch and pin-locking hole help the mount stay properly located once the ShadeFin is installed.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and covered by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for compatible round pipe or tube, so the key fit check is the outside diameter and pipe type at the mounting location. Before installation, confirm that the chosen section of T-top piping or rail is straight, accessible, and clear of canvas, antennas, outriggers, rod holders, lights, and other hardware that could interfere with ShadeFin movement or coverage.\u003c\/p\u003e\u003cp\u003eBecause this is a fixed mount, placement matters. Mounting it where the ShadeFin can open cleanly and cast shade over the cockpit, helm, aft deck, or other active area will give the best result without adding unnecessary hardware to the boat.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis clamp-on mount is a good match for center consoles, bay boats, and fishing boats that use a ShadeFin but do not have a convenient rod holder in the right location. It can also help when the preferred shade position is on existing T-top structure rather than in a gunnel or hardtop-mounted rod holder.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the mount with fresh water and check the clamping area during routine cleaning. Keeping the polished stainless surface free of salt buildup and inspecting the locking points helps maintain a clean fit and dependable operation through repeated setup and removal.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071342773,"sku":"QBP617302","price":175.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331626_qbp617302.jpg?v=1780191655"},{"product_id":"qbp842132","title":"TACO Marine Pro Series Outrigger Mounts, Twist \u0026 Lock, For Carbon Fiber Tele-Outriggers, Up to 24 ft, 4-1\/2 in Hardtops, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-500XL is a Pro Series outrigger mount pair for offshore sport-fishing boats with thicker hardtops, built to carry TACO Carbon Fiber Tele-Outriggers up to 24 feet long. It lets the crew adjust pole lift and rotation from the deck, which matters when the boat is moving, the spread is active, and reaching up to the hardtop is not practical.\u003c\/p\u003e\u003cp\u003eThis XL version uses a longer body for hardtops up to 4-1\/2 inches thick. The Twist \u0026amp; Lock pole connection secures compatible poles without pins or bolts, while the controlled 180° rotation, safety detents, and locking head help keep pole movement predictable during deployment and trolling.\u003c\/p\u003e\u003cp\u003eConstruction combines cast stainless steel and machined aluminum, giving the base the strength needed for offshore outrigger loads without unnecessary bulk. The mount is suited to boats in the 32 to 50-plus foot range and is dredge load tested for a full professional fishing spread.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwist \u0026amp; Lock arm secures compatible outrigger poles without pins or bolts.\u003c\/li\u003e\n\u003cli\u003ePairs exclusively with TACO Carbon Fiber Tele-Outriggers up to 24 feet long.\u003c\/li\u003e\n\u003cli\u003eLonger XL body fits hardtops up to 4-1\/2 inches thick.\u003c\/li\u003e\n\u003cli\u003eDeck-level lift and rotation controls reduce the need to reach above the hardtop while setting or retrieving the spread.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty outward rotation handle and dual-detented lifting crank handle support controlled pole positioning.\u003c\/li\u003e\n\u003cli\u003eSafety detents help prevent uncontrolled rotation during deployment.\u003c\/li\u003e\n\u003cli\u003eLocking head helps stop the outrigger poles from creeping downward while in use.\u003c\/li\u003e\n\u003cli\u003eAllows controlled 180° rotation when needed for spread adjustment, docking, or storage position.\u003c\/li\u003e\n\u003cli\u003eCast stainless steel and machined aluminum construction handles the torque and whip created by outrigger poles.\u003c\/li\u003e\n\u003cli\u003eNo port or starboard designation, so installation planning is simpler for paired hardtop layouts.\u003c\/li\u003e\n\u003cli\u003eBase hole pattern matches TACO Marine Grand Slam models for easier upgrades on compatible installations.\u003c\/li\u003e\n\u003cli\u003eCompatible with 6° wedge plates WP-500-6, sold separately, when a different mounting angle is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe GS-500XL is made for hardtop installations where a longer mount body is needed. It includes matching 6 inch by 8 inch by 1\/2 inch oval backing plates, which help spread load under the top and are especially useful on boats that see repeated pounding offshore.\u003c\/p\u003e\u003cp\u003eBecause this mount handles long carbon fiber outriggers and a full trolling spread, the hardtop structure should be checked before installation. Proper backing, bolt access, and clearance for the rotation and lifting handles are important parts of the fit check.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis mount is for TACO Carbon Fiber Tele-Outriggers and is not a general-purpose outrigger base for mixed pole types. It is a strong match for offshore center consoles and sport-fishing boats where the crew runs long poles, dredges, and multiple lines while keeping adjustments reachable from the deck.\u003c\/p\u003e\u003cp\u003eThe controlled rotation and deck-operated handles are useful during offshore trolling, clearing lines, docking, trailering prep, and moving the poles into a safer position when weather or traffic changes.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of GS-500XL outrigger mounts\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003cli\u003eMatching 6 inch by 8 inch by 1\/2 inch oval backing plates\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071375541,"sku":"QBP842132","price":4999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331628_qbp842132.jpg?v=1780191655"},{"product_id":"qbp991962","title":"TACO Marine ShadeFin Telescopic Rod Holder Accessory, 42-67 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-3000-9 is a ShadeFin telescopic rod holder mount that turns a standard gunnel rod holder into an adjustable support point for portable boat shade. It extends from 42 inches to 67 inches tall, helping raise ShadeFin over the deck so there is usable standing space below.\u003c\/p\u003e\u003cp\u003eThis mount is made from clear anodized aluminum and uses a solid aluminum gimbal butt that drops into a standard rod holder. The bottom joint adjusts the upward angle to 0°, 15°, or 30° with a Sure-Grip knob and pull pin lock, while the throw latch controls height and 360° horizontal rotation.\u003c\/p\u003e\u003cp\u003eIt is a practical add-on for boats that need shade at the dock, at the sandbar, while fishing, or when people are in the water alongside the boat. A fixed or adjustable ShadeFin rod holder mount is required at the top and is sold separately.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits standard gunnel rod holders, so no permanent deck hardware is needed for normal use.\u003c\/li\u003e\n\u003cli\u003eTelescopes from 42 inches to 67 inches tall to lift ShadeFin above the deck.\u003c\/li\u003e\n\u003cli\u003eBottom joint adjusts to 0°, 15°, or 30° using a Sure-Grip knob and pull pin lock.\u003c\/li\u003e\n\u003cli\u003eThrow latch allows height adjustment and 360° horizontal rotation for positioning shade over the deck or over the side of the boat.\u003c\/li\u003e\n\u003cli\u003eClear anodized aluminum construction helps keep the mount light while standing up to regular marine use.\u003c\/li\u003e\n\u003cli\u003eSolid aluminum gimbal butt seats into the rod holder for a stable base.\u003c\/li\u003e\n\u003cli\u003eInternal Delrin bearings support smooth adjustment during setup.\u003c\/li\u003e\n\u003cli\u003eSold each and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eInstallation is straightforward for boats with a standard gunnel rod holder. Insert the solid gimbal butt into the rod holder, remove the pull pin, set the lower joint angle to 0°, 15°, or 30°, tighten the Sure-Grip knob, and reinstall the pull pin.\u003c\/p\u003e\u003cp\u003eThe ShadeFin rod holder mount then fits into the top opening. Once the gimbal butt seats into the accessory gimbal pin, the ShadeFin can be attached and deployed. The throw latch is used after setup to fine tune the height and rotate the shade into position.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for use with the TACO Marine ShadeFin system and a standard gunnel rod holder. It is a good match for center consoles, bay boats, cruisers, and other vessels where rod holders are already available and temporary shade is preferred over a fixed frame.\u003c\/p\u003e\u003cp\u003eBecause it relies on an existing rod holder, fit should be checked against the rod holder location, angle, and surrounding clearance on the boat. The mount also needs the separate fixed or adjustable ShadeFin rod holder mount at the top to complete the setup.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe clear anodized aluminum tube, solid aluminum gimbal butt, and Delrin bearing components make the unit suitable for repeated handling in a marine environment. After use around saltwater, rinse the mount with fresh water, dry it before storage, and check the latch, pull pin, and knob before the next setup.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071408309,"sku":"QBP991962","price":455.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331633_qbp991962.jpg?v=1780191656"},{"product_id":"qbp621686","title":"TACO Marine Low Profile Adjustable Seat Slide, 13 x 10 in, Detachable Mount, 7 Positions, 5-1\/2 in Travel","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine M20-1013A is a low profile adjustable seat slide with a detachable mount for boat helm seats and other marine seating layouts that need fore and aft adjustment without adding unnecessary height. It gives the seat seven equally spaced locking positions with 5-1\/2\" of travel, so the helm position can be set for better reach to the wheel, throttle, electronics, and footrest.\u003c\/p\u003e\u003cp\u003eThe slide uses a precision machined 6000-series aluminum chassis with high-strength polymer glides for movement that stays smooth and helps reduce seat rattle. Its front activation lever moves with the seat, keeping the release within reach from each seating position.\u003c\/p\u003e\u003cp\u003eThis model fits pedestal and box seat applications through a universal mounting bolt pattern and works with seats from 23\" to 28\" wide. The low 1.85\" height helps keep the seating position close to the original helm height, which matters on center consoles, cruisers, and fishing boats where sightlines and control reach are already set.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSeven equally spaced adjustment positions with 5-1\/2\" of fore and aft travel.\u003c\/li\u003e\n\u003cli\u003eLow 1.85\" profile helps maintain the original seating height at the helm.\u003c\/li\u003e\n\u003cli\u003ePrecision machined 6000-series aluminum chassis for a seat slide structure suited to marine use.\u003c\/li\u003e\n\u003cli\u003eHigh-strength polymer glides support smooth movement and help keep operation rattle-free.\u003c\/li\u003e\n\u003cli\u003eFront activation lever stays accessible while seated and slides with the seat.\u003c\/li\u003e\n\u003cli\u003eUniversal mounting bolt pattern fits both pedestal and box seat applications.\u003c\/li\u003e\n\u003cli\u003eModular mounting plate allows installation and seat detachment without turning the project into a custom fabrication job.\u003c\/li\u003e\n\u003cli\u003eRated to ABYC H31 testing standards for marine seating hardware.\u003c\/li\u003e\n\u003cli\u003eMade for seats from 23\" to 28\" wide.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis seat slide is a practical upgrade when the existing helm seat needs more adjustment range or when a fixed seat position does not suit multiple operators. The universal mounting pattern gives installers flexibility on pedestal bases and box-style seating platforms, while the detachable mount helps when the seat needs to come off for service, storage, cleaning, or access below the helm area.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm the available footprint, the seat width, the bolt pattern on the seat base, and the space needed for the seat to travel through its full 5-1\/2\" range. The slide measures 10\" wide, 14.26\" long, and 1.85\" high, with a listed weight of 10.52 lb.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis slide fits well on boats where the helm seat needs to work for more than one person, or where the operator moves between a seated position and a more forward driving posture. It is especially useful on fishing boats, center consoles, pilothouse boats, and cruisers where a small change in seat position can improve visibility and access to controls.\u003c\/p\u003e\u003cp\u003eThe low profile also helps in tight helm areas where raising the seat too much would affect sightlines through the windshield, clearance under a hardtop, or comfort at the wheel.\u003c\/p\u003e\u003ch6\u003eWhat is included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHousing assembly\u003c\/li\u003e\n\u003cli\u003eMounting plate\u003c\/li\u003e\n\u003cli\u003eFasteners\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071506613,"sku":"QBP621686","price":654.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331652_qbp621686.png?v=1780191656"},{"product_id":"qbp449391","title":"TACO Marine Neptune III Leaning Post, 4 Poly Rod Holders, 15º Angle, 72-Qt Cooler Space","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine L10-2005BSA-1 is a Neptune III leaning post for center console boats 25 feet and under, fitted with four white poly tulip rod holders, a folding footrest, and under-seat space sized for a 72-quart cooler. Its footprint is 15-3\/8 inches by 35-1\/2 inches, with listed dimensions of 32 inches deep, 35-1\/2 inches wide, and 23 inches high.\u003c\/p\u003e\u003cp\u003eThis leaning post gives the helm a steady place to stand, lean, and manage rods without taking up the space of a larger seat module. It works well on smaller fishing boats where cockpit room matters, especially when rods, tackle, and a cooler need to stay close to the console.\u003c\/p\u003e\u003cp\u003eThe frame uses one-piece welded aluminum construction with an anodized finish for marine use, and the smooth marine-grade vinyl fabric resists mildew, fungus, and UV exposure. The rod holders sit at a 15 degree angle, keeping rods organized and ready while leaving the helm area clean.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for center console boats 25 feet and under where deck space around the helm is limited.\u003c\/li\u003e\n\u003cli\u003eFour white poly tulip rod holders keep multiple rods within reach during fishing runs.\u003c\/li\u003e\n\u003cli\u003eRod holders are set at a 15 degree angle for practical storage behind the helm.\u003c\/li\u003e\n\u003cli\u003eOne-piece welded aluminum frame construction adds strength without a bulky seat base.\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum finish helps the frame stand up to saltwater use and regular washdowns.\u003c\/li\u003e\n\u003cli\u003eFolding footrest gives the operator a more comfortable stance during longer rides.\u003c\/li\u003e\n\u003cli\u003eUnder-seat space fits a 72-quart cooler and uses the included strap to help secure it in place.\u003c\/li\u003e\n\u003cli\u003eMarine-grade vinyl fabric resists mildew, fungus, and UV exposure for easier upkeep.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck the console layout, deck reinforcement, and available walkway space before installation. The 15-3\/8 inch by 35-1\/2 inch footprint is useful for planning fastener locations and confirming that cooler access, tackle storage, and movement around the helm will not be blocked.\u003c\/p\u003e\u003cp\u003eBecause this is a leaning post rather than a full helm seat with a tall backrest, it suits boats where the operator needs quick movement between driving, fishing, and working around the cockpit. It is a practical match for bay boats, skiffs, and smaller offshore or coastal center consoles that need rod storage and helm support in one compact station.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eAt the helm, this post gives the driver support while standing or leaning through chop, and the footrest helps reduce fatigue on longer runs. Behind the seat, the four rod holders keep outfits staged for trolling, drifting, or quick changes at the fishing grounds.\u003c\/p\u003e\u003cp\u003eThe open space below the seat keeps a cooler or tackle box close without closing off the deck. That matters on boats where every inch around the console is shared by anglers, gear, and passengers.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eRinse the aluminum frame, rod holders, and upholstery with fresh water after saltwater use, especially around fasteners and tube joints. Use mild boat soap on the vinyl and avoid harsh cleaners that can dry or damage the surface over time.\u003c\/p\u003e\u003cp\u003eKeeping the cooler strap clean and checking mounting hardware as part of regular boat maintenance will help the leaning post stay secure and comfortable through repeated fishing trips, trailering, and dockside washdowns.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071539381,"sku":"QBP449391","price":1814.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331661_qbp449391.jpg?v=1780191657"},{"product_id":"qbp431060","title":"TACO Marine Large SuproFlex Rub Rail, 2.5 in x 1 in, 100 ft, Co-Extruded Vinyl","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Large SuproFlex Rub Rail is a semi-rigid vinyl rub rail for replacing or upgrading hull protection on medium to large boats. This Large V11-9970 profile measures 2.5 in. x 1 in. and is supplied in 100 ft. lengths, giving installers enough material for a clean run around many center consoles, fishing boats, cruisers, and similar hulls.\u003c\/p\u003e\u003cp\u003eIts co-extruded construction combines a rigid backing with a softer front face, so the rail can follow the shape of the hull while still giving the boat a protective edge at docks, pilings, and alongside other vessels. Shock-absorbing channels help manage contact at the rub rail instead of transferring every bump straight to the hull joint.\u003c\/p\u003e\u003cp\u003eSuproFlex is a practical choice for refits because it needs no pre-forming and only minimal heating for tighter bends. That can make a noticeable difference when working around bows, transoms, and molded hull curves where traditional rigid rub rail can take more time and more hands to install.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eLarge 2.5 in. x 1 in. SuproFlex profile suited to many medium and large boat rub rail replacements.\u003c\/li\u003e\n\u003cli\u003e100 ft. continuous length helps reduce seams for a cleaner perimeter installation.\u003c\/li\u003e\n\u003cli\u003eCo-extruded vinyl uses two hardness levels, with a rigid backing and softer front face for impact protection.\u003c\/li\u003e\n\u003cli\u003eShock-absorbing channels add protection where the hull is most likely to meet docks, pilings, and rafted boats.\u003c\/li\u003e\n\u003cli\u003eNo pre-forming is required, and only minimal heating is needed for tight bends during installation.\u003c\/li\u003e\n\u003cli\u003ePairs with TACO Marine V12-9980 Flex Chrome Insert, sold separately, for a finished insert channel.\u003c\/li\u003e\n\u003cli\u003eUses #10 screws at 4 in. on center for standard fastening layout.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis rub rail is offered in two color configurations for matching the look of the hull, deck joint, and existing trim.\u003c\/p\u003e\u003cp\u003eThe profile, 100 ft. length, insert compatibility, and screw spacing remain the same across these listed variants. The visible rub rail color is the main difference.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eV11-9970WHA100D: Arctic White. This finish keeps the rail visually close to many white gelcoat hulls and gives the boat a clean replacement look after a rub rail refit.\u003c\/li\u003e\n\u003cli\u003eV11-9970BKA100-1: Black. This color gives the hull edge a stronger visual outline and works well when the boat already uses black trim, black hardware accents, or a darker rub rail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rail is made for installers who need a profile that can follow common hull shapes without the extra work of pre-forming. Minimal heat may still be useful around tighter bends, especially near the bow or molded corners, but the flexible SuproFlex body helps the rail sit cleanly along the hull-to-deck joint.\u003c\/p\u003e\u003cp\u003eFor a proper installation, plan the screw spacing before starting the run and confirm that the V12-9980 insert matches the finish and appearance you want. The insert is sold separately, so it should be selected as part of the full rub rail job rather than treated as an included item.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis Large SuproFlex rub rail fits boat owners and yards handling a full perimeter replacement, collision damage repair, or a cosmetic refresh where the existing rub rail is worn, faded, cracked, or no longer protecting the hull edge well. It makes sense for boats that spend time docking, rafting up, trailering, or working around pilings where the outer edge of the hull sees regular contact.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Arctic White","offer_id":52023071572149,"sku":"QBP431060-V7","price":0.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":52023071604917,"sku":"QBP431060-V3","price":805.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335304_qbp431060.jpg?v=1780191657"},{"product_id":"qbp431068","title":"TACO Marine Command Ratchet Hinges, 18-1\/2 in, Polished SS316L, 61.5 Degree Lock, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine H25-0023 is an 18-1\/2\" Command Ratchet Hinge pair for boat seating applications such as sun pads, bolsters, and lounge backrests. It uses polished Type 316L stainless steel with brass bearings and has one locking position at 61.5 degrees, giving longer backrests a fixed support angle without the look of exposed brackets.\u003c\/p\u003e\u003cp\u003eThis hinge set is made for longer seating layouts, with support for seatbacks up to 22\" long and cushions up to 4\" thick. It is a practical fit for cockpit lounges, aft sun pads, pontoon seating, and custom helm or deck seating where the backrest needs to lift, ratchet, and return to horizontal.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e18-1\/2\" hinge length for longer sun pad, bolster, and lounge backrest installations\u003c\/li\u003e\n\u003cli\u003eOne locking position at 61.5 degrees for a fixed supported backrest angle\u003c\/li\u003e\n\u003cli\u003ePolished Type 316L stainless steel construction with brass bearings\u003c\/li\u003e\n\u003cli\u003eSupports seatbacks up to 22\" long and cushions up to 4\" thick\u003c\/li\u003e\n\u003cli\u003eMeets ABYC H-31 Class B seating application requirements, with a 500 ft-lb torque load rating for the pair\u003c\/li\u003e\n\u003cli\u003ePassed a 500-hour salt fog test for use in exposed marine seating areas\u003c\/li\u003e\n\u003cli\u003eCountersunk for #10 fasteners or 1\/4-20 bolts\u003c\/li\u003e\n\u003cli\u003eSold as a pair with a 5-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThese hinges mount above deck and work well in seating areas where the hardware remains visible, such as lounge modules, sun pad assemblies, and raised backrest sections. The countersunk mounting pattern accepts #10 fasteners or 1\/4-20 bolts, so the final fastener choice should match the seat structure, backing material, and load path on the boat.\u003c\/p\u003e\u003cp\u003eBecause seating hardware sees movement, vibration, and shifting passenger weight, the hinge pair should be installed on a sound mounting surface with proper backing where needed. Check the backrest length, cushion thickness, hinge spacing, and clearance through the full range of motion before final drilling.\u003c\/p\u003e\u003ch6\u003eMaterials and use on board\u003c\/h6\u003e\u003cp\u003eThe polished 316L stainless finish suits exposed seating hardware in cockpits, swim platform lounges, bow seating, and other wet areas where appearance and corrosion resistance both matter. Brass bearings add support at the pivot point, while the salt fog test rating gives useful confidence for boats that live around spray, washdowns, and coastal air.\u003c\/p\u003e\u003cp\u003eThis pair is a good match for owners, builders, and refit shops working on longer marine seatbacks that need a clean ratcheting support rather than a loose cushion or separate prop arm. It keeps the hardware simple, visible, and serviceable while giving the backrest a defined raised position.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePair of TACO Marine Command Ratchet Hinges\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071670453,"sku":"QBP431068","price":674.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331663_qbp431068.jpg?v=1780191658"},{"product_id":"qbp612999","title":"TACO Marine Grand Slam 390XL Outrigger Mounts, 180° Handle, 4-1\/2 in Hardtops, 35° Upward Lift, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-390XL-180 is a Grand Slam 390XL outrigger mount set with a 180° handle for boats that need controlled outrigger lift and rotation from below the hardtop or T-top. It is made for sport-fishing boats in the 25' to 50' range and fits hardtops up to 4-1\/2\" thick, making it a practical match for larger center consoles and offshore fishing layouts with thicker tops.\u003c\/p\u003e\u003cp\u003eThis pair of mounts lets the crew adjust vertical lift and horizontal rotation from the boat deck, which matters when sea conditions make climbing or reaching above the top unsafe. The 35° upward lift angle helps position outriggers for trolling spreads, while the offset 180° handle gives extra hand clearance where a standard handle orientation would be tight.\u003c\/p\u003e\u003cp\u003eThe construction uses cast stainless steel and machined aluminum, with a locking head that holds the outrigger position once set. It pairs with TACO Deluxe Aluminum and Carbon Fiber Tele-Outriggers that use the compatible 1-1\/2\" pin-locking outrigger format.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair for port and starboard outrigger mounting on offshore fishing boats.\u003c\/li\u003e\n\u003cli\u003eMade for 25' to 50' boats with hardtops or T-tops up to 4-1\/2\" thick.\u003c\/li\u003e\n\u003cli\u003e180° handle layout gives added hand clearance for installations where handle swing space is limited.\u003c\/li\u003e\n\u003cli\u003eVertical lift and horizontal rotation can be operated from under the T-top, keeping adjustments closer to the deck.\u003c\/li\u003e\n\u003cli\u003e35° upward lift angle helps set the outrigger position for trolling spreads and clearance.\u003c\/li\u003e\n\u003cli\u003eOffset handle improves access around thicker tops, frame tubing, electronics boxes, and other overhead hardware.\u003c\/li\u003e\n\u003cli\u003eLocking head holds the outrigger in position after adjustment.\u003c\/li\u003e\n\u003cli\u003eCast stainless-steel and machined aluminum construction suits exposed saltwater fishing installations.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO Deluxe Aluminum and Carbon Fiber Tele-Outriggers using the 1-1\/2\" pin-locking format.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore ordering, confirm the hardtop thickness, available handle clearance under the top, and the mounting area on the T-top, arch, or hardtop. The XL body is intended for thicker tops, and the 180° handle orientation is useful when the underside of the top has limited room around the normal handle position.\u003c\/p\u003e\u003cp\u003eThe mounting surface should be strong enough for outrigger loads, especially when running longer poles, trolling in rough water, or pulling heavier offshore spreads. Backing support and proper fastener installation are important because outrigger mounts transfer leverage into the top structure.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis mount set is a good match for offshore and coastal fishing boats where the crew needs to deploy, lift, and rotate outriggers without leaving the deck area. It suits center consoles and similar sport-fishing boats that run TACO 1-1\/2\" pin-locking aluminum or carbon fiber tele-outrigger poles.\u003c\/p\u003e\u003cp\u003eFor buyers replacing older mounts or planning a new hardtop installation, the main checks are pole compatibility, top thickness, underside clearance, and whether the 180° handle orientation fits the helm and cockpit layout better than a standard handle.\u003c\/p\u003e\u003ch6\u003eMaterials and care\u003c\/h6\u003e\u003cp\u003eThe stainless-steel and aluminum construction is built for the exposed areas of a fishing boat, but it should still be rinsed with fresh water after saltwater trips. Keep the moving parts clean, check fasteners during regular maintenance, and remove outriggers from the mounts when trailering to reduce loads on the system.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of TACO Grand Slam 390XL mounts with 180° handle\u003c\/li\u003e\n\u003cli\u003eElevation crank handle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023071801525,"sku":"QBP612999","price":3849.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331667_qbp612999.jpg?v=1780191658"},{"product_id":"qbp446024","title":"TACO Marine P10 Series Marine Lumber, King StarBoard HDPE, UV-Stabilized","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P10 Series is a King StarBoard marine lumber range for making or replacing boat accessories, panels, trim pieces, mounting pads, and other fabricated parts where wood, laminates, or common plastic do not hold up well. These sheets are made from high-density polyethylene and are UV-stabilized for marine exposure.\u003c\/p\u003e\u003cp\u003eThe material is built for wet, humid spaces on board and will not warp, rot, or delaminate when exposed to water. It can be cut, drilled, routed, and shaped with standard woodworking tools, which makes it practical for custom work in a cockpit, cabin, console, deck area, or dockside repair setup.\u003c\/p\u003e\u003cp\u003eThis range covers common project sizes from 6 x 12 inches up to 24 x 27 inches, with thickness options of 1\/4 inch, 1\/2 inch, and 3\/4 inch. Black and white options are available, giving builders and boat owners a clean match for many existing hardware layouts and interior or exterior finishes.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eKing StarBoard marine polymer sheet for boat accessories, replacement panels, trim, mounting plates, and custom fabricated parts.\u003c\/li\u003e\n\u003cli\u003eHigh-density polyethylene construction helps replace wood, laminates, and standard plastic in wet marine locations.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized material supports use in areas exposed to sun, spray, and changing weather.\u003c\/li\u003e\n\u003cli\u003eResists warping, rot, and delamination when exposed to humidity or water.\u003c\/li\u003e\n\u003cli\u003eWorks with standard woodworking tools, so cutting, drilling, routing, and shaping can be handled during normal shop or boatyard fabrication.\u003c\/li\u003e\n\u003cli\u003eRequires little to no finishing after fabrication, which helps reduce project time compared with painted or sealed wood.\u003c\/li\u003e\n\u003cli\u003eAvailable in multiple sheet sizes, thicknesses, and color options for different mounting, panel, and repair needs.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a three-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe range varies by color, sheet size, and thickness. Current options include black or white sheets, with dimensions such as 6 x 12 inches, 12 x 12 inches, 12 x 27 inches, and 24 x 27 inches. Thickness options include 1\/4 inch, 1\/2 inch, and 3\/4 inch, allowing the material to suit lighter trim work or more substantial fabricated parts.\u003c\/p\u003e\u003cp\u003eThe core material type and marine use remain consistent across the range: King StarBoard polymer lumber for boat projects where resistance to water, humidity, UV exposure, and delamination matters.\u003c\/p\u003e\u003ch6\u003eInstallation and fabrication\u003c\/h6\u003e\u003cp\u003eThis material is a good fit for boat owners, builders, and repair shops that need a workable sheet stock for custom parts. It can be measured, cut, drilled, routed, and fastened using common woodworking methods, while still giving better resistance to water exposure than wood-based materials.\u003c\/p\u003e\u003cp\u003eFor best results, the sheet size and thickness should be matched to the job. Thinner pieces are useful for covers, trim, and light panels, while thicker sheets make more sense for mounting pads, backing surfaces, and parts that need extra stiffness.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThe P10 Series works well for small fabrication jobs around fishing boats, cruisers, sailboats, tenders, and workboats. Common uses include electronics mounting surfaces, hatch or access panels, console upgrades, tackle station parts, cabin trim, dockside replacement pieces, and custom brackets where a clean polymer sheet is easier to maintain than wood.\u003c\/p\u003e\u003cp\u003eIt is especially useful for owners who want a part that can be shaped to fit an existing layout without painting, sealing, or worrying about rot in wet areas.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRoutine care is simple. Rinse away salt and dirt after exposure, then clean the surface with mild soap and water as needed. Since the material does not require paint or varnish, it helps keep maintenance low on parts that see regular spray, humidity, or foot traffic around the boat.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black \/ 12 x 27 x 1\/2-Inch","offer_id":52023072555189,"sku":"QBP446024-V5","price":68.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 12 x 27 x 1\/2-Inch","offer_id":52023072587957,"sku":"QBP446024-V0","price":68.99,"currency_code":"USD","in_stock":true},{"title":"Black \/ 12 x 27 x 3\/4-Inch","offer_id":52023072620725,"sku":"QBP446024-V6","price":99.99,"currency_code":"USD","in_stock":false},{"title":"White \/ 12 x 27 x 3\/4-Inch","offer_id":52023072653493,"sku":"QBP446024-V3","price":99.99,"currency_code":"USD","in_stock":false},{"title":"Black \/ 24 x 27 x 1\/2-Inch","offer_id":52023072686261,"sku":"QBP446024-V8","price":129.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 24 x 27 x 1\/2-Inch","offer_id":52023072719029,"sku":"QBP446024-V9","price":129.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 12 x 12 x 1\/4-Inch","offer_id":52023072751797,"sku":"QBP446024-V1","price":26.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 12 x 27 x 1\/4-Inch","offer_id":52023072784565,"sku":"QBP446024-V7","price":38.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 24 x 27 x 3\/4-Inch","offer_id":52023072817333,"sku":"QBP446024-V07","price":189.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 24 x 27x 1\/4-Inch","offer_id":52023072850101,"sku":"QBP446024-V74","price":69.99,"currency_code":"USD","in_stock":true},{"title":"White \/ 6 x 12 x 1\/4-Inch","offer_id":52023072882869,"sku":"QBP446024-V39","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335389_qbp446024.jpg?v=1780191661"},{"product_id":"qbp446048","title":"TACO Marine P14-Series Anti-Skid Marine Lumber, 12 x 27 in, HDPE, UV-Stabilized, Diamond Pattern","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine King Starboard Anti-Skid Marine Starboard is a white polymer lumber sheet for walk-on areas where wet footing, saltwater, and sun exposure are part of normal boat use. It is made from high density, UV-stabilized polyethylene and uses a diamond-pattern surface that adds traction while helping water drain away when the sheet is wet.\u003c\/p\u003e\u003cp\u003eThis P14-Series anti-skid marine lumber is offered in a 12\" x 27\" size with 1\/2\" and 3\/4\" thickness options. It suits high-traffic areas such as boarding steps, swim platforms, hatch covers, ladder steps, shower floors, stairways, entry areas, and deck sections where a high-friction surface matters.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHigh density, UV-stabilized polyethylene construction for marine exposure in sun, spray, and saltwater.\u003c\/li\u003e\n\u003cli\u003eDiamond-pattern surface adds grip underfoot and helps water drain from the contact area when wet.\u003c\/li\u003e\n\u003cli\u003ePasses ASTM D2047 slip-resistant testing for added confidence in walk-on locations.\u003c\/li\u003e\n\u003cli\u003eResists most stains and keeps its color without refinishing.\u003c\/li\u003e\n\u003cli\u003eDoes not rot or delaminate, which makes it useful in damp cockpit, deck, and boarding areas.\u003c\/li\u003e\n\u003cli\u003eChemical-resistant surface cleans with marine-grade soaps or cleansers and fresh water.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis anti-skid marine lumber is offered in two white configurations for the same general walk-on use.\u003c\/p\u003e\u003cp\u003eThe length, width, color, and diamond pattern remain the same across the variants. The thickness changes, giving the installer a choice between a lower-profile 1\/2\" sheet and a heavier 3\/4\" sheet for areas where additional material thickness is preferred.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eP14-5012WHA27-1C: 12\" x 27\" x 1\/2\". This version keeps the 12\" x 27\" footprint with a thinner profile for applications where height buildup should be kept lower.\u003c\/li\u003e\n\u003cli\u003eP14-7512WHA27-1C: 12\" x 27\" x 3\/4\". This version uses the same footprint with added thickness for installations where a more substantial sheet is desired.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis material is a practical match for owners, refit yards, and boat builders working on areas where people step, board, climb, or move around with wet shoes. The white finish works well in visible deck and cockpit spaces, while the anti-skid surface helps make small landing areas, steps, and access points feel more secure underfoot.\u003c\/p\u003e\u003ch6\u003eCare and maintenance\u003c\/h6\u003e\u003cp\u003eRoutine care is straightforward. Rinse with fresh water after saltwater exposure and clean with marine-grade soap or cleanser as needed. The polymer surface does not require varnish, paint, or refinishing, which helps reduce upkeep compared with traditional wood in wet marine locations.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"12 x 27 x 1\/2-Inch","offer_id":52023072915637,"sku":"QBP446048-V9","price":72.99,"currency_code":"USD","in_stock":false},{"title":"12 x 27 x 3\/4- Inch","offer_id":52023072948405,"sku":"QBP446048-V0","price":104.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335391_qbp446048.jpg?v=1780191661"},{"product_id":"qbp452869","title":"TACO Marine P10 Marine Lumber, 12 x 27 x 1\/2 in, Seafoam StarBoard","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P10-5012SFM27-1C is a 12 inch x 27 inch x 1\/2 inch Seafoam King StarBoard polymer sheet for building, repairing, or replacing boat parts where wood, laminate, or general plastic would not hold up well. It is a practical cut-size panel for small fabrication work around consoles, cockpit areas, storage compartments, tackle stations, and other exposed spaces on board.\u003c\/p\u003e\u003cp\u003eThis marine lumber is made from high-density polyethylene with UV-stabilized material for use around sun, spray, saltwater, and humidity. It will not rot, warp, swell, splinter, or delaminate when exposed to water, which makes it a strong fit for boat projects that need a clean finish without painting or sealing.\u003c\/p\u003e\u003cp\u003eThe Seafoam color works well when a lighter, softer finish is preferred over bright white or black. The sheet can be cut, routed, drilled, and shaped with standard woodworking tools, so it suits both repair shops and owners handling measured upgrades on their own boats.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e12 inch x 27 inch x 1\/2 inch cut-size sheet for small marine fabrication and replacement jobs.\u003c\/li\u003e\n\u003cli\u003eSeafoam King StarBoard polymer gives boat projects a light finish that blends well with many cockpit, console, and interior surfaces.\u003c\/li\u003e\n\u003cli\u003eHigh-density polyethylene construction handles wet marine areas better than wood, laminate, or many general-purpose plastics.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized material helps the sheet stand up to sun exposure during deck, cockpit, and dockside use.\u003c\/li\u003e\n\u003cli\u003eWill not rot, warp, swell, splinter, or delaminate when exposed to water or humidity.\u003c\/li\u003e\n\u003cli\u003eCan be cut, drilled, routed, and shaped with standard woodworking tools for custom panels, trim pieces, brackets, covers, and accessory mounts.\u003c\/li\u003e\n\u003cli\u003eRequires little to no finishing, so there is no need for paint, varnish, or sealing for normal marine use.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a three-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fabrication\u003c\/h6\u003e\u003cp\u003eMeasure the mounting area carefully before cutting, especially around curved consoles, hatches, electronics spaces, and hardware clearances. The 1\/2 inch thickness gives a useful balance of rigidity and workability for many small panels and boat accessory projects.\u003c\/p\u003e\u003cp\u003eUse clean cutting tools and support the sheet during fabrication to keep edges even. Holes can be drilled for fasteners, switches, hinges, or brackets, and exposed edges can be eased or shaped for a more finished look.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis sheet is well suited for replacing small worn wood or laminate pieces, making custom covers, creating backing panels, trimming storage areas, or adding a clean mounting surface for accessories. It is also useful for fishing boats, center consoles, cruisers, and sailboats where parts see regular moisture and sun.\u003c\/p\u003e\u003cp\u003eFor structural loads, hinge points, or hardware that will be pulled under force, match the fasteners and backing method to the job and the boat surface. The material works well for many onboard fabrication tasks, but proper support and fastening are still important for long-term service.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRoutine cleaning is usually simple. Rinse away salt and dirt, then wash with mild soap and water as needed. Because the material does not require paint or varnish, upkeep is mainly about keeping the surface clean and checking mounted hardware during normal boat maintenance.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023072981173,"sku":"QBP452869","price":68.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331740_qbp452869.jpg?v=1780191662"},{"product_id":"qbp446096","title":"TACO Marine Ribbed Table Pedestal, 2-3\/8 in O.D., Aluminum, Dual Taper, Satin Anodized","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Z60-Series Dual Taper Ribbed is a fixed-height aluminum table pedestal column for 2-3\/8 inch diameter marine table systems. It uses a dual taper shape, with tapered ends that seat into a matching table base and table support for a snug fit while still allowing the column to be removed when the table needs to be stowed.\u003c\/p\u003e\u003cp\u003eThis ribbed column is a practical choice for boat cabins, cockpits, dinette areas, and other onboard spaces where a removable table helps keep the layout flexible. The satin anodized finish gives the pedestal a clean aluminum look and adds useful surface protection for regular marine use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e2-3\/8 inch diameter fixed-height table column for compatible marine pedestal bases and table supports.\u003c\/li\u003e\n\u003cli\u003eDual taper ribbed column seats into matching tapered components at the top and bottom.\u003c\/li\u003e\n\u003cli\u003eRemovable column format helps open up cockpit or cabin space when the table is not in use.\u003c\/li\u003e\n\u003cli\u003eSatin anodized aluminum finish suits marine interiors and covered exterior table locations.\u003c\/li\u003e\n\u003cli\u003eAvailable in 26 inch, 27-1\/2 inch, and 30-3\/4 inch lengths for different table heights and layouts.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis pedestal column is offered in three length configurations for the same 2-3\/8 inch fixed-height table pedestal system.\u003c\/p\u003e\u003cp\u003eThe length changes between variants, while the ribbed aluminum construction, dual taper style, and satin anodized finish remain consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eZ60-8266VEL26-2: 26 inch length. This shorter column works well where the table needs to sit lower, such as compact cabin seating areas or lower-profile cockpit tables.\u003c\/li\u003e\n\u003cli\u003eZ60-7279VEL27.5-2: 27-1\/2 inch length. This mid-length option gives a little more table height while keeping the same removable dual taper setup.\u003c\/li\u003e\n\u003cli\u003eZ60-7288VEL30.75-2: 30-3\/4 inch length. This taller column is suited to layouts that need extra clearance under the tabletop or a higher dining surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eUse this column with table bases and table supports made for 2-3\/8 inch diameter dual taper columns. Matching the column diameter and taper style matters because the fit between the base, column, and table support is what keeps the table steady underway and at the dock.\u003c\/p\u003e\u003cp\u003eBefore ordering, measure the existing pedestal column outside diameter and overall length, then confirm that the receiving base and table support are built for a 2-3\/8 inch dual taper column. This is especially important when replacing an older pedestal or mixing components from different table systems.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe column drops into the compatible base and supports the tabletop through a matching upper support. Because it is removable, the table can be taken down for cleaning, fishing, entertaining, or clearing walkways in smaller cruising boats.\u003c\/p\u003e\u003cp\u003eFor a secure installation, the base and table support should be mounted to sound structure with hardware suited to the boat and mounting surface. Check that the column is fully seated before using the table, and avoid using the pedestal as a handhold or support point while moving around the boat.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse salt and dirt from the column during normal boat washdowns, then dry the surface before storage when possible. A light cleaning routine helps keep the satin anodized finish looking clean and reduces buildup around the ribbed surface.\u003c\/p\u003e\u003cp\u003eWhen the table is removed, store the column where it will not roll, dent, or contact sharp hardware. Keeping the tapered ends clean helps the column seat properly the next time the table is installed.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"26-Inch","offer_id":52023073013941,"sku":"QBP446096-V8","price":94.99,"currency_code":"USD","in_stock":true},{"title":"27-Inch","offer_id":52023073046709,"sku":"QBP446096-V5","price":73.99,"currency_code":"USD","in_stock":true},{"title":"30-Inch","offer_id":52023073079477,"sku":"QBP446096-V9","price":91.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335392_qbp446096.jpg?v=1780191662"},{"product_id":"qbp446125","title":"TACO Marine Carbon Fiber Twist \u0026 Lock Tele-Outrigger Poles, For GS-500 Mounts, 1-1\/2 in, Type 316L SS Rings, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Carbon Fiber Twist \u0026amp; Lock Tele-Outrigger pole range is a pair of telescoping carbon fiber outrigger poles for offshore trolling setups where strength, line control, and quick base attachment matter. These black poles use a Twist \u0026amp; Lock butt design, so they attach to compatible TACO outrigger mounts without lining up a separate pin or bolt hole.\u003c\/p\u003e\u003cp\u003eThe range includes 20' and 24' configurations, both with a 1-1\/2\" diameter and black carbon fiber construction with a clear UV-resistant coating. The 20' version retracts to less than 8' and the 24' version retracts to less than 9', which helps with bridge clearance, storage, and trailering after a run offshore.\u003c\/p\u003e\u003cp\u003eStainless-steel Type-316L swivel rings, anodized aluminum collars, and a triple outrigger line layout make these poles suited to mono or Dacron halyard setups. They are sold in pairs for port and starboard rigging on sportfishing boats using compatible TACO Pro Series mounts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwist \u0026amp; Lock butt design attaches to compatible TACO mounts without searching for a pin or bolt hole.\u003c\/li\u003e\n\u003cli\u003eUV-resistant, clear-coated black carbon fiber pole construction for exposed hardtop and T-top installations.\u003c\/li\u003e\n\u003cli\u003e1-1\/2\" pole diameter across both sizes for use with the compatible TACO outrigger mount family.\u003c\/li\u003e\n\u003cli\u003eTelescoping design retracts below 8' on the 20' version and below 9' on the 24' version for trailering and bridge clearance.\u003c\/li\u003e\n\u003cli\u003eStainless-steel Type-316L swivel rings and anodized aluminum collars support long-term use around salt spray.\u003c\/li\u003e\n\u003cli\u003eTriple outrigger line design supports mono or Dacron line layouts for offshore trolling spreads.\u003c\/li\u003e\n\u003cli\u003eSwivel roller collar design lets rollers track toward the lure or bait direction, helping reduce friction on halyard lines.\u003c\/li\u003e\n\u003cli\u003eAdjustable roller line caddy with stainless steel rollers and brass bushings helps keep rigging organized from the T-top or gunwale.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outrigger pole range is offered in two size configurations. The main difference is pole length, retracted length, and compatible TACO mount fitment.\u003c\/p\u003e\u003cp\u003eBoth versions share the black carbon fiber finish, 1-1\/2\" diameter, Twist \u0026amp; Lock butt design, triple outrigger line layout, and paired packaging.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOT-4240CF-HD: 24-foot size. This longer configuration telescopes to less than 9' and is listed for TACO GS-450, GS-500, and GS-500XL mounts, giving larger offshore boats more spread width while still allowing easier storage and clearance.\u003c\/li\u003e\n\u003cli\u003eOT-4200CF-HD: 20-foot size. This configuration telescopes to less than 8' and is listed for the TACO GS-500 mount, with a boat size rating up to 50'.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThese poles are intended for boats already using compatible TACO Pro Series outrigger mounts. The Twist \u0026amp; Lock connection reduces the usual handling around pin alignment at the base, which is helpful when setting up at the dock or getting the spread ready before a trolling pass.\u003c\/p\u003e\u003cp\u003eThe adjustable roller line caddy supports rigging to a T-top or gunwale, and the locking pin design keeps the poles from collapsing when fully extended. After fishing, the telescoping sections collapse for transport, storage, and reduced overhead clearance.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis range fits offshore anglers running a wider trolling spread for ballyhoo, mullet, squid chains, dredges, or mixed lure and bait presentations. The 20' version is a practical match for many center consoles up to 50', while the 24' version gives additional reach on larger boats with the listed compatible mount setup.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne pair of Carbon Fiber Twist \u0026amp; Lock tele-outrigger poles\u003c\/li\u003e\n\u003cli\u003eAdjustable roller line caddy with stainless steel rollers and brass bushings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"24-Inch","offer_id":52023073112245,"sku":"QBP446125-V7","price":4199.99,"currency_code":"USD","in_stock":false},{"title":"20-Inch","offer_id":52023073145013,"sku":"QBP446125-V3","price":4195.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335253_qbp446125.jpg?v=1780191662"},{"product_id":"qbp446167","title":"TACO Marine Zwaardvis Table Pedestal Base, For 2-3\/8 in (60mm) Column, Aluminum, Brite Anodized","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Zwaardvis table support pedestal is a fixed marine table base system for 2-3\/8\" diameter columns, also shown as 60 mm, with flush mount and surface mount configurations for different deck, sole, and cockpit table layouts.\u003c\/p\u003e\u003cp\u003eThis support is used with fixed table tops that receive a dual tapered top column. The tapered base fit helps keep the table steady in everyday boat use, while the removable column format makes it easier to clear space when the table is not needed.\u003c\/p\u003e\u003cp\u003eBoth versions use aluminum with a brite anodized finish. The surface mount version has a 7\" base outside diameter, while the flush mount version has a 7-1\/16\" base outside diameter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 2-3\/8\" diameter table columns, also listed as 60 mm, for Zwaardvis fixed-height pedestal systems.\u003c\/li\u003e\n\u003cli\u003eAvailable in surface mount and flush mount versions to suit different installation locations on board.\u003c\/li\u003e\n\u003cli\u003eTapered base interface helps the column seat securely for a stable fixed table setup.\u003c\/li\u003e\n\u003cli\u003eMade from aluminum with a brite anodized finish for a clean look in cockpit, cabin, dinette, and helm-area table installations.\u003c\/li\u003e\n\u003cli\u003eSurface mount option has a 7\" base outside diameter for installations where the base sits above the mounting surface.\u003c\/li\u003e\n\u003cli\u003eFlush mount option has a 7-1\/16\" base outside diameter for a lower-profile installation when the table is removed.\u003c\/li\u003e\n\u003cli\u003eSuited to smaller diameter table tops and tight quarters where a 60 mm pedestal system makes sense.\u003c\/li\u003e\n\u003cli\u003eCovered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis table support pedestal is offered in two mounting configurations for the same 2-3\/8\" column size.\u003c\/p\u003e\u003cp\u003eThe installation style is the main difference between the variants. The finish, column diameter, tapered base function, and fixed table application remain consistent across the two options.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eZ10-4085BLY60MM: Flush mount installation. This version sits into the mounting surface for a cleaner, lower-profile table base when the column and table are removed.\u003c\/li\u003e\n\u003cli\u003eZ10-4067BLY60MM: Surface mount installation. This version mounts on top of the deck, sole, or table support surface and is useful where a recessed installation is not practical.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eConfirm that the mating pedestal column is a 2-3\/8\" or 60 mm dual tapered column before ordering. These bases are for fixed table tops, so the table size, column height, and mounting location should be planned together to avoid unwanted movement or clearance issues around seating, hatches, companionways, or walk-through areas.\u003c\/p\u003e\u003cp\u003eFor surface mount installation, check that the mounting surface is flat and has enough backing strength for table loads while the boat is underway or at anchor. For flush mount installation, confirm that there is enough depth below the surface for the recessed base and that the location will not interfere with wiring, tanks, liners, or structural members.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis pedestal base range works well for boat owners replacing an existing 60 mm table base or setting up a removable table in a cockpit, cabin, dinette, or helm seating area. The flush mount option suits layouts where a low remaining profile matters after the table is removed, while the surface mount option is a straightforward choice when the mounting surface should not be cut for a recess.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Flush Mount","offer_id":52023073177781,"sku":"QBP446167-V5","price":91.99,"currency_code":"USD","in_stock":true},{"title":"Surface Mount","offer_id":52023073210549,"sku":"QBP446167-V4","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335259_qbp446167.jpg?v=1780191663"},{"product_id":"qbp552125","title":"TACO Marine Stainless Steel Pin with Lanyard, Plastic Knob, Type 316L SS","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F13-0244BN-1 is a stainless steel pin with lanyard and plastic knob for TACO ball and socket style deck hinges. It is used as replacement or service hardware on boat shade and canvas systems where the hinge needs a secure removable pin that can be handled quickly at the dock, underway, or during seasonal canvas removal.\u003c\/p\u003e\u003cp\u003eThe pin uses Type 316L stainless steel, a good match for saltwater exposure, washdowns, and the vibration that canvas and top hardware see on deck. The attached lanyard helps keep the pin with the fitting when the top is folded, adjusted, or removed, while the plastic knob gives your hand a better grip than a bare pin.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO ball and socket style deck hinges used with canvas, shade, and top hardware.\u003c\/li\u003e\n\u003cli\u003eType 316L stainless steel construction supports use in wet, salt-exposed marine locations.\u003c\/li\u003e\n\u003cli\u003eAttached lanyard helps prevent the pin from being dropped or misplaced during adjustment.\u003c\/li\u003e\n\u003cli\u003ePlastic knob gives a hand-friendly pull point for quick removal and reinstallation.\u003c\/li\u003e\n\u003cli\u003eUseful as service hardware for bimini tops, canopies, and similar boat shade assemblies.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis part is intended for compatible TACO ball and socket deck hinge assemblies. Before ordering, match the hinge style on the boat to the existing TACO ball and socket hardware and check that the current pin style uses the same knob and lanyard arrangement.\u003c\/p\u003e\u003cp\u003eInstallation is straightforward once the correct hinge is confirmed. Insert the pin through the hinge connection, make sure the hardware seats fully, and keep the lanyard secured so the pin stays with the fitting when the canvas frame is opened, folded, or removed.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis pin is a practical replacement item for boats with bimini tops, cockpit shade, canvas canopies, and other removable top structures. It is especially useful where the top is adjusted often, since the knob and lanyard make day-to-day handling easier and reduce the chance of losing small hardware overboard.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the pin and nearby hinge hardware with fresh water after saltwater use, especially around the lanyard connection and moving contact points. During routine canvas checks, inspect the pin for bending, the knob for secure attachment, and the lanyard for wear so the hinge connection stays dependable over time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079370933,"sku":"QBP552125","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331811_qbp552125.jpg?v=1780191674"},{"product_id":"qbp365274","title":"TACO Marine Rub Rail End Cap, 1-7\/8 in, 316 Stainless Steel, Polished","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0039 is a stainless steel rub rail end cap for finishing the end of a 1-7\/8\" rub rail installation. It gives the stern end of the rail a clean termination point while helping keep the rub rail insert seated and protected at the exposed end.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type 316L stainless steel with a polished finish, a good match for boats that see saltwater, spray, dock contact, and routine washdowns. Its listed dimensions are 2-19\/64\" long, 25\/32\" high, and 1-7\/8\" wide, and it uses a #10 screw for fastening.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-7\/8\" rub rail applications where the end of the rail needs a finished cap\u003c\/li\u003e\n\u003cli\u003eMade from Type 316L stainless steel for corrosion resistance in marine environments\u003c\/li\u003e\n\u003cli\u003ePolished finish helps the end cap blend with stainless rub rail hardware and trim\u003c\/li\u003e\n\u003cli\u003eCaps the stern end of the rub rail and helps keep the insert from working loose\u003c\/li\u003e\n\u003cli\u003eMeasures 2-19\/64\" long, 25\/32\" high, and 1-7\/8\" wide for fit checks before installation\u003c\/li\u003e\n\u003cli\u003eUses a #10 screw, making it straightforward to match with common rub rail fastening hardware\u003c\/li\u003e\n\u003cli\u003eBacked by a five-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis end cap is listed for use with several TACO rub rail profiles, including V21-1039, V21-9647, V21-9659, V21-9662, V21-9811, and V21-9866. Fit should be checked against the existing rail profile before drilling, especially on older boats where rub rail sections may have been replaced or modified over time.\u003c\/p\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThe end cap is typically installed at the stern end of the rub rail after the rail and insert are seated. A dry fit before fastening helps confirm the cap sits flush, covers the cut end cleanly, and does not pinch the insert out of shape.\u003c\/p\u003e\u003cp\u003eIt is a practical finishing part for refits, collision repairs, rub rail replacement, or cosmetic cleanup where the exposed end of the rail needs protection and a neater appearance. Boat owners working on center consoles, bay boats, cruisers, and similar fiberglass hulls can use it to complete the rub rail run without leaving the insert edge open to movement or damage.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eRinse the end cap with fresh water after saltwater use and avoid harsh cleaners that can dull the polished stainless finish. During seasonal service, check that the fastener remains tight and that the rub rail insert is still seated properly behind the cap.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079403701,"sku":"QBP365274","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331596_qbp365274.jpg?v=1780191674"},{"product_id":"qbp386039","title":"TACO Marine Rub Rail End Cap, For V21-9502, 2-19\/64 in Width, SS316, Polished","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0091 is a polished stainless steel rub rail end cap for finishing the open end of a compatible TACO rub rail installation. It caps the rail at the end of the run, helps keep the insert seated, and gives the stern or rail termination point a clean metal finish instead of leaving the profile exposed.\u003c\/p\u003e\u003cp\u003eThis end cap measures 2-7\/8 inches long, 1-5\/32 inches high, and 2-19\/64 inches wide. It uses a #8 screw and is made from polished 316 stainless steel, a sensible choice for rub rail areas that see spray, washdowns, dock contact, and regular UV exposure.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePolished stainless steel finish matches bright exterior trim and rub rail hardware.\u003c\/li\u003e\n\u003cli\u003e316 stainless steel construction helps resist corrosion in saltwater and freshwater use.\u003c\/li\u003e\n\u003cli\u003eCaps the end of the rub rail so the insert stays captured instead of working loose at the termination point.\u003c\/li\u003e\n\u003cli\u003e2-19\/64 inch width supports fit checks against the rub rail profile before installation.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO V21-9502 rub rail profile.\u003c\/li\u003e\n\u003cli\u003eSold individually, which is useful when replacing one damaged end cap or completing one end of a rail run.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eFit should be checked against the existing rub rail profile before drilling or fastening, especially on older boats where rub rail styles may have been replaced during previous repairs. The listed fit is for TACO V21-9502, and the end cap is intended to sit over the rail termination and fasten with a #8 screw.\u003c\/p\u003e\u003cp\u003eFor best results, align the insert and rail before fastening the cap so the insert is fully seated and not under tension. On boats used in saltwater, bedding the fastener area and rinsing the polished stainless after heavy spray can help keep the finish looking cleaner over time.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part is a good match for owners, yards, and riggers finishing a rub rail repair, replacing a missing stern end cap, or cleaning up the end of a rail run after hull work. It is a small component, but it matters because an exposed rail end can look unfinished and may allow the insert to creep out during normal docking, trailering, or washdown use.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079469237,"sku":"QBP386039","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331600_qbp386039.jpg?v=1780191674"},{"product_id":"qbp539477","title":"TACO Marine Rub Rail Mounted LED Navigation Light Set, 2-1\/2 in, For 3\/4 in Insert Profiles, 12-14VDC, IP68, Red\/Green Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F38-6800D is a rub rail mounted LED navigation light set for boats up to 30 feet, made to fit popular 3\/4-inch rub rail insert profiles. The set places the red port light and green starboard light into the rub rail area, which helps keep the bow deck clear and reduces the chance of hardware blocking sightlines or getting in the way during anchoring, docking, or fishing.\u003c\/p\u003e\u003cp\u003eThis 2-1\/2-inch set includes one 3-watt red port light and one 2-watt green starboard light. The housing measures 3\/4 inch high, 2-1\/2 inches wide, and 5\/16 inch deep, with a 12-14 VDC operating range and a 0.6 amp draw at 12V. The lights give a 120-degree unobstructed view and are rated IP68 for water resistance, which is important for a bow location that sees spray, rain, and washdowns.\u003c\/p\u003e\u003cp\u003eThe polished stainless steel joiner cover gives the installation a clean finished look at the rub rail, while the anodized aluminum heat sink helps manage heat from the LEDs. This is a practical upgrade for bay boats, center consoles, and other small powerboats where deck space and clean bow hardware matter.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRub rail mounted LED navigation light set that helps keep the bow deck open and uncluttered.\u003c\/li\u003e\n\u003cli\u003eFits popular 3\/4-inch insert profiles and suits boats up to 30 feet in length.\u003c\/li\u003e\n\u003cli\u003eIncludes one 3-watt red port light and one 2-watt green starboard light.\u003c\/li\u003e\n\u003cli\u003e2-1\/2-inch width with a low 5\/16-inch depth for a clean rub rail installation.\u003c\/li\u003e\n\u003cli\u003e120-degree unobstructed view with reduced glare for proper side-light visibility.\u003c\/li\u003e\n\u003cli\u003eIP68 water-resistant rating for exposure to spray, rain, and routine washdowns.\u003c\/li\u003e\n\u003cli\u003e12-14 VDC operation with a 0.6 amp draw at 12V and raw wire leads for hardwiring.\u003c\/li\u003e\n\u003cli\u003eLED brightness comparable to a 10-watt incandescent light while using lower power.\u003c\/li\u003e\n\u003cli\u003eHeavy gauge polished stainless steel joiner cover with an anodized aluminum heat sink.\u003c\/li\u003e\n\u003cli\u003eMeets ABYC and USCG requirements for sailboat and powerboat navigation light designation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe F38-6800D is intended for rub rail installations using compatible 3\/4-inch insert profiles. Before cutting or drilling, the bow shape and rub rail path should be checked so each side light sits where it can show the correct arc without being hidden by the hull shape, rail hardware, trolling motor gear, or other bow equipment.\u003c\/p\u003e\u003cp\u003eEach light is hardwired using the raw leads and runs on the boat's 12V DC system. A 1-inch #8 stainless steel fastener is required for installation and is not included, so matching stainless hardware should be prepared before starting the job.\u003c\/p\u003e\u003ch6\u003eElectrical and marine use\u003c\/h6\u003e\u003cp\u003eThis set is a good match for boats where standard deck-mounted bow lights take up space or create glare near the casting deck. The low profile rub rail position works especially well on bay boats and center consoles that see regular night runs, early departures, dockside maneuvering, and fishing use in wet conditions.\u003c\/p\u003e\u003cp\u003eThe IP68 rating, polished stainless joiner cover, and heat-sink construction make the unit suitable for normal marine exposure, but the wiring connections still need proper marine crimping, sealing, and strain relief. As with any navigation light, final placement should be checked at the dock and on the water to confirm clean visibility from the required angles.\u003c\/p\u003e\u003ch6\u003eWhat's included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOne red port LED navigation light.\u003c\/li\u003e\n\u003cli\u003eOne green starboard LED navigation light.\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel joiner cover.\u003c\/li\u003e\n\u003cli\u003eRaw wire leads.\u003c\/li\u003e\n\u003cli\u003eInstallation instructions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079502005,"sku":"QBP539477","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331604_qbp539477.jpg?v=1780191675"},{"product_id":"qbp430316","title":"TACO Marine Transom Cross Tie Cleat XL, For 1-7\/8 in Rod Holders, 5\/8 in Dock Lines, Brushed Aluminum","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F30-0863BSA-1 is a portable Transom Cross Tie Cleat XL for keeping stern dock lines elevated and clear of outboard motor cowlings during short-term docking. It gives the stern a raised tie-off point when the dock sits lower than the engines, which is a common issue on center consoles, bay boats, and other outboard-powered boats.\u003c\/p\u003e\u003cp\u003eThis XL cleat uses a brushed aluminum finish with a 15 degree S-shape, 9 in. cleat design. The 5-1\/2 in. sleeve fits into standard 1-7\/8 in. open-bottom gunwale rod holders, and the latching mechanism holds the cleat in place while still allowing it to be removed and stowed when it is not needed.\u003c\/p\u003e\u003cp\u003eThe cleat accepts dock lines up to 5\/8 in. and can also be used for light onboard tasks such as hanging fenders or chum bags. It is useful for docking and temporary tie-off situations, but it is not intended for permanent docking.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRaises stern dock lines to help keep them away from outboard motor cowlings when tying off at the transom.\u003c\/li\u003e\n\u003cli\u003eFits standard 1-7\/8 in. open-bottom gunwale rod holders with a 5-1\/2 in. sleeve.\u003c\/li\u003e\n\u003cli\u003e15 degree S-shape, 9 in. cleat gives room to manage dock lines up to 5\/8 in.\u003c\/li\u003e\n\u003cli\u003eLatching mechanism helps hold the cleat in the rod holder while keeping removal and reinstallation straightforward.\u003c\/li\u003e\n\u003cli\u003eBrushed aluminum finish suits visible cockpit and transom areas without adding permanent hardware.\u003c\/li\u003e\n\u003cli\u003eLoop hole design supports additional temporary uses such as hanging fenders or chum bags.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis cleat drops into a compatible open-bottom rod holder, so it is a practical option when the boat already has stern or gunwale rod holders in the right location. Before ordering, check that the rod holder is open at the bottom and has a 1-7\/8 in. diameter opening that can accept the sleeve.\u003c\/p\u003e\u003cp\u003eBecause it is removable, it works well for boaters who want a clean deck layout while underway and a more convenient stern tie-off point when they arrive at the dock. It should be stowed when not in use and should not replace a fixed cleat for long-term mooring.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe Transom Cross Tie Cleat XL is a good match for outboard boats that regularly dock stern-to or alongside docks where the line angle would otherwise run too low across the engines. It helps keep dock lines organized during arrival, fueling, marina stops, and short dockside stays.\u003c\/p\u003e\u003cp\u003eFor fishing boats, the removable format is also useful because the cleat can be installed only when needed, leaving the rod holder available for normal use the rest of the time.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079534773,"sku":"QBP430316","price":289.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331610_qbp430316.jpg?v=1780191675"},{"product_id":"qbp144225","title":"TACO Marine Surface Mount LED Side Navigation Light Set, For Boats up to 40 ft, 12-24VDC, IP68, 2nm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F38-6610D is a surface mount LED side navigation light set for boats up to 40 feet, with a low-profile red and green pair built for flat mounting locations.\u003c\/p\u003e\u003cp\u003eEach light sits under a heavy-gauge polished stainless-steel cover, giving the installation a clean look without taking up much space on the bow, cabin side, or other suitable flat surface. The lights measure 1 inch high, 1-3\/4 inches wide, and 3\/8 inch deep, so they are useful where a conventional side light housing would be too bulky.\u003c\/p\u003e\u003cp\u003eThe set uses 3-watt red and green LEDs with a .6 amp draw at 12V, a 112.5 degree view angle, and a 2 nautical mile designation for sail and powerboats. It is rated IP68 for water resistance and is intended for low-voltage 12 to 14 VDC systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSurface-mount side navigation light set with one red and one green LED light for port and starboard visibility.\u003c\/li\u003e\n\u003cli\u003eSuitable for boats up to 40 feet where 2 nautical mile side lights are required.\u003c\/li\u003e\n\u003cli\u003eMeets ABYC and USCG requirements for sail and powerboat side navigation light designation 2nm.\u003c\/li\u003e\n\u003cli\u003e3-watt LED output with a low .6 amp draw at 12V, reducing battery load compared with a 10-watt incandescent light.\u003c\/li\u003e\n\u003cli\u003e112.5 degree unobstructed viewing angle helps keep the correct side-light sector visible with less glare.\u003c\/li\u003e\n\u003cli\u003eHeavy-gauge polished stainless-steel cover protects the light and keeps the installation low and neat.\u003c\/li\u003e\n\u003cli\u003eAnodized cylindrical aluminum heat sink helps manage LED heat during long periods of use.\u003c\/li\u003e\n\u003cli\u003eIP68 water-resistant rating supports exposed marine installations where spray, rain, and washdowns are part of normal use.\u003c\/li\u003e\n\u003cli\u003eInstalls on flat surfaces with marine adhesive sealant, making it useful for compact mounting areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis light set is meant for flat mounting surfaces and works well on boats where space around the bow or small transom-style areas is limited. The shallow 3\/8 inch depth keeps the lights close to the surface, which helps reduce snag points and keeps the hardware visually subtle.\u003c\/p\u003e\u003cp\u003eBecause navigation light position affects compliance and visibility, the mounting location should allow the red and green sectors to remain clear from railings, canvas, hardware, and hull flare. Use a marine adhesive sealant during installation to help seal the mounting area against water intrusion.\u003c\/p\u003e\u003ch6\u003eElectrical and system integration\u003c\/h6\u003e\u003cp\u003eThe F38-6610D is a low-voltage LED set for 12 to 14 VDC boat electrical systems. Its .6 amp draw at 12V makes it a practical match for small cruisers, center consoles, fishing boats, and sailboats that need required side lighting without adding a heavy load to the house or starting battery system.\u003c\/p\u003e\u003cp\u003eThe LEDs are built for long service life, so the set is a good fit for owners replacing older incandescent side lights and looking for lower current draw, less routine maintenance, and a cleaner surface-mount installation.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eOne pair of surface-mount LED side navigation lights with red and green LEDs.\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079567541,"sku":"QBP144225","price":257.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331611_qbp144225.jpg?v=1780191676"},{"product_id":"qbp335350","title":"TACO Marine Grand Slam 800 VHF Antenna Mount, IP66, 1-14 Thread, Up to 2 in Hardtops","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-800-1 is a Grand Slam 800 VHF antenna mount for raising and lowering a boat VHF antenna from below the hardtop or T-top. It gives the operator deck-level control of the antenna angle, which helps avoid climbing onto gunnels or hardtop structure when lowering the antenna for bridges, storage, trailering, or docking under cover.\u003c\/p\u003e\u003cp\u003eThis mount accepts standard 1\"-14 male-thread VHF antenna shafts and mounts through hardtops up to 2\" thick. The body is machined and anodized aluminum with a light brushed finish, and the crank handle is polished Type-316L stainless steel.\u003c\/p\u003e\u003cp\u003eFor boats that run offshore, fish hard, or spend time in saltwater, the practical value is simple: the antenna can be moved when needed without turning a routine adjustment into an awkward climb. The IP66 water-resistance rating, sealed piston, Delrin bearings, and roller bearings in the crank assembly help the mechanism handle normal spray, washdowns, and vibration on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eRaises and lowers a VHF antenna from below the top, reducing the need to climb on T-tops or gunnels.\u003c\/li\u003e\n\u003cli\u003eAccepts standard 1\"-14 male-thread shafts used with standard VHF antennas.\u003c\/li\u003e\n\u003cli\u003eMounts through hardtops up to 2\" thick for use on many center consoles, pilothouse tops, and hardtop installations.\u003c\/li\u003e\n\u003cli\u003eMachined and anodized aluminum body with a light brushed finish for a clean helm-area appearance.\u003c\/li\u003e\n\u003cli\u003ePolished Type-316L stainless steel crank handle folds and locks flush into the base when not in use.\u003c\/li\u003e\n\u003cli\u003eThreaded shaft supports controlled lift and descent instead of a loose manual swing.\u003c\/li\u003e\n\u003cli\u003eDelrin bearings and roller bearings in the crank assembly help the mount operate smoothly.\u003c\/li\u003e\n\u003cli\u003eIP66 water-resistance rating with a sealed piston for exposed marine mounting locations.\u003c\/li\u003e\n\u003cli\u003eCompatible with the WP-800-900 6º wedge plate, sold separately, when the mounting angle needs correction.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe mount is intended for hardtop or T-top installation where the crank can be reached from below. Before cutting or drilling, confirm the top thickness, check the underside for clearance, and make sure the crank handle has enough room to fold flush into the base.\u003c\/p\u003e\u003cp\u003eThe included round backing plate helps spread load under the mounting surface, but mounting hardware is not included. Fasteners should be selected for the top material, backing structure, and exposure to saltwater, with proper sealing around penetrations to keep water out of the hardtop core.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis mount is a strong fit for center consoles, offshore fishing boats, and cruising boats where the VHF antenna sits on a hardtop and needs to be lowered regularly. It is especially useful around bridges, rack storage, trailering, covered slips, and service areas where antenna height changes often.\u003c\/p\u003e\u003cp\u003eThe flush-locking crank keeps the handle out of the way when the antenna is set, which is helpful in tight helm overhead areas. The manual crank layout also keeps the antenna adjustment simple, with no electrical wiring or switches needed for the lift mechanism.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGrand Slam 800 VHF antenna mount\u003c\/li\u003e\n\u003cli\u003e4\" x 1\/4\" round backing plate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079600309,"sku":"QBP335350","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331813_qbp335350.jpg?v=1780191676"},{"product_id":"qbp815633","title":"TACO Marine Grand Slam 390 Outrigger Mount, For 1-1\/2 in Outriggers, Offset Handle, SS316L","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-390 is a Grand Slam 390 top-mount outrigger base for 1-1\/2 in outriggers, made for larger center console boats that need strong control from beneath the T-top. It is suited to boats in the 25 ft to 40 ft range and uses a reinforced gusset and thicker arm to manage the torque that comes with longer outrigger poles.\u003c\/p\u003e\u003cp\u003eThis mount lets the crew raise the outrigger with a crank handle and rotate it horizontally from under the top, which matters when lines need to be adjusted while the boat is moving or the sea state is less than calm. The mount has a 45 degree upward lift angle, secure pin-locking technology, and a locking head that helps keep the outrigger in the selected fishing position.\u003c\/p\u003e\u003cp\u003eConstruction combines cast Type 316L stainless steel with machined aluminum, a practical mix for offshore use where salt, spray, and vibration are part of every trip. The GS-390 is supplied as a pair, with a listed pair weight of 35 lb, and it works with T-top installations up to 2-5\/8 in thick.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits 1-1\/2 in outrigger poles for sport fishing and offshore trolling setups.\u003c\/li\u003e\n\u003cli\u003eMade for larger center console boats from 25 ft to 40 ft where longer poles can place more load on the base.\u003c\/li\u003e\n\u003cli\u003eReinforced gusset support and a thicker arm help handle the torque created by longer outrigger poles.\u003c\/li\u003e\n\u003cli\u003eElevation crank handle raises the outrigger from under the T-top, with a 45 degree upward lift angle.\u003c\/li\u003e\n\u003cli\u003eHorizontal rotation is controlled from under the T-top, so adjustments can be made from the deck.\u003c\/li\u003e\n\u003cli\u003eOffset handle gives the operator more hand clearance around hardtop and T-top structures.\u003c\/li\u003e\n\u003cli\u003eSecure pin-locking technology and a locking head help hold the outrigger in the selected position.\u003c\/li\u003e\n\u003cli\u003eCast Type 316L stainless steel and machined aluminum construction suits regular saltwater use.\u003c\/li\u003e\n\u003cli\u003ePairs with TACO Deluxe Aluminum and Carbon Fiber Tele-Outriggers.\u003c\/li\u003e\n\u003cli\u003eTop-mount base uses a 4 in x 6 in footprint with a 3 in x 5 in on-center bolt pattern.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe GS-390 mounts through the T-top using a 4 in x 6 in base pattern, with 5\/16 in mounting holes and a 3 in x 5 in on-center bolt layout. Before drilling, measure the top thickness and confirm that the mounting area has enough structure to support the load from the outriggers during trolling, turns, and rough-water running.\u003c\/p\u003e\u003cp\u003eA backing plate is commonly used on outrigger installations to spread the load across the top structure. On boats that fish offshore or pull heavier spreads, this is an important part of keeping the mount secure and reducing stress around the fasteners.\u003c\/p\u003e\u003ch6\u003eOutrigger compatibility\u003c\/h6\u003e\u003cp\u003eThis mount is for 1-1\/2 in outriggers and is a good match for TACO Deluxe Aluminum or Carbon Fiber Tele-Outriggers. The pin-locking connection is useful for crews that want a firm, repeatable setup when deploying, raising, or rotating the poles during trolling.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThe GS-390 fits boats that need outrigger control from the deck rather than from above the top. That makes it useful on offshore center consoles where the crew may be clearing lines, resetting baits, or adjusting the spread while staying inside the cockpit or helm area.\u003c\/p\u003e\u003cp\u003eFor anglers running longer poles on faster boats, the stronger arm and gusset give this mount a more serious feel than a light-duty base. It is best suited to sport fishing layouts where outrigger position, hand clearance, and under-top operation all matter.\u003c\/p\u003e\u003ch6\u003eCare and maintenance\u003c\/h6\u003e\u003cp\u003eRinse the mount with fresh water after saltwater trips, especially around the locking head, handle, and moving parts. Check the fasteners and mounting area during routine boat maintenance, and inspect the outrigger connection before offshore runs or after trailering long distances.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079633077,"sku":"QBP815633","price":4504.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331885_qbp815633.jpg?v=1780191677"},{"product_id":"qbp794973","title":"TACO Marine Grand Slam 390XL Outrigger Top Mount, For 1-1\/2 in Outriggers, Up to 4 in Tops, Type-316L SS, Machined Aluminum, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-390XL is a Grand Slam 390XL outrigger mount for 1-1\/2 inch outrigger poles, supplied as a pair for larger center console boats with hardtops up to 4-1\/2 inches thick. It gives the crew control of outrigger vertical lift and horizontal rotation from below the T-top, which is useful when the boat is moving, the sea is uneven, or the outriggers need to be adjusted without climbing onto the gunwale.\u003c\/p\u003e\u003cp\u003eThis XL version uses an extended base so the mount can pass through thicker tops without interfering with the rotation and lift mechanism. It carries the same operating approach as the standard Grand Slam 390, with a stronger gusset, thicker arm, pin-locking setup, and a crank handle for raising or lowering the outrigger from under the top.\u003c\/p\u003e\u003cp\u003eConstruction combines cast Type-316L stainless steel with machined aluminum, giving the mount the kind of corrosion resistance and rigidity expected around offshore fishing hardware. It pairs with TACO Deluxe Aluminum and Carbon Fiber Tele-Outriggers and suits boats that need a heavy-duty top-mount outrigger base for trolling spreads, pelagic fishing, and regular saltwater use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSold as a port and starboard pair for a complete outrigger mount installation.\u003c\/li\u003e\n\u003cli\u003eFits hardtops up to 4-1\/2 inches thick, giving more clearance than the standard GS-390 mount.\u003c\/li\u003e\n\u003cli\u003eWorks with 1-1\/2 inch diameter outrigger poles, including TACO Deluxe Aluminum and Carbon Fiber Tele-Outriggers.\u003c\/li\u003e\n\u003cli\u003eVertical lift and horizontal rotation can be handled from below the T-top, keeping adjustments within reach from the deck.\u003c\/li\u003e\n\u003cli\u003e45 degree upward lift angle helps set outrigger position for trolling and clearance.\u003c\/li\u003e\n\u003cli\u003ePin-locking arm and strong locking head help hold the outrigger position once set.\u003c\/li\u003e\n\u003cli\u003eOffset rotation handle gives extra hand clearance under the top during adjustment.\u003c\/li\u003e\n\u003cli\u003eCast Type-316L stainless steel and machined aluminum construction stands up to saltwater use, vibration, and repeated load from longer outrigger poles.\u003c\/li\u003e\n\u003cli\u003eIncludes 5\/16 inch x 18 x 5 inch mounting bolts for the XL installation.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe GS-390XL is a top-mount outrigger base for hardtops, T-tops, arches, and similar mounting surfaces that are strong enough to carry outrigger loads. The center opening is 3-1\/8 inches, and the installation should leave enough clearance around the handle and locking pin so the mount can rotate freely. The locking pin should face outboard for access from the deck.\u003c\/p\u003e\u003cp\u003eFor hardtop installations, the mounting surface should be checked before drilling, especially on foam-filled or cored tops. Tubing spacers are used where the bolts pass through the top so the mounting hardware can be tightened without crushing the top structure. Backing plates are recommended when extra support is needed, particularly on larger boats or on tops that see regular offshore loads.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is a good match for larger fishing boats that run longer outriggers and need deck-level control of the spread. It is commonly used on center consoles in the 25 to 50 foot range, especially where a thicker hardtop rules out the standard-length GS-390 base.\u003c\/p\u003e\u003cp\u003eBefore ordering, the main fit checks are top thickness, under-top handle clearance, outrigger pole diameter, and the strength of the mounting area. Boats with arched tops or crowded hardtop layouts may need wedge plates or extra planning so the mount sits upright and the handle has a clear sweep.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eFor offshore trolling, the GS-390XL lets the crew raise, lower, and rotate the outriggers without leaving the deck area. That matters when conditions change quickly, when a bridge or storage height is coming up, or when the spread needs to be reset while fishing.\u003c\/p\u003e\u003cp\u003eWhen the boat is not fishing, the outrigger poles should be lowered and collapsed for trailering, storage, or long runs where the full spread is not needed. A light rinse and periodic attention to moving parts will help keep the stainless and aluminum components working cleanly in a saltwater environment.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079665845,"sku":"QBP794973","price":5287.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331530_qbp794973.jpg?v=1780191677"},{"product_id":"qbp437367","title":"TACO Marine Grand Slam 850 Electric VHF Antenna Mount, 12V, 1-14 Thread","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-850 is an electric VHF antenna mount for hardtop installations where the antenna needs to raise and lower from the helm instead of being handled by hand on deck. It accepts standard 1 in.-14 male-thread VHF antenna shafts up to 8 ft and runs on a 12V DC power supply for lift and descent.\u003c\/p\u003e\u003cp\u003eThis mount is useful on center consoles, pilothouse boats, and other hardtop-equipped vessels where bridge clearance, trailering, storage, or low overhead structures make antenna positioning part of normal operation. The fully electric layout keeps wiring hidden inside the hardtop, and the surface-mount design does not require under-mount clearance.\u003c\/p\u003e\u003cp\u003eThe body is machined and anodized aluminum with a light brushed finish, with a threaded shaft for controlled lift and descent. It weighs 2.1 lb, includes a 6 in. lead of 20-gauge wire from the base, and accepts a 3A fuse in the main positive 12V DC power feed.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eElectric raise and lower operation lets the VHF antenna be adjusted from the helm.\u003c\/li\u003e\n\u003cli\u003eFits standard 1 in.-14 male-thread VHF antenna shafts up to 8 ft.\u003c\/li\u003e\n\u003cli\u003eSurface-mount installation works without under-mount clearance, which helps on hardtops with limited access below.\u003c\/li\u003e\n\u003cli\u003eMachined and anodized aluminum body with a light brushed finish for exposed marine installations.\u003c\/li\u003e\n\u003cli\u003eThreaded shaft supports steady lift and descent rather than a loose manual swing.\u003c\/li\u003e\n\u003cli\u003eBreakaway pin allows manual operation when electric operation is not available.\u003c\/li\u003e\n\u003cli\u003eIncludes a 6 in. lead of 20-gauge wire from the base for the 12V DC connection.\u003c\/li\u003e\n\u003cli\u003eAccepts a 3A fuse in the main positive 12V DC power feed, with the fuse supplied separately.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe GS-850 mounts on the surface of the hardtop, so it is well suited to installations where there is little or no room below the mounting surface. Routing the wiring inside the hardtop keeps the deck area cleaner and helps reduce exposed wire runs around electronics boxes and helm stations.\u003c\/p\u003e\u003cp\u003eThe mount requires 12V DC power and a DPDT on-off-on switch for control. The main positive feed should be protected with a 3A fuse, supplied separately. For best results, the antenna location should allow full antenna movement without interference from outriggers, radar arrays, anchor lights, canvas, or rocket launchers.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for VHF antennas with a standard 1 in.-14 threaded base and a maximum antenna length of 8 ft. It pairs naturally with hardtop and T-top installations where lowering the antenna helps with bridge clearance, dry-stack storage, trailering, or maintenance access.\u003c\/p\u003e\u003cp\u003eA matching backing plate and 6 degree wedge plate are available separately for installations that need extra support or angle correction on a curved or sloped top. Mounting hardware, backing support, and sealant should be selected to suit the hardtop construction and the load created by the antenna in rough water and wind.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGrand Slam 850 electric VHF antenna mount\u003c\/li\u003e\n\u003cli\u003e6 in. lead of 20-gauge wire from the base\u003c\/li\u003e\n\u003cli\u003eDrill template\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079698613,"sku":"QBP437367","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331531_qbp437367.jpg?v=1780191677"},{"product_id":"qbp188818","title":"TACO Marine Grand Slam 900 Anchor \u0026 Stern Light, 12V LED, 2nm, Deck-Controlled","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-900-1 is a Grand Slam 900 masthead anchor and stern light kit with a manual crank base for raising and lowering the light from below the hardtop. It helps keep the light upright when needed and stowed for towing or storage without climbing onto the gunnel or reaching over the top.\u003c\/p\u003e\u003cp\u003eThe light runs on 12 volts and uses four 3-watt Cree LED chips driven by two Mean Well drivers. The mount has a standard 1\"-14 male threaded shaft, fits hardtops up to 2\" thick, and includes 32.75\" of tube so the installer can trim the light tube to the height needed for the boat.\u003c\/p\u003e\u003cp\u003eThis is a practical fit for center consoles, fishing boats, and hardtop-equipped powerboats where a top-mounted navigation light needs to be operated safely from the deck. The machined anodized aluminum body, cast stainless steel rotator, polished Type 316L stainless steel crank handle, and IP66 water-resistance rating suit exposed marine mounting locations where spray, sun, and vibration are part of normal use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eManual crank operation lets the anchor and stern light lift into position or fold down into a stowed position from below the top.\u003c\/li\u003e\n\u003cli\u003e12V LED light uses four 3-watt Cree chips with two Mean Well drivers for efficient navigation lighting.\u003c\/li\u003e\n\u003cli\u003eCertified for 3 NM visibility and intended for boats up to 39' or 12 meters in length.\u003c\/li\u003e\n\u003cli\u003eStandard 1\"-14 male threaded shaft works with the included light and shaft assembly.\u003c\/li\u003e\n\u003cli\u003eMounts through hardtops up to 2\" thick for common T-top and hardtop installations.\u003c\/li\u003e\n\u003cli\u003eIP66 water-resistance rating helps protect the unit in spray and washdown-prone areas.\u003c\/li\u003e\n\u003cli\u003eMachined anodized aluminum body with a brushed finish pairs with a cast stainless steel rotator for exposed tops.\u003c\/li\u003e\n\u003cli\u003ePolished Type 316L stainless steel crank handle folds and locks flush into the base when not in use.\u003c\/li\u003e\n\u003cli\u003eDelrin bearings and roller bearings in the crank assembly support smooth lift and descent.\u003c\/li\u003e\n\u003cli\u003eIncludes 32.75\" of tube so the installer can cut the light tube to suit the final mounting height.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe GS-900-1 is made for hardtop mounting and should be positioned where the raised light has the required visibility and where the stowed light will not interfere with antennas, canvas, outriggers, or other hardware. The threaded shaft gives the light a controlled lift and descent, while the folding crank handle keeps the base cleaner when the light is not being operated.\u003c\/p\u003e\u003cp\u003eThe mount includes a 4\" x 1\/4\" round backing plate, but mounting hardware is not included. For angled tops, the GS-900 can pair with the WP-800-900 6-degree wedge plate, which is sold separately.\u003c\/p\u003e\u003ch6\u003eElectrical and lighting use\u003c\/h6\u003e\u003cp\u003eThis unit is for 12V DC boat electrical systems. It is suited to vessels that need a top-mounted masthead anchor and stern light that can be raised for navigation or anchoring and then lowered before trailering, towing, storage, or low-clearance situations.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eGrand Slam 900 manual crank mount\u003c\/li\u003e\n\u003cli\u003eLED light and shaft assembly\u003c\/li\u003e\n\u003cli\u003e32.75\" light tube\u003c\/li\u003e\n\u003cli\u003e4\" x 1\/4\" round backing plate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079731381,"sku":"QBP188818","price":999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331532_qbp188818.jpg?v=1780191678"},{"product_id":"qbp609662","title":"TACO Marine Grand Slam 950 Electric Anchor \u0026 Stern Light, 12-24V, 2NM, Hardtop Mount","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-950 is an electric masthead anchor and stern light mount for hardtop-equipped powerboats 39 ft and under, or 12 m and under. It lets the operator raise or lower the top-mounted navigation light from the helm, which is useful when clearance, storage, trailering, bridges, or rough conditions make climbing onto seats or gunwales a poor option.\u003c\/p\u003e\u003cp\u003eThe light runs on 12V for light function and uses four 3-watt Cree LED chips with two Mean Well drivers. The unit is listed with a 6-watt stern light, a 12-watt anchor light, low draw of 0.6 amps per light, and 12-24VDC low-voltage operation for the electric mount. It is certified for the USCG-required 2 nautical miles of visibility and is built for installation on hardtops with wiring hidden inside the top.\u003c\/p\u003e\u003cp\u003eThe mount uses a machined and anodized aluminum body with a light brushed finish, a threaded shaft for controlled lift and descent, and bearings that help the light move smoothly. A removable set pin allows manual adjustment, adding a practical backup for service or dockside handling.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eElectric raise and lower control lets the light be adjusted from the helm instead of from the deck or gunwale.\u003c\/li\u003e\n\u003cli\u003eMade for powered vessels 39 ft and under, or 12 m and under.\u003c\/li\u003e\n\u003cli\u003eCertified for USCG-required 2 nautical miles of visibility.\u003c\/li\u003e\n\u003cli\u003e12V light function with four 3-watt Cree LED chips driven by two Mean Well drivers.\u003c\/li\u003e\n\u003cli\u003e6-watt stern light and 12-watt anchor light with low draw of 0.6 amps per light.\u003c\/li\u003e\n\u003cli\u003eLow-voltage 12-24VDC operation supports common marine electrical systems.\u003c\/li\u003e\n\u003cli\u003eHidden wiring through the hardtop keeps the installation clean and protected from exposed routing.\u003c\/li\u003e\n\u003cli\u003eMachined and anodized aluminum body with a light brushed finish for exposed hardtop mounting.\u003c\/li\u003e\n\u003cli\u003eThreaded shaft supports steady lift and descent, while the removable set pin allows manual adjustment.\u003c\/li\u003e\n\u003cli\u003eFits hardtop installations and accommodates different top thicknesses.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThe GS-950 mounts on the surface of the hardtop, with the wiring routed through the top rather than left exposed. This makes it a good match for center consoles, walkarounds, dual consoles, and other powerboats where the navigation light needs to sit high enough for visibility but still fold down when the boat is stored or moved under low clearance.\u003c\/p\u003e\u003cp\u003ePlan the mounting location so the light has a clear arc to raise and lower without hitting antennas, outriggers, radar domes, canvas, or other hardtop accessories. The 12V DC light lead should be connected into a protected marine electrical circuit, and the control wiring should be routed where it will not chafe or collect water.\u003c\/p\u003e\u003ch6\u003eElectrical and system fit\u003c\/h6\u003e\u003cp\u003eThis is a navigation light assembly for boats with standard DC systems, not an NMEA device or network accessory. Its value is in the powered mechanical lift and the integrated LED light, so compatibility comes down to voltage, hardtop mounting space, visibility position, and wiring access.\u003c\/p\u003e\u003cp\u003eThe low current draw helps when the anchor light will be used for long overnight periods, and the electric lift is especially useful on boats where the hardtop carries several accessories. It suits owners who want a clean hardtop installation and helm-controlled movement without adding a separate manual pole or removable light.\u003c\/p\u003e\u003ch6\u003eMaterials and maintenance\u003c\/h6\u003e\u003cp\u003eThe machined and anodized aluminum body is appropriate for an exposed marine mounting point, but it should still be rinsed and cleaned as part of normal saltwater maintenance. Keep the moving parts free of salt buildup, avoid harsh cleaners around the finish and wiring, and check fasteners and wire strain relief during routine service.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eElectric anchor and stern light mount\u003c\/li\u003e\n\u003cli\u003eTube and light assembly\u003c\/li\u003e\n\u003cli\u003eLead for 12V DC light power\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079764149,"sku":"QBP609662","price":1428.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331534_qbp609662.jpg?v=1780191678"},{"product_id":"qbp627874","title":"TACO Marine Grand Slam 390 Outrigger Mount, 180° Handle, For 1-1\/2 in Outriggers, 45° Lift, 316L SS","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-390-180 is a Grand Slam 390 heavy-duty outrigger mount with a 180 degree fore-facing handle for T-tops that need extra hand clearance. It is built for 1-1\/2-inch outriggers and is a strong match for larger, faster center console boats in the 25' to 40' range where outrigger control needs to stay accessible from the deck.\u003c\/p\u003e\u003cp\u003eThis mount lets the crew handle vertical lift and horizontal rotation from below the T-top, which is useful when setting lines, clearing gear, or adjusting the spread while offshore. The 45 degree upward lift angle, secure pin-locking technology, and strong locking head help keep the outrigger positioned where it needs to be during active fishing.\u003c\/p\u003e\u003cp\u003eThe construction combines cast stainless steel Type-316L with machined aluminum, giving the mount the strength needed for saltwater use, vibration, and the torque created by longer outrigger poles. It works with TACO Deluxe Aluminum and Carbon Fiber Tele-Outriggers and supports T-top thickness up to 2-5\/8 inches.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHeavy-duty Grand Slam 390 outrigger mount made for 1-1\/2-inch outrigger poles.\u003c\/li\u003e\n\u003cli\u003e180 degree fore-facing handle gives better hand clearance on T-tops where a standard handle layout is tight.\u003c\/li\u003e\n\u003cli\u003eControls vertical lift and horizontal rotation from under the T-top, helping the crew adjust the spread from the deck.\u003c\/li\u003e\n\u003cli\u003e45 degree upward lift angle for practical outrigger deployment and stowage.\u003c\/li\u003e\n\u003cli\u003eStronger gusset support and thicker arm help manage the torque from longer outrigger poles.\u003c\/li\u003e\n\u003cli\u003eSecure pin-locking technology and a strong locking head help hold the outrigger in position.\u003c\/li\u003e\n\u003cli\u003eCast stainless steel Type-316L and machined aluminum construction suited to saltwater fishing environments.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO Deluxe Aluminum and Carbon Fiber Tele-Outriggers.\u003c\/li\u003e\n\u003cli\u003eFits T-tops with a maximum thickness of 2-5\/8 inches.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis mount is intended for T-top outrigger installations on center console fishing boats, especially boats where the crew needs to operate the outriggers without climbing or reaching above the top. Before installation, confirm the T-top structure, mounting area, backing support, and 2-5\/8-inch maximum top thickness.\u003c\/p\u003e\u003cp\u003eBecause outrigger mounts carry high leverage loads, the mounting surface should be solid, properly backed, and aligned so the handle can move freely. The 180 degree handle layout is useful when nearby pipework, hardtop shape, electronics boxes, or helm clearance make a standard handle position harder to use.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThe GS-390-180 pairs with TACO Deluxe Aluminum and Carbon Fiber Tele-Outriggers, making it a practical choice for offshore trolling spreads on larger center consoles. It is most relevant for crews running longer outriggers, fishing in open water, or needing fast deck-level control when lines are being deployed, adjusted, or cleared.\u003c\/p\u003e\u003cp\u003eThis mount is a good fit for anglers upgrading from a lighter outrigger base or setting up a new T-top system where strength, handle access, and clean operation matter more than a basic fixed mount.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079829685,"sku":"QBP627874","price":4099.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331535_qbp627874.jpg?v=1780191678"},{"product_id":"qbp682756","title":"TACO Marine SuproFlex Small Rub Rail End Cap, For V11-9960, Type-316L SS, Mirror Polish","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0274 is a small stainless steel end cap for finishing a SuproFlex V11-9960 rub rail at the stern of a boat. It closes off the end of the rail run and helps keep the insert seated, giving the installation a clean termination point instead of leaving the rub rail open at the transom.\u003c\/p\u003e\u003cp\u003eThis end cap is made from Type-316L stainless steel with a mirror polish finish, so it matches the look of polished stainless rub rail hardware used on exposed deck and hull areas. It is made for #8 screw fastening and is a fit-specific accessory for the SuproFlex V11-9960 profile.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO Marine SuproFlex V11-9960 rub rail installations.\u003c\/li\u003e\n\u003cli\u003eCaps the stern end of the rub rail for a finished appearance.\u003c\/li\u003e\n\u003cli\u003eHelps keep the rub rail insert intact at the end of the run.\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction suits exposed marine hardware locations.\u003c\/li\u003e\n\u003cli\u003eMirror polish finish coordinates with stainless rub rail trim.\u003c\/li\u003e\n\u003cli\u003eMade for #8 screw fastening.\u003c\/li\u003e\n\u003cli\u003eBacked by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThis part should be matched to the SuproFlex V11-9960 rub rail profile before ordering. It is not a universal end cap, so the rail profile matters more than the boat brand or model year.\u003c\/p\u003e\u003cp\u003eIt is commonly used where the rub rail terminates at the stern, including transom corners and aft rail ends where an open insert could shift or look unfinished. For a clean installation, dry-fit the cap against the rail end before fastening and make sure the insert is fully seated.\u003c\/p\u003e\u003ch6\u003eInstallation notes\u003c\/h6\u003e\u003cp\u003eInstall the cap after the rub rail and insert are positioned correctly. Use the correct #8 fastener for the mounting surface and avoid overtightening, since the cap needs to sit cleanly against the rail without distorting the surrounding trim.\u003c\/p\u003e\u003cp\u003eOn boats that see regular washdowns or salt exposure, rinse the stainless surface with fresh water as part of normal deck hardware care. The mirror polish finish can be maintained with the same non-abrasive cleaning approach used for other polished stainless fittings on board.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079862453,"sku":"QBP682756","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331542_qbp682756.jpg?v=1780191679"},{"product_id":"qbp692175","title":"TACO Marine Command Ratchet Hinges, 9-3\/8 in, Polished Type-304 Stainless Steel, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine H25-0016 is a pair of 9-3\/8 inch Command Ratchet Hinges for adjustable sunpads, bolsters, and lounge backrests on boats. Each hinge uses stainless steel construction with brass bearings, giving seating and cushion installations a controlled ratcheting action rather than a loose pivot.\u003c\/p\u003e\u003cp\u003eThe hinges lock in 15-degree increments starting at 30 degrees and ratchet through up to four positions, making them useful where a cushion or backrest needs several usable support angles. The pair is rated for a 250 lb-ft torque load in ABYC H-31 Class B applications, and the hinge geometry supports cushions up to 4 inches thick.\u003c\/p\u003e\u003cp\u003eWith a 9-3\/8 inch length, 3 inch width, and .10 inch gauge, this set is sized for serious seating hardware rather than light cabinetry. The hinges return to the horizontal position at 100 degrees and are countersunk for #10 fasteners or 1\/4-20 bolts.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of 9-3\/8 inch Command Ratchet Hinges for marine sunpads, bolsters, and lounge backrests.\u003c\/li\u003e\n\u003cli\u003eRatcheting action locks in 15-degree increments starting at 30 degrees, with up to four usable positions.\u003c\/li\u003e\n\u003cli\u003eRated for a 250 lb-ft torque load per pair in ABYC H-31 Class B applications.\u003c\/li\u003e\n\u003cli\u003eWorks with cushions up to 4 inches thick, which helps when building or replacing upholstered deck seating.\u003c\/li\u003e\n\u003cli\u003eAll-brass bearings support smooth movement through repeated adjustment cycles.\u003c\/li\u003e\n\u003cli\u003eCountersunk mounting holes accept #10 fasteners or 1\/4-20 bolts for secure installation.\u003c\/li\u003e\n\u003cli\u003eReturns to the horizontal position at 100 degrees for a clean stowed position when the cushion or backrest is laid flat.\u003c\/li\u003e\n\u003cli\u003e5-year limited warranty for added confidence in long-term marine seating projects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThese hinges are a practical match for custom seating builds, refits, and replacement hardware where the backrest or sunpad needs to hold several angles without separate support arms. The countersunk mounting pattern suits through-bolting or screw fastening depending on the structure behind the upholstery and the load expected at the seating position.\u003c\/p\u003e\u003cp\u003eBefore installation, confirm that the mounting surface has enough backing to handle the hinge load and that the cushion thickness, swing path, and stowed angle match the layout of the boat. On high-use seating, backing plates or reinforced mounting points help spread the load across the base structure.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis hinge pair suits helm seating, cockpit lounges, aft sunpads, bow bolsters, and other upholstered areas where passengers need a repeatable reclining position. The ratcheting movement is especially useful on deck seating that gets adjusted often during cruising, fishing, or dockside lounging.\u003c\/p\u003e\u003cp\u003eThe polished finish also works well in visible seating areas where the hardware remains exposed. Regular freshwater rinsing and routine inspection of the fasteners will help keep the hinge action clean in saltwater environments.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTwo TACO Marine Command Ratchet Hinges\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079895221,"sku":"QBP692175","price":609.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331395_qbp692175.jpg?v=1780191680"},{"product_id":"qbp966653","title":"TACO Marine Grand Slam Backing Plate, For GS-850 \u0026 GS-950","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine BP-850AEY is a backing plate for TACO Grand Slam GS-850 and GS-950 installations on a T-top. It is made for the mounting base area, where added support matters when outrigger hardware is exposed to vibration, boat motion, and the load changes that come with trolling or running in choppy water.\u003c\/p\u003e\u003cp\u003eThis backing plate matches the existing base hole pattern for the GS-850 and GS-950, so the installation can be completed without drilling additional holes when it is used with the correct base. For boat owners or riggers refreshing a T-top setup, it is a practical way to strengthen the mounting point while keeping the installation clean.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFits TACO Grand Slam GS-850 and GS-950 mounting applications.\u003c\/li\u003e\n\u003cli\u003eMatches the existing base hole pattern to keep installation straightforward.\u003c\/li\u003e\n\u003cli\u003eNo additional drilling is required when used with the matching GS-850 or GS-950 base.\u003c\/li\u003e\n\u003cli\u003eAdds support at the T-top mounting point for outrigger hardware.\u003c\/li\u003e\n\u003cli\u003eClean appearance for installations where the backing plate remains visible around the base area.\u003c\/li\u003e\n\u003cli\u003eCovered by a 5-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eCheck that the existing hardware is a TACO Grand Slam GS-850 or GS-950 before installation. The backing plate is meant to align with those bases, which helps avoid layout changes on the T-top and reduces the chance of unnecessary new holes in the mounting surface.\u003c\/p\u003e\u003cp\u003eAs with any T-top mounted hardware, inspect the surrounding structure before tightening the assembly. The surface should be clean, solid, and properly prepared so the backing plate can do its job at the mounting point.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis part is a good match for center consoles, sportfishing boats, and other T-top equipped vessels using GS-850 or GS-950 Grand Slam hardware. It is especially useful when the goal is to add support to an existing installation or complete a clean new mount without changing the factory hole pattern.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eTACO Marine GS-850 and GS-950 backing plate\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023079993525,"sku":"QBP966653","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331552_qbp966653.jpg?v=1780191680"},{"product_id":"qbp664959","title":"TACO Marine Pro Series GS-500 Outrigger Mounts, For Carbon Fiber Tele-Outriggers Up to 24 ft, Twist \u0026 Lock Arm","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine GS-500 is a Pro Series Grand Slam outrigger mount pair for offshore sport-fishing boats that need deck-level lift and rotation control for compatible Carbon Fiber Tele-Outriggers up to 24 ft long. It is sized for boats from 32 ft to 50 ft and uses a Twist \u0026amp; Lock pole connection, so the poles can be secured without pins or bolts.\u003c\/p\u003e\u003cp\u003eThis mount suits serious trolling spreads where crew need to deploy, adjust, and stow outriggers safely from the deck. The base uses cast stainless steel and machined aluminum, with safety detents for controlled rotation and a locking head that helps stop the outrigger poles from creeping downward while in use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwist \u0026amp; Lock pole connection secures compatible Carbon Fiber Tele-Outriggers without pins or bolts.\u003c\/li\u003e\n\u003cli\u003eDeck-level lift and rotation control keeps crew off the hardtop during setup and adjustment.\u003c\/li\u003e\n\u003cli\u003eCompatible with Carbon Fiber Tele-Outriggers up to 24 ft long.\u003c\/li\u003e\n\u003cli\u003eSuitable for offshore sport-fishing boats from 32 ft to 50 ft.\u003c\/li\u003e\n\u003cli\u003eCast stainless steel and machined aluminum construction handles the load, torque, and whip created by outrigger poles.\u003c\/li\u003e\n\u003cli\u003eSafety detents help prevent uncontrolled rotation, with controlled 180 degree rotation available when needed.\u003c\/li\u003e\n\u003cli\u003eDual-detented lifting crank handle locks flush into the base, while the outward rotation handle gives a secure grip during adjustment.\u003c\/li\u003e\n\u003cli\u003eIncludes matching 6 in x 8 in x 1\/2 in oval backing plates for added support at the mounting location.\u003c\/li\u003e\n\u003cli\u003eNo port or starboard designation, which simplifies layout and replacement planning.\u003c\/li\u003e\n\u003cli\u003eBase hole pattern matches TACO Marine Grand Slam models, which can make upgrades cleaner on boats already using that footprint.\u003c\/li\u003e\n\u003cli\u003ePairs with optional 6 degree wedge plates, sold separately, when top angle or alignment correction is needed.\u003c\/li\u003e\n\u003cli\u003eBacked by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe GS-500 is intended for hardtop and T-top outrigger installations where the mounting surface can support the load of a full offshore spread. The included oval backing plates help spread that load, but the top structure should be checked carefully before drilling, especially on older boats or tops that have been modified.\u003c\/p\u003e\u003cp\u003eBecause there is no port or starboard designation, the pair can be positioned without matching a dedicated left or right base. For arched tops or installations where pole alignment needs correction, compatible 6 degree wedge plates can be added separately.\u003c\/p\u003e\u003ch6\u003eCompatibility and use on board\u003c\/h6\u003e\u003cp\u003eThis mount is built for use with Carbon Fiber Tele-Outriggers and should not be treated as a universal outrigger base for every pole style. It is a strong match for offshore center consoles and sport-fishing boats running trolling spreads, dredges, and repeated outrigger adjustments during long days offshore.\u003c\/p\u003e\u003cp\u003eThe Twist \u0026amp; Lock connection is especially useful for crews who want a cleaner pole connection process without lining up pin holes on a moving boat. The deck-level handles also make day-to-day use more practical when the outriggers need to be raised, rotated, or stowed during changing sea conditions.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of GS-500 Grand Slam outrigger mounts\u003c\/li\u003e\n\u003cli\u003eMatching oval backing plates\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023080026293,"sku":"QBP664959","price":4471.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331360_qbp664959.jpg?v=1780191680"},{"product_id":"qbp430873","title":"TACO Marine Tele-Sun Aluminum Shade Poles, 44.6-69.37 in, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T10-7001VEL is a pair of telescoping aluminum shade poles for adding temporary shade support at the bow or stern using existing marine rod holders. Each pole telescopes from just over 44.6 in to 69.37 in tall, giving boat owners a practical way to support shade fabric over open deck areas, cockpits, sandbar setups, or lounging areas when the sun is high.\u003c\/p\u003e\u003cp\u003eThe poles are made from drawn and anodized aluminum tube, with a 1-1\/2 in main tube and a 1-1\/4 in inner tube. They install into deck-mounted rod holders using a 1\/4 in rod holder pin, then work with shade fabric that is secured to the boat top and attached to the pole ends.\u003c\/p\u003e\u003cp\u003eA nylon cleat is built in for line tension adjustment, and the tip eye bolt gives another option for securing fabric with a bungee-style clamping setup. The shade fabric and rod holders are not included, so this item is best matched to boats that already have compatible rod holders or are being outfitted with them.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of telescoping shade poles for temporary bow or stern shade support on boats.\u003c\/li\u003e\n\u003cli\u003eHeight adjusts from just over 44.6 in to 69.37 in for positioning shade fabric over the deck area.\u003c\/li\u003e\n\u003cli\u003eDrawn and anodized aluminum tube construction helps keep the poles light while adding resistance for marine use.\u003c\/li\u003e\n\u003cli\u003e1-1\/2 in main tube and 1-1\/4 in inner tube match the published pole specifications.\u003c\/li\u003e\n\u003cli\u003eInstalls into deck-mounted rod holders with a 1\/4 in pin for a secure pole base.\u003c\/li\u003e\n\u003cli\u003eNylon cleat allows line tension to be adjusted after the shade fabric is set in place.\u003c\/li\u003e\n\u003cli\u003eTip eye bolt supports an alternate fabric clamping method using a bungee cord system.\u003c\/li\u003e\n\u003cli\u003eSilver finish coordinates well with common deck hardware, rod holders, and aluminum boat fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eSetup is straightforward when the boat already has suitable rod holders in the intended mounting position. Insert the poles into the rod holders, attach the shade fabric to the boat top, connect the fabric to the pole ends, then extend the poles until the shade is sitting where it needs to be.\u003c\/p\u003e\u003cp\u003eThe poles can be used forward or aft, depending on the boat layout and where the rod holders are located. Before ordering, confirm rod holder placement, shade fabric size, line routing, and clearance around engines, antennas, outriggers, and other deck equipment.\u003c\/p\u003e\u003ch6\u003eCompatibility and fit\u003c\/h6\u003e\u003cp\u003eThe rod holder inside diameter specification is 1-1\/2 in, and the rod holder pin diameter is 1\/4 in. The poles are intended for deck-mounted rod holders, so fit depends on the rod holder style, angle, diameter, and available depth on the vessel.\u003c\/p\u003e\u003cp\u003eThese poles are a good match for boaters who want removable shade support without leaving a fixed frame on the boat. They suit day boating, fishing breaks, raft-ups, sandbar use, and dockside shade setups where quick installation and easy storage matter.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eTwo Aluminum Tele-Sun shade poles.\u003c\/li\u003e\n\u003cli\u003eCarry bag.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023080059061,"sku":"QBP430873","price":524.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331481_qbp430873.jpg?v=1780191681"},{"product_id":"qbp443269","title":"TACO Marine OT-CF Series Carbon Fiber Tele-Outrigger Poles, 1-1\/2 in, Pair","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine OT-CF Series is a pair of black carbon fiber tele-outrigger poles for offshore trolling setups that need reach, line control, and manageable weight. These poles telescope to less than 8' for bridge clearance, trailering, and storage, while the 1-1\/2\" diameter fits compatible universal mounts and TACO Marine Grand Slam GS-390 and GS-400 mounts.\u003c\/p\u003e\u003cp\u003eThe clear-coated black carbon fiber construction helps reduce weight compared with traditional aluminum outriggers, and the cylindrical pole design supports demanding trolling spreads such as dredges of ballyhoo, mullet, or squid at higher speeds. Stainless-steel Type-316L swivel rings, anodized aluminum collars, and a patented swivel roller layout help the lines track naturally as lures or bait move through the spread.\u003c\/p\u003e\u003cp\u003eThis pair is a strong match for offshore center consoles, sportfish boats, and serious coastal fishing boats where the crew needs collapsible outriggers that still have the length for a wider trolling pattern.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eSold as a pair of black carbon fiber tele-outrigger poles for offshore trolling applications.\u003c\/li\u003e\n\u003cli\u003eTelescopes to less than 8' to help with bridge clearance, storage, and trailering.\u003c\/li\u003e\n\u003cli\u003e1-1\/2\" outrigger diameter works with compatible universal mounts and TACO Marine Grand Slam GS-390 and GS-400 mounts.\u003c\/li\u003e\n\u003cli\u003eUV-resistant clear-coated black carbon fiber pole construction helps handle sun exposure in a marine environment.\u003c\/li\u003e\n\u003cli\u003eStainless-steel Type-316L swivel rings and anodized aluminum collars support long-term use around saltwater.\u003c\/li\u003e\n\u003cli\u003eDouble line layout on the 16' poles and triple line layout on the 20' poles support mono or Dacron outrigger lines.\u003c\/li\u003e\n\u003cli\u003ePatented swivel roller design lets the rollers turn toward the direction of lures or bait for a more natural spread action.\u003c\/li\u003e\n\u003cli\u003eLocking pin design holds the poles when fully extended and still allows them to collapse for storage.\u003c\/li\u003e\n\u003cli\u003eIncludes an adjustable roller line caddy with stainless steel rollers and brass bushings for rigging to a T-top or gunnel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThe product is offered in two length configurations. Both variants share the same black carbon fiber finish, 1-1\/2\" diameter, paired format, telescoping storage length under 8', and compatibility with GS-390 and GS-400 outrigger mounts.\u003c\/p\u003e\u003cp\u003eThe main differences are the extended pole length, the recommended boat size, and the outrigger line layout. The 16' version uses a double outrigger line layout, while the 20' version uses a triple outrigger line layout.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOT-3160CF: Length 16'. This version weighs 6.9 lbs each and is listed for boats up to 35' long, making it the more compact option in the range while still giving offshore trolling crews a wider spread.\u003c\/li\u003e\n\u003cli\u003eOT-4200CF: Length 20'. This version weighs 7.4 lbs each and is listed for boats up to 50' long, with a triple line layout for larger trolling spreads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThese poles are made for mounts that accept 1-1\/2\" outriggers. Before ordering, check the mount model on the boat and confirm that the mounting base, T-top, or hardtop has the clearance needed for the selected pole length when deployed and when collapsed.\u003c\/p\u003e\u003cp\u003eThe telescoping format is useful on boats that move between offshore runs, marinas, low bridges, and trailer storage. The adjustable roller line caddy helps keep the rigging organized whether it is run to the T-top or down to the gunnel.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eFor crews pulling dredges and multiple bait lines, these outriggers help widen the spread and keep lines managed away from the wake. The 16' pair suits smaller offshore boats that need reach without adding unnecessary length, while the 20' pair suits larger boats that need a broader pattern.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003ePair of carbon fiber tele-outrigger poles\u003c\/li\u003e\n\u003cli\u003eAdjustable roller line caddy with stainless steel rollers and brass bushings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"16-Inch","offer_id":52023080190133,"sku":"QBP443269-V0","price":3420.99,"currency_code":"USD","in_stock":true},{"title":"20-Inch","offer_id":52023080222901,"sku":"QBP443269-V6","price":4086.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335244_qbp443269.jpg?v=1780191681"},{"product_id":"qbp443367","title":"TACO Marine 4-Rod Deluxe Poly Rod Rack, UV-Stabilized Polyethylene, 18 in, 1-3\/4 in Rod Holders","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine P03-064 Series is a 4-rod deluxe poly rod rack for adding organized rod and tool storage to a fishing boat, center console, bay boat, skiff, or dockside rigging area. It holds four rods in a compact rack format and is made from UV-stabilized polyethylene, so it suits exposed marine locations where sun, spray, and regular washdowns are part of normal use.\u003c\/p\u003e\u003cp\u003eThis rack gives anglers a fixed place for rods, pliers, and a knife without taking up gunnel or cockpit space needed for fishing. The flared rod openings help when loading and removing rods, while the slotted rod holders help keep most conventional and spinning outfits in place during normal movement on board.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds four fishing rods in one rack, helping keep the cockpit, leaning post area, cabin bulkhead, or console side more organized.\u003c\/li\u003e\n\u003cli\u003eUV-stabilized polyethylene construction suits marine use where the rack may see sun, salt spray, and frequent cleaning.\u003c\/li\u003e\n\u003cli\u003eFlared rod holder openings make rod handling easier when rods are being stored or retrieved quickly.\u003c\/li\u003e\n\u003cli\u003eSlotted holders help secure most conventional and spinning outfits without adding a complicated locking mechanism.\u003c\/li\u003e\n\u003cli\u003eIntegrated storage slots give pliers and a knife a dedicated place near the rods.\u003c\/li\u003e\n\u003cli\u003eLightweight construction keeps the rack easy to position on flat mounting surfaces around the boat.\u003c\/li\u003e\n\u003cli\u003eAvailable in Black and White to match common cockpit, console, and storage-area finishes.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis 4-rod poly rack is offered in two color configurations. The color is the visible difference between the variants, while the 4-rod layout, UV-stabilized polyethylene construction, flared rod holder design, slotted rod holders, and integrated knife and plier storage remain consistent across the series.\u003c\/p\u003e\u003cp\u003eThe black version can blend well with darker consoles, trim, powder-coated hardware, or utility areas where scuffs are less visible. The white version is a common match for white fiberglass interiors, cockpit liners, and clean deck layouts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eP03-064B: Color Black. This version gives the rack a darker look that works well near black trim, electronics areas, leaning posts, or utility-style rigging zones.\u003c\/li\u003e\n\u003cli\u003eP03-064W: Color White. This version suits boats with white fiberglass surfaces, light cockpit interiors, or storage areas where a bright, clean visual match is preferred.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eMount the rack where rods can be reached without blocking walkways, hatches, engine access, or casting space. Common locations include a console side, cockpit bulkhead, cabin wall, tackle station, dock box area, or another flat surface with enough clearance for rod handles and reel bodies.\u003c\/p\u003e\u003cp\u003eBefore drilling, check the backside of the mounting surface for wiring, plumbing, fuel lines, and structural members. Use marine-appropriate fasteners for the surface material and make sure the rack sits flat so rods slide in and out without binding.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis rack is a practical fit for anglers who want rods staged and tools close by during coastal fishing, inshore trips, offshore runs, or dockside preparation. It is especially useful when loose rods would otherwise sit across seats, decks, or leaning posts where they can get stepped on or knocked around.\u003c\/p\u003e\u003cp\u003eThe simple poly construction also makes it easy to rinse after use. A freshwater washdown after saltwater trips helps keep the rack, rod handles, pliers, and nearby hardware cleaner between outings.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Black","offer_id":52023080321205,"sku":"QBP443367-V5","price":97.99,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":52023080353973,"sku":"QBP443367-V4","price":98.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335250_qbp443367.jpg?v=1780191682"},{"product_id":"qbp443498","title":"TACO Marine Cork Outrigger Line Stops, 3\/16 in Hole, 2pk","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Cork Outrigger Line Stops is a pair of cork stops for outrigger rigging, used to protect outrigger guides and release clips while helping prevent snags when baits are deployed. This is a simple part, but it matters in a trolling spread because a clean-moving outrigger line reduces hang-ups and keeps the rigging easier to manage from the cockpit.\u003c\/p\u003e\u003cp\u003eEach stop is made from cork and has a 3\/16-inch diameter hole for rigging. The range is offered in 1-1\/4-inch and 1-3\/4-inch diameters, so the main choice is the stop size that best suits the existing outrigger setup and the amount of stop surface wanted at the guide or release point.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eCork construction keeps the stop light on the outrigger line while still giving it a practical contact surface.\u003c\/li\u003e\n\u003cli\u003eHelps protect outrigger guides and release clips from direct contact during normal bait deployment.\u003c\/li\u003e\n\u003cli\u003eHelps reduce snags in outrigger guides, which is useful when setting or resetting trolling baits.\u003c\/li\u003e\n\u003cli\u003e3\/16-inch diameter rigging hole supports straightforward installation on compatible outrigger line setups.\u003c\/li\u003e\n\u003cli\u003eAvailable in 1-1\/4-inch and 1-3\/4-inch diameters for different outrigger rigging preferences.\u003c\/li\u003e\n\u003cli\u003eSold in pairs, matching the way many outrigger line stop installations are handled on port and starboard setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis product is offered in two diameter options for different outrigger rigging layouts.\u003c\/p\u003e\u003cp\u003eThe diameter changes between the variants, while the cork material, 3\/16-inch rigging hole, and pair packaging are consistent across the range.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCOK-0017-2: 1-1\/4-inch diameter. This smaller stop keeps the setup compact while still giving the outrigger line a cork stop for guide and release clip protection.\u003c\/li\u003e\n\u003cli\u003eCOK-0018-2: 1-3\/4-inch diameter. This larger stop gives more contact area at the stopping point, which can be useful on setups where a bigger stop is easier to see and handle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and use\u003c\/h6\u003e\u003cp\u003eThese stops are meant to be rigged onto the outrigger line through the center hole. Once positioned as part of the rigging, the cork stop acts as a buffer point so the line hardware is less likely to pull directly into the guide or release clip area.\u003c\/p\u003e\u003cp\u003eThey are most relevant for offshore and coastal trolling boats that use outriggers for bait presentation. For best fit, match the stop diameter to the existing outrigger layout, line path, and available clearance around the guide and release clip.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003ePair of cork outrigger line stops\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"1-1\/4-Inch","offer_id":52023080452277,"sku":"QBP443498-V8","price":8.99,"currency_code":"USD","in_stock":true},{"title":"1-3\/4-Inch","offer_id":52023080485045,"sku":"QBP443498-V1","price":20.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335406_qbp443498.jpg?v=1780191682"},{"product_id":"qbp443723","title":"TACO Marine T-Top LED Tube Light, 108 LED, IP67, Aluminum Housing","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T-Top Tube Light Aluminium is a hard-wired LED tube light for T-tops, bridges, and overhead utility lighting on boats. It combines bright white output with a secondary color light, giving the helm or cockpit practical illumination for setup, cleanup, chart reading, and low-glare use after dark.\u003c\/p\u003e\u003cp\u003eThe light uses 108 LEDs and produces 300 lumens of white light with 150 lumens from the color light. A 3-way switch on the end of the unit toggles between color, white, and off, so the lighting mode can be changed at the fixture without adding a separate control panel.\u003c\/p\u003e\u003cp\u003eAn IP67 non-submersible rating, impact-resistant polycarbonate lens, and polished anodized aluminum housing make this a strong fit for exposed marine locations that see spray, washdowns, vibration, and wake impact. The low draw of less than 0.5 amps helps reduce battery load on small boat electrical systems.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e108 LEDs with 300 lumens of white output and 150 lumens of color output for practical overhead lighting.\u003c\/li\u003e\n\u003cli\u003e3-way switch on the end of the light toggles from color to white to off.\u003c\/li\u003e\n\u003cli\u003eLow electrical draw of less than 0.5 amps for extended use without heavy battery demand.\u003c\/li\u003e\n\u003cli\u003eIP67 non-submersible rating for spray, washdowns, and wet topside locations.\u003c\/li\u003e\n\u003cli\u003eImpact-resistant polycarbonate lens helps protect the LEDs in active cockpit and helm areas.\u003c\/li\u003e\n\u003cli\u003ePolished anodized aluminum housing suits visible T-top and bridge installations.\u003c\/li\u003e\n\u003cli\u003ePre-drilled housing supports a cleaner mounting process on tops, arches, and similar overhead structures.\u003c\/li\u003e\n\u003cli\u003e14-foot wiring cable gives installers extra reach for routing through most tops and bridges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis T-Top Tube Light is offered in two lighting configurations. Both versions use the same tube-light format with white output plus one secondary color output.\u003c\/p\u003e\u003cp\u003eThe variant difference is the secondary LED color. The white output is used for general task lighting, while the color output gives the cockpit or helm a lower-glare lighting mode for nighttime use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF38-2050B-1: White\/Blue light. The blue mode adds a cooler accent light that works well around T-tops, cockpit areas, and overhead utility locations.\u003c\/li\u003e\n\u003cli\u003eF38-2050R-1: White\/Red light. The red mode is useful around the helm when a softer nighttime light is preferred for chart reading and instrument-area visibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and setup\u003c\/h6\u003e\u003cp\u003eThis is a hard-wired light, so installation should be planned around the boat's DC lighting circuit, switching needs, cable routing, and overcurrent protection already used on board. The 14-foot cable is helpful when routing through a T-top frame, bridge structure, or overhead mounting area before tying into the vessel wiring.\u003c\/p\u003e\u003cp\u003eThe pre-drilled housing reduces layout work during mounting, but the surface should still be checked for clearance, drainage, wire exit position, and access for future service. On aluminum tops or arches, installers should use hardware and isolation practices that suit the surrounding materials and the saltwater environment.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis light is a good match for center consoles, fishing boats, and cruising boats that need overhead lighting near the helm, cockpit, T-top, or bridge. White light helps with rigging tackle, checking gear, or cleaning up after a run, while the secondary color mode gives a gentler option when full white light is not needed.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"White\/Blue","offer_id":52023080550581,"sku":"QBP443723-V8","price":265.99,"currency_code":"USD","in_stock":false},{"title":"White\/Red","offer_id":52023080583349,"sku":"QBP443723-V2","price":265.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335307_qbp443723.jpg?v=1780191683"},{"product_id":"qbp443918","title":"TACO Marine T-Top LED Tube Light, 108 LEDs, IP67, 1.5 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine T-Top LED Tube Light is a hard-wired LED replacement light for standard T-top tube light housings on boats. It uses 108 LEDs and is available with either white and blue light or white and red light, giving the helm, cockpit, engine room, or arch area a practical mix of general illumination and low-glare color light.\u003c\/p\u003e\u003cp\u003eWhite output is rated at 300 lumens, with color output rated at 150 lumens. The light draws less than 0.5 amps, includes a 3-way switch on the end of the housing for color, white, and off, and has an IP67 waterproof, non-submersible rating for spray, washdowns, and exposed marine locations.\u003c\/p\u003e\u003cp\u003eThe 1.5-inch diameter housing works as a replacement for many existing fluorescent T-top light housings, which makes it useful when updating older lighting without changing the whole mounting setup.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e108 LED layout with white light plus a second low-glare color light for night use around the helm or cockpit.\u003c\/li\u003e\n\u003cli\u003e300 lumens from the white LEDs and 150 lumens from the color LEDs for a clear difference between task lighting and softer night lighting.\u003c\/li\u003e\n\u003cli\u003e3-way switch at the end of the light toggles between color light, white light, and off.\u003c\/li\u003e\n\u003cli\u003eLow draw of less than 0.5 amps helps limit battery use during evening checks, rigging, cleanup, or dockside work.\u003c\/li\u003e\n\u003cli\u003eIP67 waterproof, non-submersible rating suits areas exposed to spray and washdowns.\u003c\/li\u003e\n\u003cli\u003eImpact-resistant polycarbonate lens helps protect the light in active areas such as T-tops, arches, and engine spaces.\u003c\/li\u003e\n\u003cli\u003e14-foot wiring cable gives installers room to route the hard-wired connection cleanly through tubing or overhead structure.\u003c\/li\u003e\n\u003cli\u003eMounting clips are included for installation on compatible tube light mounting points.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis T-top tube light is offered in two color configurations. Both versions use the same 108 LED tube light format, 1.5-inch diameter, hard-wired installation, end-mounted 3-way switch, low current draw, IP67 waterproof non-submersible rating, polycarbonate lens, and 14-foot wiring cable.\u003c\/p\u003e\u003cp\u003eThe difference between the variants is the secondary light color. White light is used for general visibility, while the blue or red option gives a lower-glare light choice for night running, chart checks, cockpit activity, or helm-area use when full white light is not wanted.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF38-2060B-1: White with blue light. The blue setting gives the boat a clean accent light while still keeping the white output available for work light use.\u003c\/li\u003e\n\u003cli\u003eF38-2060R-1: White with red light. The red setting is a common choice for chart reading and night use around the helm because it is easier on the eyes than full white light.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis is a hard-wired tube light, so installation should be planned around wire routing, switch access, and the existing T-top or arch structure. The 14-foot wiring cable gives enough length for many overhead installs, but the route should still be checked before removal of the old light.\u003c\/p\u003e\u003cp\u003eThe universal replacement format is meant for many standard fluorescent T-top light housings. Before ordering, compare the 1.5-inch diameter, mounting point layout, and available wiring path with the light currently on the boat.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis light is a strong match for center consoles, fishing boats, and cruising boats that need overhead lighting under a T-top, on an arch, or in an engine room. The white setting works well for cleanup, rigging, inspections, and general visibility, while the color setting is useful when a softer light is preferred after dark.\u003c\/p\u003e\u003cp\u003eBecause the housing is rated for spray and washdowns but is not submersible, it belongs in exposed above-deck or protected machinery spaces rather than locations where it may sit underwater.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"White\/Blue","offer_id":52023080681653,"sku":"QBP443918-V9","price":151.99,"currency_code":"USD","in_stock":true},{"title":"White\/Red","offer_id":52023080714421,"sku":"QBP443918-V5","price":151.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335310_qbp443918.jpg?v=1780191683"},{"product_id":"qbp444285","title":"TACO Marine Poly Filet Table, Adjustable Gunnel Mount, FDA-Approved White HDPE","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine Poly Filet Table is an adjustable white cutting and prep table for fishing boats, offered in 20-inch and 32-inch sizes for use in a standard gunnel rod holder. The table surface is FDA-approved, UV-stabilized, high-density polyethylene with 1\/2-inch thickness, giving anglers a washdown-friendly place to cut bait, filet fish, or serve food and drinks without using a cooler lid, livewell hatch, or gunnel as a work surface.\u003c\/p\u003e\u003cp\u003eThe adjustable gunnel mount uses a glass-reinforced nylon tilt mount with a brushed bright-dip anodized aluminum pipe, so the table can sit in common rod-holder locations around the cockpit. Drainage openings help water and fish residue run off during cleanup, while molded storage keeps a filet knife and pliers close without leaving them loose on deck.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eFDA-approved, UV-stabilized, high-density polyethylene surface resists discoloration, cracking, mildew, and fish odor absorption.\u003c\/li\u003e\n\u003cli\u003e1\/2-inch table thickness gives the cutting surface a solid feel when working fish or bait at the rail.\u003c\/li\u003e\n\u003cli\u003eDrainage openings help rinse water and debris clear the table instead of pooling on the surface.\u003c\/li\u003e\n\u003cli\u003eBuilt-in holder keeps a filet knife and pliers within reach while freeing up deck and bait-prep space.\u003c\/li\u003e\n\u003cli\u003eAnodized aluminum mounting pipe fits standard gunnel rod holders, with a glass-reinforced nylon tilt mount for angle adjustment.\u003c\/li\u003e\n\u003cli\u003eQuick-release ergonomic knob lets the table angle be adjusted and allows the unit to fold flat for storage under deck.\u003c\/li\u003e\n\u003cli\u003eStainless fasteners support use in wet cockpit conditions and simplify assembly.\u003c\/li\u003e\n\u003cli\u003ePosition washer can be turned 1\/4 turn to add six resting angles for the table surface.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a limited one-year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis poly filet table is offered in two width configurations with the same white finish and adjustable gunnel-mount layout.\u003c\/p\u003e\u003cp\u003eThe size is the main difference between the variants. The smaller table keeps the footprint tighter for cockpits where rail space is limited, while the larger table gives more prep surface for bigger fish, multiple baits, or serving at the dock.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eP01-2120W: 20-inch size. This configuration gives a 20-inch by 12-inch work surface, which suits boats that need a compact prep station that can stow flat when the fishing is done.\u003c\/li\u003e\n\u003cli\u003eP01-2132W: 32-inch size. This configuration gives a wider table surface for more working room when cleaning fish, cutting bait, or using the table as a temporary serving surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and use on board\u003c\/h6\u003e\u003cp\u003eThe table is meant for gunnel rod-holder mounting rather than permanent deck or bulkhead installation. Set the mounting pipe into a standard rod holder, adjust the table angle with the knob, and position the surface so rinse water drains away from the cockpit working area.\u003c\/p\u003e\u003cp\u003eIt is a practical match for center consoles, walkarounds, bay boats, and fishing cockpits where a removable prep station is more useful than a fixed cutting board. When the table is not in use, it folds flat for storage under deck or in another protected onboard locker.\u003c\/p\u003e\u003ch6\u003eCare and maintenance\u003c\/h6\u003e\u003cp\u003eRinse the table after cutting bait or cleaning fish, especially after saltwater use or contact with blood and scales. The polyethylene surface does not absorb fish odors, and the drainage openings make routine cleanup easier with fresh water and mild boat-safe soap.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"20-Inch","offer_id":52023080747189,"sku":"QBP444285-V3","price":234.99,"currency_code":"USD","in_stock":false},{"title":"32-Inch","offer_id":52023080779957,"sku":"QBP444285-V4","price":304.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335313_qbp444285.jpg?v=1780191683"},{"product_id":"qbp444335","title":"TACO Marine 18 ft Deluxe Aluminum Tele-Outrigger Poles, Pair, For GS-280\/2801\/380\/390\/400 Mounts, 1-1\/2 in Butt, 360 Degree Swivel Collars","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine OT-0318HD is a pair of 18' deluxe aluminum telescoping outrigger poles with roller bearing halyard pulleys for offshore trolling. These poles extend to 18' to widen the trolling spread and collapse to 7' 11\" for trailering, storage, and bridge clearance.\u003c\/p\u003e\u003cp\u003eEach 3-piece pole fits a standard 1-1\/2\" outrigger base and uses patented 360º swivel collars to help natural baits track cleanly while reducing halyard friction. Solid Delrin support bearings, linear lock pins, and increased aluminum wall thickness make the set a practical fit for center consoles and sport-fishing boats that see regular offshore use.\u003c\/p\u003e\u003cp\u003eThe poles pair with TACO Grand Slam 280, 2801, 380, 390, and 400 series outrigger bases. They are sold as a pair and are available in two finish combinations to match common hardtop, tower, and outrigger mount setups.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e18' extended length increases the trolling spread for offshore fishing and bait presentation.\u003c\/li\u003e\n\u003cli\u003eCollapses to 7' 11\" for easier storage, trailering, and bridge clearance.\u003c\/li\u003e\n\u003cli\u003e3-piece telescoping aluminum construction fits a standard 1-1\/2\" base.\u003c\/li\u003e\n\u003cli\u003ePatented 360º swivel collars help the halyard move smoothly and keep bait action more natural.\u003c\/li\u003e\n\u003cli\u003eRoller bearing halyard pulleys reduce friction during deployment and adjustment.\u003c\/li\u003e\n\u003cli\u003eSolid Delrin support bearings and linear lock pins support smooth extension and collapse.\u003c\/li\u003e\n\u003cli\u003eAdditional swivel collar helps separate halyard lines while fishing.\u003c\/li\u003e\n\u003cli\u003eCompatible with TACO Grand Slam 280, 2801, 380, 390, and 400 series outrigger bases.\u003c\/li\u003e\n\u003cli\u003eSold in pairs for port and starboard installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eVariants\u003c\/h6\u003e\u003cp\u003eThis outrigger pole set is offered in two finish configurations. Both variants share the same 18' extended length, 7' 11\" collapsed length, 1-1\/2\" butt diameter, telescoping design, and roller-equipped halyard layout.\u003c\/p\u003e\u003cp\u003eThe finish is the main difference between the configurations, so selection comes down to how the poles should look with the boat's mounts, hardtop, tower, and existing hardware.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOT-0318HD-VEL: Color Silver\/Silver. This version keeps a silver finish across the pole and visible trim, giving the setup a clean match with many polished or light aluminum outrigger installations.\u003c\/li\u003e\n\u003cli\u003eOT-0318HD-BKA: Color Silver\/Black. This version combines silver and black for boats with black accents, powder-coated hardware, or darker tower and top details.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThese poles are intended for boats already set up, or being set up, with compatible 1-1\/2\" outrigger bases. Confirm the mount series, base size, roof or gunwale clearance, and storage path before ordering, especially on trailerable boats or vessels that regularly pass under fixed bridges.\u003c\/p\u003e\u003cp\u003eBecause the poles collapse below 8', they are easier to handle when the boat is being stored, moved on a trailer, or prepared at the dock. The telescoping layout also helps reduce the amount of long gear that has to remain exposed when the boat is not actively fishing.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis set is a good match for offshore trolling where wider bait spacing, cleaner halyard movement, and a pair of longer poles matter more than a compact inshore setup. The roller and swivel collar arrangement is useful when running natural baits and when the crew needs smoother halyard operation during repeated adjustments.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\u003cli\u003eOne pair of 18' deluxe aluminum tele-outrigger poles with rollers.\u003c\/li\u003e\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Silver\/Silver","offer_id":52023080812725,"sku":"QBP444335-V5","price":1842.99,"currency_code":"USD","in_stock":true},{"title":"Silver\/Black","offer_id":52023080845493,"sku":"QBP444335-V0","price":1759.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1335315_qbp444335.jpg?v=1780191684"},{"product_id":"qbp420707","title":"TACO Marine Universal Removable Leaning Post Backrest, For Neptune Premium and Neptune II Leaning Posts, Adjustable Folding Arms","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine L10-1002-1 is a universal removable leaning post backrest for adding back support to a center console, fishing boat, or other vessel with a compatible leaning post. It has a white cushioned backrest, adjustable folding arms, and a compact 34\" width that suits many common helm seating layouts without turning the cockpit into a crowded workspace.\u003c\/p\u003e\u003cp\u003eThis backrest is made to fit TACO Marine Neptune Premium and Neptune II leaning posts, and the adjustable arms allow it to adapt to most standard leaning posts. The cushion measures 7-3\/8\" high, with a 17-1\/2\" extended arm height, 34\" width, and 3\" depth, giving the buyer useful measurements to compare against the existing post and available clearance behind the helm.\u003c\/p\u003e\u003cp\u003eFor anglers and day boaters, the folding arm design is practical when the backrest is not needed or when space is tight around rod holders, tackle storage, or a cooler under the leaning post. The white cushion is easy to wipe down after salt spray, sunscreen, fish handling, or general cockpit use.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUniversal removable backrest for adding back support to compatible leaning posts at the helm or cockpit.\u003c\/li\u003e\n\u003cli\u003eFits TACO Marine Neptune Premium and Neptune II leaning posts, with adjustable arms for many standard leaning posts.\u003c\/li\u003e\n\u003cli\u003e34\" wide cushion with 7-3\/8\" cushion height, 3\" depth, and 17-1\/2\" extended arm height for fit checking before installation.\u003c\/li\u003e\n\u003cli\u003eAdjustable arms install at the desired width to work with leaning post rod holder layouts.\u003c\/li\u003e\n\u003cli\u003eFolding arms help reduce the storage footprint when the backrest is not in use.\u003c\/li\u003e\n\u003cli\u003eWhite cushioned surface adds support while staying simple to clean after normal marine use.\u003c\/li\u003e\n\u003cli\u003eMounting hardware is included for installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and covered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eBefore installation, compare the 34\" overall width and 3\" depth with the available space around the leaning post, rod holders, console, and aft cockpit traffic path. The adjustable arms are useful when matching the backrest to different rod holder spacing, but the post still needs enough clearance for the arms to fold and for the cushion to sit comfortably behind the user.\u003c\/p\u003e\u003cp\u003eThis is a practical upgrade for boats where the leaning post is already in the right position but lacks back support for longer runs, trolling, drifting, or standing and leaning at the helm. It works especially well on center consoles and fishing boats where cockpit space matters and removable or folding seating hardware is preferred over a fixed seat back.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the backrest and mounting areas with fresh water and wipe the white cushion clean before storage. Keeping the folding arms free of salt buildup helps the mechanism move smoothly and makes the backrest easier to handle when it is folded away between trips.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eUniversal removable leaning post backrest\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023088382133,"sku":"QBP420707","price":495.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331518_qbp420707.jpg?v=1780191695"},{"product_id":"qbp137277","title":"TACO Marine Neptune Leaning Post Tackle Storage Bag, 1000 Denier Fabric, Ballistic Nylon Bottom, YKK Marine Grade Zippers","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine L10-1003BAG is a Neptune tackle storage bag for adding organized, removable tackle storage under a leaning post or using it as a standalone gear bag on board. It is made with 1000 Denier fabric, a ballistic nylon bottom, and YKK marine-grade zippers, giving anglers a practical way to keep tackle protected from the normal abuse of saltwater fishing, dock loading, and repeated trips on and off the boat.\u003c\/p\u003e\u003cp\u003eThe layout is built around fishing gear that needs to stay sorted and easy to reach. It has two double-zippered outside pockets for fluorocarbon spools, two 9 inch inner pockets for personal items, a 29 inch tool compartment for long tackle tools, and a large center storage area sized to carry four full-size Plano 3700 boxes, four Plano 3600 boxes, and four smaller Plano boxes.\u003c\/p\u003e\u003cp\u003eThis bag works well for center-console owners, traveling anglers, and anyone who wants tackle storage that can move from home to boat, then come off the boat again for security or cleanup. The carbon gray fabric with black trim keeps the look clean around a leaning post, while the hard shell bottom liner, six rubber feet, and drain holes help the bag sit properly in a wet cockpit or fishing area.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003e1000 Denier fabric helps the bag handle saltwater fishing use, dock handling, and regular transport.\u003c\/li\u003e\n\u003cli\u003eBallistic nylon bottom adds a waterproof barrier where the bag is most likely to sit on wet deck surfaces.\u003c\/li\u003e\n\u003cli\u003eYKK marine-grade zippers are used for the main storage areas and pockets.\u003c\/li\u003e\n\u003cli\u003eTwo double-zippered outer pockets hold up to five fluorocarbon spools for quick access while rigging.\u003c\/li\u003e\n\u003cli\u003eTwo 9 inch inner pockets give space for small personal items that should stay separate from tackle boxes.\u003c\/li\u003e\n\u003cli\u003e29 inch long tool compartment keeps pliers, knives, dehookers, and other long tackle tools in one place.\u003c\/li\u003e\n\u003cli\u003eCenter compartment fits multiple Plano tackle boxes, including 3700, 3600, and smaller box sizes.\u003c\/li\u003e\n\u003cli\u003eShoulder carrying strap makes the bag easier to move between home, dock, boat, and storage.\u003c\/li\u003e\n\u003cli\u003eWelt track clips allow the bag to hang from a compatible TACO Marine leaning post setup.\u003c\/li\u003e\n\u003cli\u003eHard shell bottom liner with six rubber feet and drain holes helps the bag stay off wet surfaces and release standing water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eFit and use on board\u003c\/h6\u003e\u003cp\u003eThe Neptune bag is a strong match for boats where the area below the leaning post is underused or where loose tackle boxes tend to slide around the deck. It can hang from a compatible TACO Marine leaning post using the welt track clips, or it can be carried as a separate tackle system when the boat layout does not call for a fixed installation.\u003c\/p\u003e\u003cp\u003eBecause the bag is removable, it is useful for anglers who trailer their boat, fish from different vessels, or prefer to take tackle off the boat at the end of the day. It also helps keep the cockpit cleaner by grouping leader spools, tackle trays, tools, and smaller personal items into one organized storage point.\u003c\/p\u003e\u003ch6\u003eStorage layout\u003c\/h6\u003e\u003cp\u003eThe outer pockets are positioned for items that are reached often, such as leader spools and small rigging supplies. The inner 9 inch pockets work better for items that should stay tucked away, while the long tool compartment keeps fishing tools from mixing with trays in the main compartment.\u003c\/p\u003e\u003cp\u003eThe center section is the main tackle box area and has enough capacity for a mixed set of Plano boxes. That makes it practical for inshore and offshore anglers who carry different terminal tackle, lures, hooks, and rigging parts but still want a single bag that can be removed from the boat when the trip is over.\u003c\/p\u003e\u003ch6\u003eConstruction and care\u003c\/h6\u003e\u003cp\u003eThe fabric, bottom material, zippers, drain holes, and rubber feet all suit the way a tackle bag is actually used around a boat, where it may sit on a wet deck, get rinsed, or be handled with wet hands. After use in saltwater, rinse off salt and grit, let the bag drain, and allow it to dry open before long-term storage.\u003c\/p\u003e\u003cp\u003eFor best day-to-day use, avoid leaving wet tackle, hooks, or tools sealed inside the bag after fishing. Keeping the zippers clean and the compartments dry will help the bag stay easier to use across repeated trips.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023088414901,"sku":"QBP137277","price":626.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331521_qbp137277.jpg?v=1780191696"},{"product_id":"qbp138205","title":"TACO Marine Outrigger Line Tensioner, SS316, 1 to 2-1\/2 in Gunnels, Ronstan Cam Cleat, 1\/8 to 1\/4 in Rope","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0204-1 is an outrigger line tensioner for keeping gunwale-rigged halyard lines tight and properly extended on larger fishing boats. It is built around a stainless steel mushroom-style tensioning point with a Ronstan medium cam cleat, giving double or triple outrigger line setups a clean way to hold line tension without relying on raised camel-back cleats.\u003c\/p\u003e\u003cp\u003eThis tensioner fits boats with 1\" to 2-1\/2\" thick gunnels and installs through the gunnel with a 3\/4\" drill bit. The cam cleat works with 1\/8\" to 1\/2\" rope, making it useful for common outrigger halyard setups on center consoles and sport fishing boats where lines need to stay organized, tight, and easy to adjust during a fishing day.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHelps maintain tension on outrigger halyard lines so pulley blocks stay locked in place and the lines remain fully extended.\u003c\/li\u003e\n\u003cli\u003eSuited for larger boats running double or triple lines on each outrigger.\u003c\/li\u003e\n\u003cli\u003eStainless Steel Type 316 construction supports use in saltwater environments where corrosion resistance matters.\u003c\/li\u003e\n\u003cli\u003eAdjustable fit for 1\" to 2-1\/2\" thick gunnels.\u003c\/li\u003e\n\u003cli\u003eInstalls through the gunnel using a 3\/4\" drill bit.\u003c\/li\u003e\n\u003cli\u003eRonstan medium cam cleat accepts 1\/8\" to 1\/2\" rope for practical line handling.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty lock washer helps reduce loosening from vibration while underway.\u003c\/li\u003e\n\u003cli\u003eElectro-polished bracket with countersunk mounting holes gives the installation a clean finished look.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe unit is intended for through-gunnel installation, so the mounting area should be checked for thickness, access, and backing before drilling. Its adjustable design covers gunnels from 1\" to 2-1\/2\" thick, which makes it a practical match for many larger center consoles and sport fishing boats with gunwale-mounted outrigger halyards.\u003c\/p\u003e\u003cp\u003eThe stainless mushroom head and cam cleat layout keep the working line close at hand while reducing the raised hardware profile compared with traditional camel-back cleats. That matters in areas where crew move around the cockpit and gunwale during trolling, clearing lines, or fighting fish.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis tensioner is a good match for anglers who want cleaner outrigger rigging and more controlled halyard tension on boats that fish offshore or run multiple outrigger lines. It is especially useful where line tension needs to be adjusted quickly but the deck and gunwale still need to stay uncluttered.\u003c\/p\u003e\u003ch6\u003eWhat’s included\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eOutrigger line tensioner\u003c\/li\u003e\n\u003cli\u003e18-8 stainless steel mounting hardware\u003c\/li\u003e\n\u003cli\u003eHeavy-duty lock washer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023088480437,"sku":"QBP138205","price":233.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331527_qbp138205.jpg?v=1780191696"},{"product_id":"qbp508598","title":"TACO Marine Pontoon Fender Lock, SS316, 1 in Button, Fits 1 in to 1-1\/4 in Square Tubes","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F16-0220-1 is a pontoon fender lock for keeping fender lines set at a repeatable length along square pontoon railing. It gives pontoon owners a cleaner way to hang fenders at the dock without retying lines every time the boat comes in, which is especially useful when docking height stays consistent at a home slip or marina berth.\u003c\/p\u003e\u003cp\u003eThis fender lock is made from Type-316L stainless steel and fits 1\" to 1-1\/4\" square tube. The locking pin uses a 1\" diameter button, and the nylon ring washer separates dissimilar metals to help reduce corrosion concerns where hardware meets the rail.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eMade for pontoon boats with 1\" to 1-1\/4\" square tube railing.\u003c\/li\u003e\n\u003cli\u003eType-316L stainless steel construction suits wet dockside use and saltwater exposure.\u003c\/li\u003e\n\u003cli\u003e1\" diameter button gives the locking pin a broad surface for quick handling.\u003c\/li\u003e\n\u003cli\u003eHelps keep fender lines at a consistent hanging length once the line is set.\u003c\/li\u003e\n\u003cli\u003eNylon ring washer separates dissimilar metals at the mounting point.\u003c\/li\u003e\n\u003cli\u003eFastens from the bottom of the square tube for a clean top-side installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThe fitting mounts through the square rail tube, with the receiver seated from the top and the fastener installed from below. Before drilling, check that the chosen rail location is clear of wiring or other obstructions inside the tube.\u003c\/p\u003e\u003cp\u003eFor a straight installation, mark the center of the rail, drill a pilot hole through the tube, then enlarge the top opening for the receiver and the bottom opening for the mounting fastener. Deburring the drilled edges helps the gasket and hardware sit properly and reduces sharp edges around the line area.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis fender lock is a practical match for pontoon owners who dock frequently and want fenders to land in the same position each time. Once the fender line is tied to the pin at the preferred height, docking becomes a matter of inserting the pin into the receiver rather than adjusting the line from scratch.\u003c\/p\u003e\u003cp\u003eIt works well for marina slips, fuel docks, restaurant docks, and repeat docking situations where fast fender placement helps protect the pontoon rail and side panels from contact.\u003c\/p\u003e\u003ch6\u003eCare and maintenance\u003c\/h6\u003e\u003cp\u003eRinse the hardware with fresh water after saltwater use, and keep the receiver clear of grit, dried salt, and debris. Periodically check that the mounting fastener remains snug, but avoid over-tightening, as excess torque can distort square tubing.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023088513205,"sku":"QBP508598","price":114.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331878_qbp508598.jpg?v=1780191697"},{"product_id":"qbp236322","title":"TACO Marine Aluminum\/Poly 3-Rod Rack Holder, Brite-Dipped Anodized Finish, PVC White Liner","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-3103BXZ-1 is a 3-rod aluminum and poly rod rack for organizing light- to medium-tackle spinning rod and reel combos on board. It gives anglers a fixed storage point for rods in the cockpit, leaning post area, cabin entry, or another protected mounting location where loose tackle can get in the way.\u003c\/p\u003e\u003cp\u003eThe rack uses a brushed aluminum finish with poly rod supports and a form-fitted white PVC liner to help separate the rods from the holder surfaces. Each rod position has a 1-1\/2\" inside diameter, and the rack length is 13-3\/8\", making it a compact option for boats that need three ready storage spots without taking over the working deck.\u003c\/p\u003e\u003cp\u003eSlotted rod positions help lock rods and reels into place while the integrated knife and plier slots keep common fishing tools close at hand. Recessed fasteners help the rack sit cleanly once installed, which matters in areas where lines, clothing, or hands may brush past the holder during a day of fishing.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds three rods in a surface-mount rack layout for cockpit, cabin, console, or gear-station storage.\u003c\/li\u003e\n\u003cli\u003e1-1\/2\" rod holder inside diameter suits light- to medium-tackle spinning rod and reel combos.\u003c\/li\u003e\n\u003cli\u003e13-3\/8\" rack length helps fit three rod positions into a compact storage footprint.\u003c\/li\u003e\n\u003cli\u003eBrushed aluminum finish with poly racks gives the holder a clean look for visible mounting areas.\u003c\/li\u003e\n\u003cli\u003eSlotted rod positions help keep rods and reels from shifting while the boat is moving.\u003c\/li\u003e\n\u003cli\u003eForm-fitted white PVC liner helps protect rods where they sit in the rack.\u003c\/li\u003e\n\u003cli\u003eIntegrated knife and plier slots keep frequently used fishing tools organized near the rods.\u003c\/li\u003e\n\u003cli\u003eRecessed fasteners reduce exposed hardware and support a neater finished installation.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and backed by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and placement\u003c\/h6\u003e\u003cp\u003eThis rod rack is meant for a fixed surface-mount installation, so the mounting area should be flat, strong, and easy to reach while fishing. Common locations include a cockpit side panel, console face, cabin bulkhead, leaning post area, or a tackle station where rods can stay vertical and out of the deck traffic path.\u003c\/p\u003e\u003cp\u003eBefore drilling, check the clearance behind the mounting surface and confirm that the rods and reels will not interfere with seating, hatches, controls, canvas, or walkways. A dry fit with the rods in place is useful because reel size and handle orientation can change how much working space the rack needs.\u003c\/p\u003e\u003ch6\u003eUse cases on board\u003c\/h6\u003e\u003cp\u003eThis rack fits boats that need practical storage for a few spinning outfits without moving to a larger multi-rod system. It works well for coastal fishing, bay boats, center consoles, family fishing boats, and dockside storage where keeping rods upright and easy to grab is more important than adding flush-mounted rod holders.\u003c\/p\u003e\u003cp\u003eIt is a good match for anglers who want rod storage plus space for a knife and pliers in one tidy location. The 3-rod layout keeps the setup simple and readable, which helps when the crew is changing rigs, clearing the deck, or putting gear away after a run.\u003c\/p\u003e\u003ch6\u003eMaintenance and care\u003c\/h6\u003e\u003cp\u003eAfter saltwater use, rinse the rack with fresh water and wipe away trapped salt around the slots, liner, and fastener recesses. Keeping the holder clean helps preserve the finish and keeps rods sliding in and out without grit rubbing against the liner or reel seats.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023088677045,"sku":"QBP236322","price":249.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331556_qbp236322.jpg?v=1780191697"},{"product_id":"qbp224063","title":"TACO Marine 4-Rod Aluminum Poly Rod Rack, 1-1\/2 in ID, 18 in","description":"\u003ch6\u003eOverview\u003c\/h6\u003e\u003cp\u003eThe TACO Marine F31-3104BXZ-1 is a surface-mount 4-rod aluminum and poly rack for organizing light to medium tackle spinning rod and reel combos on board. It gives anglers a fixed storage point for up to four rods, with slotted poly racks that hold rods and reels in place when the boat is at rest, at the dock, or moving between fishing spots.\u003c\/p\u003e\u003cp\u003eThe rack has a brite-dipped, sanded and anodized brushed aluminum finish, white PVC liners fitted inside the rod openings, and a 1-1\/2 inch rod holder inside diameter. At 18 inches long, it fits well on many cockpit, leaning post, console, bulkhead, or transom-area mounting surfaces where rods need to stay accessible without lying loose on deck.\u003c\/p\u003e\u003cp\u003eIntegrated slots for a knife and pliers help keep common fishing tools close to the rods, which is useful when rigging bait, cutting line, or handling tackle during a day on the water. Recessed fasteners keep the installation surface cleaner and reduce snag points around the rack.\u003c\/p\u003e\u003ch6\u003eKey features\u003c\/h6\u003e\u003cul\u003e\n\u003cli\u003eHolds up to four light to medium tackle spinning rod and reel combos in a fixed surface-mount rack.\u003c\/li\u003e\n\u003cli\u003eSlotted poly rack layout helps lock rods and reels into position for cleaner storage on deck or near the cockpit.\u003c\/li\u003e\n\u003cli\u003eWhite PVC liners add a protective contact surface where rods sit in the holder openings.\u003c\/li\u003e\n\u003cli\u003e1-1\/2 inch inside diameter rod openings and an 18 inch rack length give clear fit points for planning the mounting location.\u003c\/li\u003e\n\u003cli\u003eBrite-dipped, sanded and anodized brushed aluminum finish gives the rack a clean look for exposed boat areas.\u003c\/li\u003e\n\u003cli\u003eIntegrated knife and pliers slots keep frequently used fishing tools stored with the rod setup.\u003c\/li\u003e\n\u003cli\u003eRecessed fasteners support a flush installation with fewer raised edges around the rack.\u003c\/li\u003e\n\u003cli\u003eMade in the USA and covered by a 1-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch6\u003eInstallation and fit\u003c\/h6\u003e\u003cp\u003eThis rack is meant for a solid surface-mount installation. Before drilling, check that the chosen area has enough flat space for the 18 inch length, proper backing behind the mounting surface, and clearance for rods, reels, handles, and tool slots once everything is loaded.\u003c\/p\u003e\u003cp\u003eCommon mounting areas include cockpit side panels, console sides, leaning posts, transom work areas, and other places where rods can be stored upright and reached quickly. The rack is a practical match for fishing boats that need rod storage close to the action without taking up deck space.\u003c\/p\u003e\u003ch6\u003eUse on board\u003c\/h6\u003e\u003cp\u003eThis holder works well for anglers who carry multiple spinning setups and want them grouped in one place instead of spread across the cockpit. It is especially useful for coastal fishing, dockside rigging, and general rod storage between runs, where quick access and tidy organization matter more than a removable setup.\u003c\/p\u003e","brand":"TACO Marine","offers":[{"title":"Default Title","offer_id":52023088709813,"sku":"QBP224063","price":334.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/files\/1331557_qbp224063.jpg?v=1780191697"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/8171\/1029\/collections\/1279262_taco-marine.webp?v=1768106319","url":"https:\/\/www.qualityboatparts.com\/collections\/taco-marine.oembed?page=6","provider":"Quality Boat Parts","version":"1.0","type":"link"}